ALERVITES AT-888S

Contents

ALERVITES AT-888S Walkie Talkie User Manual

Model: AT-888S | Brand: ALERVITES

1. Introduction

Thank you for choosing the ALERVITES AT-888S Walkie Talkie. This compact and reliable two-way radio is designed for clear and efficient communication across various environments. Featuring a frequency range of 430-440MHz, it includes advanced functions such as VOX, power saving, LED light, alarm function, and encrypted calls. Please read this manual thoroughly before operating your device to ensure safe and optimal performance.

2. Safety Information

  • Do not operate the radio in explosive atmospheres (e.g., flammable gases, dust particles, metallic powders).
  • Do not expose the radio to direct sunlight for extended periods or place it near heating appliances.
  • Avoid using the radio if the antenna is damaged, as it may cause minor burns.
  • Keep the radio away from medical devices to prevent interference.
  • Use only ALERVITES approved batteries and chargers.
  • Do not disassemble or modify the radio.
  • Ensure the radio is turned off when refueling or near blasting caps.

3. Package Contents

Please check the package carefully to ensure all items are present:

Image showing the package contents of the ALERVITES AT-888S Walkie Talkie: Two radios, two antennas, two batteries, two belt clips, two chargers, and one user manual.
The package includes two AT-888S radios, two antennas, two rechargeable batteries, two belt clips, two USB chargers, and one user manual.
  • ALERVITES AT-888S Radio (x2)
  • Antenna (x2)
  • Rechargeable Battery (x2)
  • Belt Clip (x2)
  • USB Charger (x2)
  • User Manual (x1)

4. Product Overview

Familiarize yourself with the main components of your AT-888S walkie talkie:

Diagram of ALERVITES AT-888S Walkie Talkie components: Antenna, Flashlight, LED, Speaker, PTT, Monitor Key, Function Key, Channel Switch, Power Switch/Volume Control, SPK/MIC Jack.
This diagram illustrates the key components of the AT-888S walkie talkie, including the antenna, flashlight, LED indicator, speaker, Push-to-Talk (PTT) button, monitor key, function key, channel switch, power switch/volume control, and SPK/MIC jack.
  • Antenna: For transmitting and receiving signals.
  • Flashlight: Built-in LED light for illumination.
  • LED Indicator: Shows status (e.g., transmitting, receiving, low battery).
  • Speaker: Outputs received audio.
  • Microphone (MIC): For voice input.
  • PTT (Push-to-Talk) Button: Press and hold to transmit, release to receive.
  • Monitor Key: Used to listen to weak signals or check for activity on a channel.
  • Function Key: Activates various features (e.g., alarm, flashlight).
  • Channel Switch: Rotates to select desired communication channel.
  • Power Switch/Volume Control: Turns the radio on/off and adjusts volume.
  • SPK/MIC Jack: For connecting external speaker/microphone accessories.

5. Setup

5.1. Installing the Antenna

  1. Align the antenna with the connector on top of the radio.
  2. Turn the antenna clockwise until it is securely fastened. Do not overtighten.

5.2. Installing the Battery

  1. Ensure the radio is turned off.
  2. Align the battery pack with the battery compartment on the back of the radio.
  3. Slide the battery into place until it clicks securely.

5.3. Charging the Battery

The AT-888S uses a rechargeable battery and comes with a USB charger.

  1. Connect the USB charger cable to the charging port on the radio.
  2. Plug the USB charger into a compatible power source (e.g., USB wall adapter, computer USB port).
  3. The LED indicator will typically show red during charging and turn green when fully charged.
  4. Unplug the charger once charging is complete.
Icons illustrating battery protection features of ALERVITES AT-888S: Smart power saving, overcharge protection, over discharge protection.
The AT-888S incorporates smart power saving, overcharge protection, and over discharge protection to ensure battery longevity and safety.

