1. Product Overview
The ANNKE 4MP Wireless Surveillance System provides comprehensive security for your property with its advanced features and wire-free design. This system includes a Network Video Recorder (NVR) and solar-powered cameras, offering high-resolution video, intelligent detection, and flexible storage options.
Key Features
- 100% Wire-Free Installation: No complex wiring required, simplifying setup.
- 4MP (2560x1440) Resolution: Delivers clear and detailed video footage.
- Solar Power Supply: Cameras are equipped with built-in 5200mAh or 9000mAh rechargeable batteries and solar panels for continuous power.
- PIR Humanoid Detection: Advanced Passive Infrared (PIR) sensor detects human motion, reducing false alarms.
- Pan and Tilt Functionality: I81BM cameras offer 270° horizontal pan and 90° vertical tilt for wide area coverage. (Note: I81BL cameras do not support this function).
- Two-Way Audio: Built-in microphone and speaker allow for real-time communication.
- Night Vision: Supports both infrared night vision (up to 49ft) and full-color night vision (up to 26ft).
- Flexible Storage: Supports local Micro SD card (up to 128GB/256GB) and cloud storage options.
- Smart Home Integration: Compatible with Amazon Alexa for voice control.
- IP65 Weatherproof Rating: Cameras are dustproof and resistant to low-pressure water jets, suitable for outdoor use.
What's in the Box
The package typically includes the following components:

Image: Contents of the ANNKE Wireless Surveillance System box, showing NVR, cameras, solar panels, power adapter, USB mouse, HDMI cable, network cable, Type-C cable, wall sticker, screw bags, and user manual.
- NVR (Network Video Recorder)
- Cameras (4 or 8, depending on package)
- Solar Panels & Brackets (matching camera quantity)
- Power Adapter
- USB Mouse
- HDMI Cable
- Network Cable
- Type-C Cable
- Wall Sticker
- Screw Bags
- User Manual
2. System Setup
Camera Introduction (I81BM/I81BL)
Familiarize yourself with the camera components:

Image: Diagram of ANNKE camera showing WiFi Antenna, Microphone, 4mm HD Lens, White Light, PIR Sensor, TF Card Slot, and Speaker.
- WiFi Antenna: For wireless connectivity.
- Microphone: For audio input.
- 4mm HD Lens: Captures video footage.
- White Light: For full-color night vision and deterrence.
- PIR Sensor: Detects human motion.
- TF Card Slot: For local Micro SD card storage.
- Speaker: For two-way audio output and alarm siren.
NVR Introduction
Familiarize yourself with the NVR ports and indicators:

Image: Diagram of ANNKE NVR showing WiFi Antenna, VGA/HDMI Output, Mouse/USB Backup ports, Power Adapter input, Audio Output, and connection to a Router.
- WiFi Antenna: For wireless communication with cameras.
- VGA/HDMI Output: Connect to a monitor for video display.
- Mouse/USB Backup: USB ports for mouse control and data backup.
- Power Adapter: Input for NVR power supply.
- Audio Output: Connect to external speakers if needed.
- Network Interface: RJ45 port for connecting to a router.
Initial Setup Steps
- Unpack and Inspect: Carefully unpack all components and ensure everything listed in 'What's in the Box' is present and undamaged.
- NVR Connection:
- Connect the NVR to a monitor using an HDMI or VGA cable.
- Connect the USB mouse to a USB port on the NVR.
- Connect the NVR to your router using the provided network cable for internet access.
- Connect the power adapter to the NVR and plug it into a power outlet. The NVR will power on.
- Camera Charging & Placement:
- Before initial use, fully charge the camera batteries using the Type-C cable.
- Mount the solar panels in a location that receives ample direct sunlight throughout the day.
- Mount the cameras in desired surveillance areas, ensuring they are within range of the NVR's WiFi signal. The cameras are 100% wire-free for flexible placement.
- Camera Pairing (if not pre-paired):
- Follow the on-screen instructions on the monitor connected to the NVR to add and pair the cameras. Most systems come pre-paired.
- For I81BM cameras, ensure proper positioning to utilize the 270° pan and 90° tilt for full coverage.
- App Installation & Configuration:
- Download the ANNKE security app on your smartphone (Android/iOS).
- Register an account and add your NVR system by scanning the QR code on the NVR or manually entering its details.
- Configure settings such as motion detection zones, alert preferences (APP push, email, siren), and recording schedules through the app.
3. Operating Instructions
Live View and Playback
- Access Live View: Open the ANNKE app or connect a monitor to the NVR to view live feeds from all connected cameras.
- Pan & Tilt (I81BM only): Use the controls in the app to remotely adjust the camera's horizontal (270°) and vertical (90°) angles to cover desired areas.
- Smart Search & Playback: Utilize the app's smart search feature to quickly find specific events based on human detection. Playback recorded footage from local storage (Micro SD card/HDD) or cloud storage.

Image: Screenshot of ANNKE app showing smart search and playback timeline with human detection events.
Two-Way Audio
Engage in real-time conversations through the camera's built-in microphone and speaker.

