Introduction
Thank you for choosing the Dystler LED Lighted Display Cabinet. This manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Please read it thoroughly before beginning assembly and keep it for future reference.
The Dystler LED Lighted Display Cabinet showcasing its blue illumination.
Safety Information
- Always follow assembly instructions carefully.
- Do not exceed the maximum weight capacity for each shelf (Fixed shelves: 40 lbs, Adjustable shelves: 20 lbs).
- Secure the cabinet to a wall using anti-tip hardware (if included) to prevent accidental tipping, especially in homes with children or pets.
- Keep electrical components (LED lights, sensor) away from water and moisture.
- Ensure all connections for the LED lighting system are secure before use.
- Do not allow children to climb on or play with the cabinet.
Package Contents
Please check that all components are present and undamaged before beginning assembly. If any parts are missing or damaged, please contact customer support.
- Cabinet panels (top, bottom, sides, back)
- Shelves (fixed and adjustable)
- Doors with transparent acrylic panels
- Hinges and pneumatic gate mechanisms
- LED light strips and power supply
- Body sensor module
- Assembly hardware (screws, dowels, cam locks, etc.)
- Anti-tip hardware
- Instruction manual
Assembly Instructions
Assembly typically requires two people. Ensure you have a clear, spacious area to work. A Phillips head screwdriver and possibly a hammer may be required (not included).
- Prepare Components: Unpack all parts and lay them out. Identify each component using the provided parts list.
- Assemble Frame: Connect the side panels to the top and bottom panels using the provided hardware.
- Install Back Panel: Secure the back panel to the assembled frame.
- Install Shelves: Insert fixed shelves into their designated slots. For adjustable shelves, determine desired height and secure shelf supports before placing shelves. The height of internal shelves can be moved up or down by 2.5 inches to meet storage needs.
- Attach Doors: Mount the transparent acrylic doors using the hinges and pneumatic gate design. Ensure smooth and silent operation.
- Install LED Lighting and Sensor: Carefully attach the LED light strips to the interior of the cabinet. Connect the body sensor module and power supply according to the wiring diagram (refer to specific diagrams if provided in the package).
- Secure Cabinet: Attach the anti-tip hardware to the top of the cabinet and secure it to a wall stud.
Movable shelves allow for flexible storage configurations.
Details of the top storage area, transparent acrylic door, and pneumatic gate design.
Operating Instructions
LED Lighting
- Power On/Off: Locate the power button or switch for the LED lights.
- Change Color: Short press the designated button (usually on the light control panel) to cycle through the 3 available colors: warm white, blue, and cool white.
Smart Human Sensor
- The integrated body sensor will automatically trigger the lights when it detects human presence within a range of 2-3 meters.
- The lights will automatically turn off approximately 30 seconds after no motion is detected.
Illustration of 3 color lighting and smart human sensor functionality.
Maintenance
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the finish or acrylic panels.
- Dusting: Regularly dust the cabinet and shelves to maintain its appearance.
- Door Care: Ensure the pneumatic gate mechanism operates smoothly. Do not force the doors open or closed.
- Electrical Components: Keep the LED lights and sensor free from dust. Do not attempt to repair or modify the electrical components yourself.
Specifications
| Feature | Detail |
|---|---|
| Overall Dimensions (W x D x H) | 27.56" x 13.78" x 64.96" |
| Inner Width | 26.61" |
| Inner Depth | 13.3" |
| Top Storage Area Fence Height | 1.97" |
| Adjustable Shelf Height Range | Up or down 2.5" |
| Fixed Shelf Weight Capacity | 40 lbs (18.1 kg) |
| Adjustable Shelf Weight Capacity | 20 lbs (9.1 kg) |
| Product Weight | 68.3 lbs (31 kg) |
| Material | High-density board, Transparent acrylic |
| Lighting | 3-color LED (Warm White, Blue, Cool White) |
| Sensor Type | Smart Human Body Sensor (2-3m detection, 30s auto-off) |
Detailed product specifications including dimensions and weight capacities.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| LED lights do not turn on. | Power cable not connected; Power outlet not working; LED strip damaged. | Ensure power cable is securely plugged into the cabinet and a working outlet. Check if the power switch is on. If issues persist, contact support. |
| Sensor not detecting motion. | Sensor obstructed; Sensor range too far; Sensor malfunction. | Ensure the sensor is not blocked. Verify you are within the 2-3 meter detection range. Clean the sensor surface. |
| Doors are stiff or noisy. | Hinges or pneumatic mechanism needs adjustment/lubrication; Misalignment during assembly. | Check hinge alignment. Apply a small amount of silicone lubricant to the pneumatic mechanism if necessary. |
| Cabinet feels unstable. | Assembly hardware loose; Anti-tip kit not installed or improperly installed. | Tighten all assembly hardware. Ensure the anti-tip kit is correctly installed and anchored to a wall stud. |
User Tips
- Door Panel Clarity: Please note that the door panels are made of transparent acrylic, not smoked black glass. This design choice is intended to showcase your decor items clearly.
- Optimizing Sensor Performance: For best results with the smart human sensor, ensure it has a clear line of sight and is not obstructed by large objects.
- Adjustable Shelves: Utilize the adjustable shelves to customize storage space for items of varying heights, from tall books to decorative vases.
Warranty and Support
For any questions regarding assembly, operation, missing parts, or warranty claims, please contact Dystler customer support through your retailer or the official brand website. Please have your purchase details and product model information ready when contacting support.