5.4. Attaching the Belt Clip

  1. Align the belt clip with the screw holes on the back of the radio.
  2. Secure it with the provided screws.

6. Operating Instructions

6.1. Power On/Off and Volume Control

  • To turn on: Rotate the Power Switch/Volume Control knob clockwise until you hear a click.
  • To turn off: Rotate the Power Switch/Volume Control knob counter-clockwise until you hear a click.
  • To adjust volume: Rotate the same knob clockwise to increase volume, counter-clockwise to decrease.

6.2. Selecting a Channel

  • Rotate the Channel Switch knob to select your desired communication channel.
  • Ensure all radios in your group are set to the same channel for communication.

6.3. Transmitting and Receiving

  • To transmit: Press and hold the PTT (Push-to-Talk) button. Speak clearly into the microphone. The LED indicator will typically glow red.
  • To receive: Release the PTT button. The LED indicator will typically glow green when receiving a signal.

6.4. Monitor Function

  • Press and hold the Monitor Key to temporarily disable squelch and listen for weak signals or activity on the current channel.

6.5. Flashlight Function

  • The AT-888S features a built-in LED flashlight. Refer to the Function Key section for specific activation instructions, usually a short press or long press of the Function Key.
Image of ALERVITES AT-888S Walkie Talkie with its bright flashlight illuminated, providing convenience in dark environments.
The integrated bright flashlight provides additional convenience and utility, especially in low-light conditions.

6.6. Advanced Features

Icons representing key features of the ALERVITES AT-888S Walkie Talkie: VOX, Power Saving, LED Light, Clear Sound, Alarm Function, Encryption.
This image highlights the main features of the walkie talkie, such as Voice Operated Transmit (VOX), intelligent power saving, built-in LED light, clear sound transmission, alarm function, and encrypted calls for privacy.
  • VOX (Voice Operated Transmit): Allows hands-free operation. The radio transmits automatically when it detects your voice. Consult the full PDF manual for activation and sensitivity settings.
  • Power Saving: The radio automatically enters power-saving mode when no activity is detected, extending battery life.
  • Alarm Function: Can be activated via the Function Key for emergency signaling.
  • Encrypted Calls: Provides enhanced privacy for your communications. Specific setup details are in the comprehensive manual.

7. Maintenance

  • Cleaning: Wipe the radio with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
  • Battery Care: To maximize battery life, avoid overcharging and completely discharging the battery. The AT-888S includes built-in overcharge and over-discharge protection.
  • Storage: Store the radio in a cool, dry place when not in use. Remove the battery if storing for extended periods.
  • Antenna: Ensure the antenna is always securely attached.

8. Troubleshooting

Problem Possible Cause Solution
No power Battery depleted or not installed correctly. Charge the battery. Reinstall the battery.
Cannot transmit or receive Incorrect channel, out of range, or antenna loose. Verify channel. Move closer to other radios. Check antenna connection.
Poor sound quality Low battery, interference, or too far apart. Charge battery. Move away from interference sources. Reduce distance.
Flashlight not working Battery low or function not activated correctly. Charge battery. Refer to operating instructions for flashlight activation.

9. Specifications

Feature Specification
Brand Name ALERVITES
Model Number AT-888S
Frequency Range 430 - 440 MHz
Output Power 3w-5w
Maximum Range 1.5km-3km
Battery Capacity 1500 mAh
Battery Included Yes (Rechargeable)
Waterproof / Water-Resistant No
Display No
Walkie Talkie Type Portable
High-concerned chemical None
Image showing the ALERVITES AT-888S Walkie Talkie with a high gain antenna, indicating improved coverage and increased reception range.
Equipped with a high gain antenna, the AT-888S offers enhanced coverage and an extended reception range for reliable communication.

10. User Tips

  • For optimal performance, ensure batteries are fully charged before extended use.
  • Always check that all radios in your group are on the same channel for seamless communication.
  • The AT-888S is noted for its clear sound and reliable operation, making it an excellent device for various uses.

11. Warranty and Support

For detailed warranty information and technical support, please refer to the official product documentation or contact your seller. A comprehensive user manual in PDF format may be available for download from the seller's website or via the following link: ALERVITES AT-888S User Manual (PDF).

© 2024 ALERVITES. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.