1. Introduction and Overview
The KKmoon GM8805 is a high-precision handheld carbon monoxide (CO) detector designed to measure CO gas concentration in the air. It provides continuous monitoring with a clear LCD screen and features audible and visual alarms to alert users to dangerous CO levels. This device is suitable for a wide range of applications including residential safety, industrial environments such as petroleum, chemistry, coal mining, metallurgy, paper making, firefighting, municipal administration, telecommunications, food processing, and textile industries.

2. Safety Information
WARNING: CARBON MONOXIDE IS SERIOUSLY HARMFUL TO HUMAN HEALTH, AND IT CAN LEAD TO DEATH.
- Always ensure proper ventilation in areas where carbon monoxide may be present.
- Do not rely solely on this device for life safety. It is a monitoring tool.
- Regularly check the device for proper function and battery life.
- Keep the detecting air hole clear of obstructions.
- Read this entire manual before operating the device.
3. Product Features
- Large LCD backlight digital and character display for easier reading.
- Safety indication: regular light flashing and voice indication. The buzzing voice frequency increases with higher carbon monoxide concentration.
- Excellent audible alarm.
- Low maintenance cost.
- Supports carbon monoxide detection.
- Solid shell and robust electrical characteristics.
- Automatically shuts off if not operated for 10 minutes to conserve battery.
- Review of MAX (Maximum) and MIN (Minimum) readings.
- MAX, AVG (Average), and Data Hold functions.
- Buzzer alarm setup function.

4. Components and Display
4.1. Display Elements

- Under detecting indicator
- Maximum value indicator (MAX)
- Average value indicator (AVG)
- Data hold indicator (HOLD)
- Backlight indicator
- Battery power indicator
- Carbon monoxide concentration reading
- Concentration unit (ppm)
- Temperature reading
- Temperature unit (°C/°F)
4.2. Physical Components

- Detecting Air Hole: Located at the top, this is where the CO sensor takes air samples. Keep it unobstructed.
- LCD with Backlight: Displays CO concentration, temperature, and various indicators.
- Durable Case: Provides protection for the internal components.
- Battery Cover: Located on the back, provides access to the battery compartment.
4.3. Buttons

- SCAN Button: Used to initiate or control the detection process.
- Power Switch Button: Turns the device ON or OFF.
- SET Button: Used to access and adjust settings, such as alarm thresholds or to review MAX/MIN/AVG data.
5. Setup
5.1. Battery Installation
The GM8805 requires two (2) 1.5V AAA batteries for operation. These are not included in the package.
- Locate the battery cover on the back of the device.
- Slide or unclip the battery cover to open the compartment.
- Insert two 1.5V AAA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
- Replace the battery cover, ensuring it is securely closed.

The battery power indicator (Figure 3, item 6) on the LCD will show the current battery level. Replace batteries when the indicator shows low power to ensure accurate readings.
6. Operation
6.1. Power On/Off
- Press the Power Switch button (center button, Figure 5) to turn the device ON. The LCD will light up and display readings.
- To turn OFF the device, press and hold the Power Switch button until the display turns off.
- The device will automatically shut off after 10 minutes of inactivity to save power.
6.2. Carbon Monoxide Detection
- Once powered on, the device will immediately begin detecting CO concentration in the air. The "Under detecting" indicator (Figure 3, item 1) may be active.
- The current CO concentration will be displayed in ppm (Figure 3, item 7 & 8).
- The ambient temperature will also be displayed (Figure 3, item 9 & 10).
- To manually initiate a scan or refresh readings, press the SCAN button (left button, Figure 5).
6.3. Alarm Function
- The device features an audible and visual alarm.
- When CO concentration reaches a dangerous level, the device will emit a buzzing sound and the backlight may flash.
- The frequency of the buzzing sound increases as the CO concentration rises.
- Refer to the full user manual for details on adjusting alarm thresholds (if applicable).
6.4. Data Hold, MAX, and AVG Functions
- Data Hold: Press the SET button (right button, Figure 5) briefly to freeze the current reading on the display. The "HOLD" indicator (Figure 3, item 4) will appear. Press SET again to release.
- MAX/MIN/AVG Review: While in normal operation, press and hold the SET button to cycle through Maximum (MAX), Minimum (MIN), and Average (AVG) CO concentration readings recorded since the device was powered on. The corresponding indicator (Figure 3, item 2 or 3) will appear.
7. Maintenance
- Cleaning: Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the detecting air hole is free from dust and debris.
- Battery Replacement: Replace the AAA batteries when the low battery indicator appears on the LCD. Always use fresh, high-quality batteries.
- Storage: When not in use for extended periods, remove the batteries and store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Calibration: This device is factory calibrated. For professional use or if accuracy is suspected to be compromised, consult a qualified service technician for recalibration.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | Dead or incorrectly installed batteries. | Check battery polarity. Replace with new AAA batteries. |
| Inaccurate or fluctuating readings. | Obstructed air hole, sensor contamination, or extreme environmental conditions. | Ensure air hole is clear. Clean the device. Move to a stable environment. If problem persists, consider recalibration. |
| Alarm sounds continuously without high CO. | False alarm due to interference or sensor issue. | Move the device to a fresh air environment. If alarm continues, the sensor may be faulty. |
| Device shuts off unexpectedly. | Low battery or auto shut-off feature activated. | Replace batteries. Note that the device automatically turns off after 10 minutes of inactivity. |
9. Specifications
| Parameter | Value |
|---|---|
| Model Number | GM8805 |
| Main Color | Black |
| Detected Gas | CO in the air |
| Gas Type | CO |
| Measuring Range | 0-1000ppm |
| Resolution | 1ppm |
| Minimum Reading | 1ppm |
| Basic Error | +/-5%(f.s), +/-10ppm |
| Response Time | 60 seconds |
| Sensor Type | Electrochemical CO sensor |
| Operating Environment | 0-50 °C / 32-122 °F, 10-90%RH |
| Storage Environment | -10-80 °C / -14-176 °F, 10-75%RH |
| Power | 2 * 1.5V AAA battery (not included) |
| With LCD Screen | Yes |
| DIY Supplies | Electrical |
| Certification | CE |
| Weight | 104g / 3.67oz |
| Dimensions (L*W*H) | 135 * 55 * 29 mm / 5.3 * 2.16 * 1.14 in |
| Package Weight | 200g / 7.05oz |
| Package Size (L*W*H) | 17.5 * 12.2 * 5.3 cm / 6.9 * 4.8 * 2.1 in |
| Origin | Mainland China |

10. User Tips
- For best accuracy, allow the device to stabilize in the environment for a few minutes after powering on.
- When taking readings, hold the device steady and ensure the detecting air hole is not covered.
- Periodically test the alarm function in a safe manner (e.g., by exposing it to a very small, controlled source of CO if you have one, or by checking the self-test function if available in the full manual).
- Always keep a fresh set of spare batteries on hand.
11. Warranty and Support
11.1. Limited Warranty
This product comes with a 12-month manufacturer's limited warranty for defective items, starting from the date of receipt. This warranty does not cover items damaged due to misuse or unauthorized modifications after receipt. Accessories included with the product are covered by a 3-month warranty.
11.2. Warranty Claims
To make a warranty claim, defective items must be reported and returned within the specified warranty period. The item should be returned in its original packaging, if possible. You must provide details of the defect and your order number. Items with an expired warranty will not be repaired or replaced under warranty terms.
11.3. Customer Support
For any questions, technical assistance, or warranty inquiries, please contact the seller or manufacturer's customer support. Refer to your purchase documentation for specific contact information.