ZoeRax WXQ-CSY-A

Contents

ZOERAX RJ45 RJ12 RJ11 Network Crimp Tool User Manual

Model: WXQ-CSY-A / WXQ-CSY-B

Multi-function tool for network cable crimping, stripping, cutting, and testing.

1. Safety Information

  • Electric Shock Hazard: Do not use this tool on live electrical circuits or wires to prevent electric shock.
  • Sharp Edges: The blades and crimping parts are sharp. Exercise caution and avoid direct contact.
  • Operation Safety: Keep fingers clear of the blades and crimping dies during operation to prevent injury.

2. Product Overview

The ZOERAX Network Crimp Tool is a versatile device designed for efficient network cable preparation and termination. It integrates crimping, stripping, cutting, and cable testing functions into a single, durable unit.

ZOERAX RJ45 RJ12 RJ11 Network Crimp Tool
Figure 2.1: ZOERAX Multi-function Network Crimp Tool

Key Features:

  • Multi-Standard Crimping: Supports 8P (RJ45), 6P (RJ12), and 4P (RJ11) crystal head crimping.
  • Integrated Cable Tester: Detachable, high-precision tester for network cable conductivity, open circuit, short circuit, and disconnection. (Requires LR44 batteries, not included).
  • Wire Preparation: Includes a wire stripping blade and a sharp wire cutting blade.
  • Labor-Saving Design: Features a rebound ratchet mechanism for easier and more durable crimping.
  • Durable Construction: Made from preferred high carbon steel with one-piece molding.
  • Ergonomic Handle: Anti-slip handle for a comfortable and secure grip.
  • High-Quality Blades: Sharp, wear-resistant, and replaceable blades for consistent performance.
Product structure diagram showing parts like crimping heads (8P, 6P, 4P), wire stripping blade, cutting blade, ratchet device, anti-slip handle, high-precision tester, and test indicator.
Figure 2.2: Product Structure and Components

3. Setup

Before using the tool, perform the following checks:

  1. Inspect for Damage: Carefully inspect the product for any physical damage upon receipt.
  2. Compatibility: Ensure the tool is compatible with the type of network connectors (RJ45, RJ12, RJ11) and cables you intend to use.
  3. Battery Installation (for Tester): The integrated cable tester requires LR44 batteries. Open the battery compartment on the tester unit and insert the batteries with correct polarity.

4. Operating Instructions

4.1. Cable Preparation (Stripping & Cutting)

Illustration of stripping, cutting, and crimping a cable using the tool.
Figure 4.1: Cable Preparation Steps
  1. Stripping: Place the cable into the hemispherical stripping port. Gently squeeze the handles and rotate the tool around the cable to strip off the outer sheath without damaging the inner wires.
  2. Cutting: Use the sharp wire cutting blade to trim the cable to the desired length. Ensure a clean, straight cut.

4.2. Crimping Network Connectors

Step-by-step crimping instructions with six visual steps: 1. Insert cable, strip outer sheath. 2. Confirm 568A/B, sort wires, trim. 3. Level wires, cut with pliers. 4. Insert trimmed cable into crystal head. 5. Insert cable into pliers, crimp. 6. Connect to tester.
Figure 4.2: Detailed Crimping Steps
  1. Strip Cable: Insert the cable into the stripping port and strip off the outer sheath (approx. 15mm).
  2. Arrange Wires: Confirm the 568A/B wiring standard. Untwist and sort the individual wires according to the chosen standard. Trim the wires to a suitable length (5mm is recommended).
  3. Level Wires: After arranging, use the cable pliers to level and trim the wires evenly.
  4. Insert into Connector: Carefully insert the trimmed and arranged wires into the crystal head (RJ45/RJ12/RJ11 connector), ensuring each wire reaches the end of its channel.
  5. Crimp: Place the crystal head with the inserted wires into the corresponding crimping die (8P, 6P, or 4P) on the tool. Squeeze the handles firmly until the ratchet mechanism releases, indicating a complete crimp.

