Hantek HT360I

Contents

Hantek HT360I Digital Metal Leeb Hardness Tester

Instruction Manual

1. Introduction

The Hantek HT360I is a portable digital metal Leeb hardness tester designed for accurate measurement of various metal materials. It utilizes the Richter hardness measurement principle and can measure materials such as steel, cast steel, alloy tool steel, stainless steel, gray cast iron, ductile iron, cast aluminum alloy, copper-zinc alloy, copper-tin alloy, pure copper, and forged steel.

This instrument allows for easy conversion between seven different hardness values: HL, HB, HRB, HRC, HRA, HV, and HS. It features a streamlined ergonomic design, a 2.8-inch high-definition color display, and supports data storage for up to 500 groups. The HT360I also offers PC connectivity via USB Type-C for data management and supports optional Bluetooth printing.

2. Package Contents

Before using your Hantek HT360I, please ensure all items are present and in good condition. The standard package includes:

  • Hantek HT360I Digital Metal Leeb Hardness Tester Unit
  • Impact Device (D-type standard)
  • USB Cable
  • Power Adapter/Charger
  • Cleaning Brush
  • Carrying Case
  • Certification Document
Hantek HT360I Hardness Tester and accessories
Figure 2.1: Hantek HT360I Hardness Tester and included accessories.
Detailed view of Hantek HT360I accessories
Figure 2.2: Detailed view of the impact device, cables, and cleaning brush.

3. Setup

3.1 Charging the Device

The HT360I is powered by a rechargeable lithium battery. Before initial use, fully charge the device using the provided USB cable and power adapter. A full charge provides approximately 80 hours of continuous operation. The device features adjustable backlight time and automatic power-saving functions to conserve battery life.

3.2 Connecting the Impact Device

Locate the impact device port on the top of the HT360I unit. Connect the cable from the impact device firmly into this port. Ensure a secure connection for accurate measurements.

Impact device connection port on Hantek HT360I
Figure 3.1: Top view showing the impact device connection port.
Hantek HT360I with impact device connected
Figure 3.2: HT360I connected to the impact device and test block.

4. Operating Instructions

4.1 Power On/Off

Press and hold the power button (usually marked with a universal power symbol) to turn the device on or off.

4.2 User Interface and Navigation

The HT360I features a 2.8-inch color display that provides rich and intuitive information. Use the navigation buttons (up, down, left, right arrows) and function keys (F1-F4) to navigate through menus and select options. The 'Esc' button typically returns to the previous screen or cancels an operation.

Front view of Hantek HT360I showing screen and buttons
Figure 4.1: Front view of the HT360I display and control panel.

4.3 Performing a Hardness Measurement

  1. Select Material: Press the 'Material' button (F1) to choose the type of metal you are testing (e.g., Cast Steel, Alloy Tool Steel, Stainless Steel, etc.).
  2. Select Hardness Scale: Use the 'Scale' button to cycle through the available hardness scales (HL, HB, HRB, HRC, HRA, HV, HS) and select the desired one.
  3. Set Impact Direction: Use the 'Direction' button to specify the impact direction. The device supports 5 different directions: vertical down, oblique down, horizontal, oblique up, and vertical up.
  4. Position Impact Device: Place the impact device firmly and perpendicularly on the surface of the material to be tested.
  5. Initiate Measurement: Press the trigger button on the impact device or the corresponding button on the tester to perform the impact. The hardness value will be displayed on the screen.
  6. Multiple Impact Tests: For improved accuracy, perform multiple impacts (typically 3-5) at different points on the sample. The device can calculate the average value.

4.4 Data Management

The HT360I can store up to 500 groups of measurement data, including measurement value, average value, date, impact direction, number of times, material, and hardness system. Use the 'Save' function (F3) to store current readings.

4.5 PC Connectivity

The device features a USB Type-C interface for connecting to a computer. This allows for convenient data storage, export, and printing using compatible Windows software.

Hantek HT360I side view with ports
Figure 4.2: Side view of the HT360I showing USB Type-C and other ports.

4.6 Product Demonstration Video

Video 4.1: A short demonstration of the Hantek HT360I Digital Metal Leeb Hardness Tester in use.

5. Maintenance

5.1 Cleaning

Regularly clean the device and impact device. Use a soft, dry cloth to wipe the main unit. For the impact device, use the provided cleaning brush to remove any debris from the impact body and probe. Do not use abrasive cleaners or solvents.

5.2 Battery Care

To prolong battery life, avoid fully discharging the battery frequently. If the device will not be used for an extended period, charge it to about 50% and store it in a cool, dry place. Recharge every few months to prevent deep discharge.

5.3 Storage

Store the HT360I in its carrying case when not in use to protect it from dust, moisture, and physical damage. Avoid storing in extreme temperatures or high humidity.

6. Troubleshooting

  • Device does not power on: Ensure the battery is charged. Connect the charger and try again. If the issue persists, contact support.
  • Inaccurate readings:
    • Check if the impact device is properly connected.
    • Ensure the correct material and hardness scale are selected.
    • Verify the impact direction is set correctly.
    • Make sure the sample surface is clean, smooth, and stable.
    • Perform multiple tests and average the results.
  • Display issues: If the screen is dim or unresponsive, try adjusting the backlight settings or restarting the device. If the problem continues, contact support.
  • Data transfer failure: Ensure the USB cable is securely connected to both the device and the computer. Check if the correct driver or software is installed on your computer.

7. Specifications

The following table outlines the technical specifications for the Hantek HT360I Digital Metal Leeb Hardness Tester:

Hantek HT360I detailed specifications
Figure 7.1: Detailed specifications and features of the HT360I.
FeatureSpecification
Measurement RangeHLD (170-960), HRC (17-69), HRB (13-100), HB (20-655), HV (80-1027), HS (26-99.5), HRA (30-88)
Hardness ScalesHL, HB, HRB, HRC, HRA, HV, HS
Measuring DirectionVertical down, oblique down, horizontal, oblique up, vertical up (5 directions)
Impact DeviceStandard D-type, supports DC, DL, D+15, G (optional)
Display2.8-inch color LCD, 640*480 Pixels
Data Storage500 groups
InterfaceUSB Type-C
Power SupplyRechargeable Lithium Battery
Continuous Working TimeApproximately 80 hours
Operating Temperature-20°C to 50°C
Storage Temperature-30°C to 60°C
Dimensions270mm x 150mm x 110mm (approximate package dimensions)
Weight1.3 kg (approximate package weight)

8. User Tips

  • For optimal accuracy, ensure the test surface is clean, smooth, and free of oxidation or coatings.
  • Always perform multiple measurements at different points on the sample and consider the average value.
  • When testing curved surfaces, ensure the impact device is held perpendicular and stable. Consider using specialized support rings if available for highly curved samples.
  • Keep the impact device clean using the provided brush to prevent debris from affecting measurements.

9. Warranty and Support

The Hantek HT360I Digital Metal Leeb Hardness Tester is designed for reliability and performance. For any technical assistance, warranty claims, or service inquiries, please refer to the contact information provided with your purchase or visit the official Hantek website. Keep your proof of purchase for warranty validation.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.