Image: Two-way audio functionality, showing a person speaking into a phone and a delivery person hearing it through the camera.
- Tap the microphone icon in the app's live view to speak through the camera.
- Listen to audio from the camera's surroundings through the app.
Smart Human Detection & Alerts
The system uses PIR technology to accurately detect human motion and send instant alerts.

Image: Smart human detection triggering APP push notifications, email alerts, and a siren.
- When human motion is detected, you will receive instant push notifications on your phone, email alerts, and the camera can activate a siren.
- Customize detection zones to focus on specific areas and minimize false alarms.
Night Vision Modes
The cameras provide clear surveillance even in low-light conditions.

Image: Comparison showing 26ft 4MP Color Night Vision and 49ft 4MP IR Night Vision.
- Infrared (IR) Night Vision: Provides black and white video up to 49ft in complete darkness.
- Full-Color Night Vision: Activates white lights to provide color video up to 26ft in low-light conditions.
Storage Options
The system offers flexible storage solutions for your recordings.

Image: Local HDD storage (up to 8TB) and Micro SD card storage (up to 256GB), alongside cloud storage options.
- Local HDD Storage: The NVR supports up to 8TB HDD (2.5" & 3.5" inches) for continuous recording.
- Micro SD Card: Cameras support up to 128GB (I81BL) or 256GB (I81BM) Micro SD cards for edge recording.
- Cloud Storage: Optional cloud storage is available (subscription may be required) for off-site backup.
Video Demonstration
Video: A short demonstration of the ANNKE surveillance system's features, including instant alarm push, two-way audio, night vision, and coverage of multiple areas.
4. Maintenance
Solar Panel Care
- Regularly inspect and clean the solar panels to ensure they are free from dirt, dust, leaves, or snow. A clean panel ensures optimal energy conversion and continuous battery life.
- Ensure the solar panel is positioned to receive ample direct sunlight throughout the day.
Battery Management
- Monitor battery levels through the ANNKE app.
- In areas with prolonged low sunlight, consider periodically charging the camera batteries manually using the Type-C cable to ensure uninterrupted operation.
General Camera Maintenance
- Wipe the camera lens periodically with a soft, clean cloth to ensure clear image quality.
- Check for any physical damage to the camera housing or mounting brackets.
- Ensure the WiFi antennas are securely attached and oriented for optimal signal reception.
5. Troubleshooting
No Video/Offline Camera
- Check Power: Ensure the camera battery is charged and the solar panel is receiving sunlight.
- WiFi Signal: Verify the camera is within range of the NVR's WiFi signal. Relocate the camera or NVR if necessary.
- Re-pair Camera: If a camera goes offline, try re-pairing it with the NVR following the initial setup steps.
- NVR Connectivity: Ensure the NVR is powered on and connected to your network.
False Alarms/Missed Detections
- Adjust PIR Sensitivity: Lower the PIR sensitivity in the app settings to reduce false alarms from pets or moving branches.
- Customize Detection Zones: Define specific areas for motion detection to ignore irrelevant movements.
- Camera Placement: Ensure the camera is positioned correctly to capture human-sized objects and avoid direct sunlight or heat sources that might trigger false alarms.
Poor Image Quality
- Clean Lens: Wipe the camera lens clean of any dirt or smudges.
- Network Bandwidth: Ensure your network has sufficient bandwidth for streaming 4MP video.
- Lighting: Check if there's adequate lighting for night vision modes.
Two-Way Audio Issues
- Volume Settings: Check the volume settings on your phone and the camera's settings in the app.
- Microphone/Speaker Obstruction: Ensure the camera's microphone and speaker are not obstructed.
- Network Latency: High network latency can affect real-time audio. Check your internet connection.
6. Specifications
NVR Specifications
| Category | Feature | Specification |
|---|---|---|
| Video | Video Format | H.264+ |
| IP Video Input | 16CH Wireless | |
| Video Output | HDMI Up to 4K | |
| Audio Output | Support | |
| Max Recording Resolution | Up to 8M | |
| Max Playback Resolution | Up to 8M | |
| Max Playback Channel | 4CH | |
| Max Playback Capacity | 4CH 5MP/2CH 8MP | |
| Hard Drive | HDD Interface | 1 SATA interface |
| HDD Capacity | Up to 8TB capacity (2.5" & 3.5" inches) | |
| External Interface | Network Interface | RJ45x1 (10/100M) |
| Wireless Antenna | 3 Ports (2.4G & 5.8G dual-band, IEEE802.11b/g/n/ac) | |
| USB | USB2.0x2 | |
