1. Introduction
Thank you for choosing the UGREEN ClipBuds Pro Open Ear Wireless Headphones. These innovative headphones are designed to provide a comfortable, immersive audio experience with advanced features such as Adaptive Dual-Feedback Active Noise Cancellation, 360° Dynamic Spatial Audio, and a secure, ultra-light ear-clip design. This manual will guide you through the setup, operation, and maintenance of your new headphones.
2. Package Contents
Please check the package for the following items:
- UGREEN ClipBuds Pro Earbuds (Left and Right)
- Charging Case
- USB-C Charging Cable
- User Manual (this document)

3. Product Features
- Adaptive Dual-Feedback Active Noise Cancellation (ANC): Reduces sound leakage by 99% for 100% music immersion, utilizing a Triple Adaptive Algorithm and Dynamic Audio Compensation.
- Ultra-Light Ear-Clips: Each earbud weighs only 6.1g, featuring an ergonomic design for a perfect and comfortable fit, tested for over 100,000 expansions.
- 11mm Dual-Magnet Drivers: Equipped with Composite Bio-Diaphragm for Hi-Fi sound quality, deep bass, and rich detail.
- 360° Dynamic Spatial Audio: Delivers a theater-level audio experience.
- 3-Mic AI Noise Cancellation: Actively analyzes ambient noise and intelligently separates background sounds from human voices for clear calls.
- Extended Playtime: Up to 7.5 hours of music playback on a single charge for earbuds, and up to 32 hours total with the charging case. Supports flash charging.
- Bluetooth 6.0: Ensures lower latency, faster connection speeds, and more stable connectivity performance.
- IPX5 Nano-Level Waterproofing: Earbuds are built to withstand sweat, rain, and are safe to rinse under running water.
- UGREEN Home App: Provides personalized control, including battery monitoring, gaming mode, 'Find My Earbuds' function, EQ sound profiles, noise cancellation modes, and dual-device connectivity.
- Dual Device Connection: Connects to two devices simultaneously with easy switching between them.










4. Setup and Wearing Guide
4.1 Initial Setup
- Charge the Earbuds: Place both earbuds into the charging case. Connect the charging case to a USB power source using the provided USB-C cable. The indicator light on the case will show charging status.
- Pairing: Open the charging case. The earbuds will automatically enter pairing mode. On your device (smartphone, tablet, etc.), enable Bluetooth and select "UGREEN ClipBuds Pro" from the list of available devices.
4.2 Wearing the Earbuds
For optimal sound quality and comfort, ensure the earbuds are worn correctly.
- Pick up either earbud and locate the sound outlet.
- Align the sound outlet with your ear canal, gently clip it onto your ear, and adjust until stable.
Note: Avoid positioning the soft ear clip too high or too low on your ear to ensure a secure and comfortable fit.

5. Operating Instructions
5.1 Touch Controls
The UGREEN ClipBuds Pro feature intuitive touch controls on each earbud:
- Press & Hold (Left/Right Earbud for 1s): Switch noise cancellation modes (ANC On/Off/Transparency).
- Press & Hold (Right Earbud for 1s): Reject an incoming call.
- Triple-Tap (Left Earbud): Activate voice assistant.
- Triple-Tap (Right Earbud): Enter game mode.
- Double-Tap (Left/Right Earbud): Play/pause music, answer/end call.
Note: For more customizable controls and advanced settings, please download the UGREEN App from your device's app store.

6. Maintenance and Care
- Cleaning: The earbuds are IPX5 waterproof, meaning they can resist sweat and rain and can be rinsed under running water. However, do not submerge them. Use a soft, dry cloth to wipe the charging case.
- Storage: Always store the earbuds in their charging case when not in use to protect them and keep them charged.
- Charging Contacts: Periodically clean the charging contacts on both the earbuds and the charging case with a dry cotton swab to ensure proper charging.
- Avoid Extreme Conditions: Do not expose the earbuds or charging case to extreme temperatures, humidity, or corrosive liquids.
7. Troubleshooting
7.1 Pairing Issues
- Earbuds not pairing with device: Ensure Bluetooth is enabled on your device and the earbuds are in pairing mode (open the charging case). Try turning Bluetooth off and on again on your device.
- Only one earbud connecting: Place both earbuds back into the charging case, close the lid, wait a few seconds, then open it again. This often resets the connection.
7.2 Sound Quality Issues
- Low volume or poor sound: Ensure the earbuds are properly seated in your ears according to the wearing guide. Check the volume levels on both your device and the earbuds.
- Intermittent audio: Move closer to your connected device to avoid interference. Ensure there are no major obstructions between the earbuds and your device.
7.3 Charging Issues
- Earbuds not charging: Ensure the charging contacts on both the earbuds and the case are clean and dry. Check that the USB-C cable is securely connected to both the case and the power source.
- Charging case not charging: Try a different USB-C cable or power adapter.
If you encounter persistent issues, refer to the UGREEN Home App for additional diagnostic tools or contact UGREEN customer support.
8. Specifications
| Feature | Specification |
|---|---|
| Product Name | UGREEN ClipBuds Pro |
| Model | WS218 |
| Wireless Frequency Range | 2400MHz - 2483.5MHz |
| Maximum RF Power | 4dBm |
| Transmission Distance | Up to 10 meters (max, unobstructed) |
| Bluetooth Protocols | HFP / AVRCP / A2DP / BLE / SPP |
| Audio Codecs Supported | AAC / SBC / LDAC |
| Frequency Response Range | 20Hz - 40kHz |
| Charging Port (Case) | USB-C |
| Battery Type | Lithium polymer battery |
| Earbuds Battery Capacity | 45mAh, 3.7V (0.167Wh) |
| Charging Case Battery Capacity | 500mAh, 3.7V (1.85Wh) |
| Charging Case Input | 5V ≈ 500mA |
| Charging Case Output | 5V ≈ 200mA |
| Earbud Charging Time | Approx. 1.5 hours |
| Charging Case Charging Time | Approx. 2 hours |
| Charging Voltage Limit | 5.25V |
| Battery Life | Up to 7.5 hours (earbuds only), Up to 32 hours total with charging case* |
| Earbud Weight | 6.1g per earbud |
| Charging Case Dimensions | 72mm x 50mm |
| Earbud Dimensions | 32mm x 22mm x 27mm |
*Battery life data is based on tests conducted by UGREEN Lab in music mode using the AAC codec at 60% volume.

9. User Tips
- Optimal Call Quality: For the best phone call experience, especially in noisy or windy environments, ensure the 3-Mic AI Noise Cancellation feature is active. This helps isolate your voice from background sounds.
- Personalized Audio: Download the UGREEN Home App to customize EQ settings, switch noise cancellation modes, and access other personalized controls to tailor your listening experience.
- Secure Fit: Experiment with the earbud placement to find the most secure and comfortable fit for your ear shape. A proper fit enhances both sound quality and the effectiveness of ANC.
- Battery Management: Regularly check the battery status via the UGREEN Home App or your device's Bluetooth settings to avoid unexpected power loss during use.
10. Warranty and Support
UGREEN products are designed and manufactured to the highest quality standards. This product is covered by a limited warranty from the date of purchase. For detailed warranty information, please refer to the official UGREEN website or contact your local distributor.
If you encounter any issues or have questions regarding your UGREEN ClipBuds Pro, please contact UGREEN customer support through their official website or the UGREEN Home App. Please have your product model (WS218) and purchase information ready when contacting support.