4.3. Using the Cable Tester

Close-up of the embedded detachable cable tester in use, showing the test indicators.
Figure 4.3: Detachable Cable Tester in Use
  1. Detach Tester: The cable tester is embedded in the handles. Gently slide and detach the two halves of the tester from the crimp tool.
  2. Connect Cable: Plug one end of the crimped network cable into the 'MASTER' port of one tester half and the other end into the 'REMOTE' port of the other tester half.
  3. Perform Test: Turn on the tester. The LED indicators will light up sequentially, showing the continuity of each wire pair.
  4. Interpret Results:
    • Sequential Lights: Indicates correct wiring and continuity.
    • Missing Lights: Suggests an open circuit or broken wire.
    • Incorrect Sequence/Multiple Lights: Indicates a short circuit or misconnection.

5. Maintenance

  • Cleaning: Regularly clean the tool, especially the crimping dies and blades, to remove any wire debris or dust. Use a dry cloth.
  • Blade Replacement: The tool features high-quality, replaceable blades. If the cutting or stripping performance degrades, consider replacing the blades. Refer to the official ZoeRax website or contact support for replacement parts.
  • Storage: Store the tool in a dry, clean environment when not in use to prevent rust and damage.
  • General Care: Ensure the ratchet mechanism operates smoothly. Apply a small amount of lubricant if necessary.

6. Troubleshooting

Problem: Tool not functioning as expected (e.g., crimping issues).
Solution: Verify that the correct crimping die is selected for your connector type (8P, 6P, or 4P). Ensure the cable and connector are properly seated before crimping. Check for any obstructions in the crimping mechanism.
Problem: Unstable network connection after crimping (detected by tester).
Solution: This often indicates an issue with the cable or connector. Try restarting your network router and connected devices. If the problem persists, re-crimp the cable, ensuring all wires are correctly arranged (568A/B standard) and fully inserted into the connector before crimping. Use the cable tester to verify the new crimp.
Problem: Cable tester not turning on or showing dim lights.
Solution: Check if the LR44 batteries are correctly installed and have sufficient charge. Replace batteries if necessary. Note that the tester's LED indicators might appear dim in brightly lit environments.
Problem: Abnormal functionality or persistent issues.
Solution: If you encounter any abnormal functionality not covered here, please contact ZoeRax customer support for assistance.

7. Specifications

Product parameters diagram with dimensions (200mm length, 45mm width) and material (high carbon steel).
Figure 7.1: Product Dimensions
Parameter Detail
Product Name Multi-function Network Pliers
Brand ZoeRax
Model Number WXQ-CSY-A / WXQ-CSY-B
Type Cable Crimper
Crimping Type 8P (RJ45), 6P (RJ12), 4P (RJ11)
Material High Carbon Steel
Functions Crimping, Stripping, Cutting, Cable Testing (Network/Telephone/Microphone Cable)
Scope of Use Integrated wiring, Home wiring, Engineering wiring
Dimensions (Approx.) Length: 200mm (7.87 inches), Width: 45mm (1.77 inches)
Package Dimensions 27 cm (L) x 17 cm (W) x 5 cm (H)
Weight 0.419 kg (0.92 lbs)
Battery for Tester LR44 (Not Included)
Package Included Yes

8. User Tips

  • Tester LED Brightness: Be aware that the tester's LED indicators might appear dim in very bright environments. Consider testing in a moderately lit area for clearer visibility.
  • Battery Type: The integrated cable tester requires LR44 batteries. Ensure you have these on hand as they are typically not included with the tool.
  • Wire Arrangement: Always double-check your wire arrangement (568A or 568B) before inserting into the connector and crimping to avoid errors.

9. Warranty and Support

For warranty information, detailed support, or to purchase replacement parts (such as blades), please refer to the official ZoeRax documentation or contact their customer service directly.

If you experience abnormal functionality or require further assistance, please reach out to ZoeRax customer support.

A digital version of the user manual (PDF) may be available for download. Please check the product page or the manufacturer's website for the latest version: View User Manual (PDF)

© 2023 ZoeRax. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.