| General | Housing | Metal for main part |
| Operating Power | DC12V | |
| Power Consumption | 6 W (Without HDD) | |
| Working Temperature | 14°F ~ 131°F (-10°C ~ 55°C) | |
| Dimensions (W x H x D) | 260 x 245 x 47 mm | |
| Weight (Without Hard Disk) | 760 g |
Camera Specifications (I81BM - 9000mAh)
| Category | Feature | Specification |
|---|---|---|
| Camera | Video Resolution | 4MP (2560x1440) |
| Image Sensor | 1/3" Progressive Scan CMOS | |
| Video Compression | H.264+ | |
| Audio Compression | G.711A | |
| Lens | 4mm | |
| Angle of View | 70° | |
| Number of Infrared/Color LEDs | 6 | |
| Infrared and Full Color Distance | Infrared 15m / Color 8m | |
| PT (Pan/Tilt) | Horizontal 270°, Vertical 90° | |
| Built-in Battery | 3.7V/9000mAh (2pcs 21700) | |
| Audio Input/Output | Built-in microphone and speaker | |
| Min. Illumination | 0 Lux (with infrared LED on) | |
| Day Night Mode | Auto change with IR-CUT removable | |
| PIR Sensor Range | 10 meters | |
| Internet | Bluetooth Pairing | Support |
| Wireless Networks | 2.4G & 5.8G dual-band, IEEE 802.11.ax | |
| Wireless Security | WEP, WPA, WPA2 | |
| Remote Access | P2P | |
| General | Housing | Plastic |
| Operating Voltage | DC 5V | |
| Solar Power | Support | |
| Storage | Micro SD (Max 256GB) | |
| Operating Temperature | -20°C ~ 50°C (-4°F ~ 122°F) | |
| Indoor/Outdoor | Indoor/Outdoor | |
| Weatherproof Rating | IP65 |
Camera Specifications (I81BL - 5200mAh)
| Category | Feature | Specification |
|---|---|---|
| Model Number | I81BL | |
| Camera | Sensor | 1/3" CMOS |
| Focal Length | 4 mm | |
| Aperture | F2.0 | |
| Optical Field of View | 102.9° diagonal, 86.4° horizontal, 46.1° vertical | |
| Minimum Illumination | 0.1 lux | |
| IR Distance | Night visibility up to 15m, 10M Color Nightvision | |
| Audio | Input | Built-in microphone |
| Output | Built-in speaker | |
| Two-way Audio | Full duplex | |
| Audio Compressing | AAC | |
| Video | Video Compressing | H.264, H.265 |
| Lighting Frequency | 50 Hz, 60 Hz | |
| Frame Rate | 15 fps | |
| Maximum Resolution | 4MP 2560 × 1440 | |
| Light Source For Night Vision | White light or infrared LED switchable | |
| Network | Wireless Standard | 2.4 GHz Wi-Fi (IEEE 802.11 b/g/n) |
| Protocols Supported | TCP/IP, UDP/IP, DHCP, RTMP, MUTP | |
| IP Address Type | Dynamic IP address | |
| Recording | Recording Method | Alarm triggered recording, and manual recording |
| Video Storage | Cloud storage, local Micro SD card (up to 128 GB), and mobile phone memory | |
| Function | AI Function | Human detection |
| Wake-up Method | PIR body induction wake-up and remote wake-up | |
| Alarm Notification | Alarm push by mobile app, white LED flashing and alarm sound warning | |
| Indicator | RGB tri-color LED | |
| Battery | Capacity | 5200 mAh |
| Removability | Unremovable | |
| Charging Voltage | 5 V ±5% | |
| Charging Current | 1.5 A | |
| Protection | Over-charge, over-discharge, over-current, short circuit and charging protection at high and low temperature | |
| Power Consumption | Standby | 1.48 mW |
| Daytime Working | 0.95 W | |
| Nighttime Working | 1.54W | |
| Interface | Power | TYPE-C |
| Storage | Micro SD card | |
| Key | Power key and reset key | |
| Installation | Installation Method | Wall mount, ceiling mount, desktop |
| Bracket Type | 1/4'' universal screw hole | |
| Environment | Dustproof and Waterproof | IP65 |
| Operating Temperature | -10°C ~ 45°C | |
| Storage Temperature | -20°C ~ 60°C | |
| Product Dimension | Dimension | 54(L)mm x 118(W)mm x 81mm(H) (without bracket) |
| Bare Weight | 330 g | |
| Material | ABS + PC | |
| Color | White | |
Product Dimensions

Image: Dimensions of the ANNKE camera (14cm/5.51 inch width, 12.3cm/4.84 inch height) and NVR (25.5cm/10 inch width, 24cm/9.44 inch depth, 4.5cm/1.77 inch height).
7. User Tips
- Optimal Solar Charging: For best performance, ensure solar panels are installed in a location with maximum direct sunlight exposure and minimal shading. Regularly clean the panel surface.
- WiFi Range: While the system is wireless, ensure cameras are within a reasonable range of the NVR for stable connectivity, especially if using 5.8Ghz band which has shorter range.
- PIR Detection: Position cameras to avoid large objects or busy areas that might cause frequent false alarms. Adjust sensitivity as needed.
- Two-Way Audio Clarity: For clearer two-way audio, ensure there is minimal background noise at both ends.
8. Warranty and Support
ANNKE provides customer support for its products. For warranty information, technical assistance, or service inquiries, please refer to the official ANNKE website or contact their customer service directly. Keep your purchase receipt for warranty claims.