EARU EAMPS-1-V

Contents

EARU EAMPS-1-V Automatic Voltage Protector Socket Switch User Manual

Model: EAMPS-1-V | Brand: EARU

1. Introduction

The EARU EAMPS-1-V Automatic Voltage Protector Socket Switch is designed to safeguard your home appliances from damage caused by voltage fluctuations. It provides protection against both under-voltage and over-voltage conditions, featuring automatic recovery and a built-in time delay function to ensure stable power supply to connected devices. This device is suitable for a wide range of indoor electrical equipment, including air conditioners, water heaters, microwave ovens, washing machines, humidifiers, electric fans, and electric heaters.

Front view of the EARU EAMPS-1-V Voltage Protector, highlighting Under Voltage Protection, Over Voltage Protection, and Automatic Recovery.
Figure 1: Front view of the voltage protector, illustrating its core protective features.

2. Safety Information

  • This device is intended for indoor use only. Do not expose to water or excessive moisture.
  • Ensure the appliance connected to the protector does not exceed the maximum load current of 16A.
  • Do not disassemble or attempt to repair the device. Refer all servicing to qualified personnel.
  • The socket features a child-safe design to prevent accidental contact with live parts.
  • Made from PC flame-retardant material for enhanced safety.
Image showing the safety socket feature, designed to prevent children from accidentally inserting objects.
Figure 2: The safety socket design helps prevent accidental contact.

3. Specifications

Feature Specification
Brand Name EARU
Model Number EAMPS-1-V
Type Mini Voltage Protector Socket
Rated Voltage AC220-240V
Working Voltage AC220-240V
Frequency 50/60Hz
Rated Current 16A (MAX)
Under Voltage Protection 175±5V
Over Voltage Protection 260±5V
Delay Time 5-6 Minutes
Socket Type EU
Certification CE
Material PC Flame-Retardant
Dimensions (H x W x D) 136mm x 61mm x 86mm (approx. 5.35in x 2.4in x 3.39in)
Diagram showing the dimensions of the voltage protector and a table of product parameters.
Figure 3: Product dimensions and detailed specifications.

4. Setup

  1. Ensure the power outlet you intend to use is a standard EU type and is functioning correctly.
  2. Plug the EARU EAMPS-1-V Voltage Protector directly into the wall power outlet.
  3. Plug your home appliance into the socket of the voltage protector.
  4. Press the red 'On' button to activate the device.
Voltage protector connected to a water heater, demonstrating a typical setup.
Figure 4: Example setup with a high-power appliance.

5. Operating Instructions

The voltage protector operates automatically to monitor and regulate the power supply to your connected appliance. It features three indicator lights and an 'On' button:

  • Protect (Red LED): Illuminates when the input voltage is outside the safe operating range (either under-voltage or over-voltage). During this state, power to the appliance is cut off to prevent damage.
  • Recover (Yellow/Orange LED): Flashes during the 5-6 minute delay period after a voltage anomaly has been detected and the voltage returns to normal. This delay protects sensitive appliances from rapid power cycling.
  • Normal (Green LED): Illuminates when the input voltage is within the safe operating range and power is being supplied to the appliance.
  • On Button (Red Button): Used to manually turn the device on or off, or to reset it after a protection event.

When an over-voltage or under-voltage condition occurs, the device will instantaneously cut off the power supply. Once the voltage returns to a safe level, the device will initiate a 5-6 minute delay before restoring power to the appliance. This automatic recovery and delay mechanism ensures comprehensive protection.

Video 1: Demonstration of the voltage protector's LED indicators and operation.

6. Maintenance

  • Keep the device clean and dry. Use a soft, dry cloth to wipe the exterior.
  • Avoid using abrasive cleaners or solvents, as these can damage the casing.
  • Ensure proper ventilation around the device; do not cover it.

7. Troubleshooting

Problem: The 'Protect' (Red) LED is on, and the appliance is not receiving power.
Solution: This indicates an under-voltage or over-voltage condition. The device is functioning as intended by cutting off power. Wait for the voltage to stabilize. The device will automatically recover and restore power after the delay time.
Problem: The 'Recover' (Yellow/Orange) LED is flashing, and the appliance is not receiving power.
Solution: The voltage has returned to normal, and the device is currently in its 5-6 minute delay period. This is normal operation. Power will be restored to the appliance once the delay period is complete.
Problem: The device does not turn on, and no LEDs are illuminated.
Solution: Check the wall power outlet to ensure it has power. Ensure the device is securely plugged in. If the problem persists, try plugging the device into a different known-working outlet.
Problem: The appliance connected to the protector is not working, even when the 'Normal' (Green) LED is on.
Solution: Ensure the appliance itself is functioning correctly. Verify that the appliance's power consumption does not exceed the protector's maximum load current of 16A. If the appliance works when plugged directly into a wall outlet, contact customer support.

8. User Tips

  • For sensitive electronics like refrigerators or air conditioners, the 5-6 minute delay is crucial. Avoid unplugging the device during this recovery period.
  • Always ensure the total power draw of the connected appliance does not exceed 16A to prevent overloading.
  • If you experience frequent voltage fluctuations, consider consulting an electrician to assess your home's electrical system.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.