1. Introduction
Thank you for purchasing the Wireless Controller P05. This transparent controller features a touchpad, six-axis gyroscope, programmable buttons, and vibrant LED lighting, offering an immersive gaming experience across multiple platforms. This manual provides detailed instructions on how to set up, operate, and maintain your controller.
Figure 1: Wireless Controller P05
2. Product Features
- Multi-Platform Compatibility: Supports PS4, PS3, PC, Nintendo Switch, Android, and iOS (MFI) devices.
- Six-Axis Gyroscope: Provides high-precision motion sensing for accurate in-game control, especially in FPS and racing games.
- Asymmetric Vibration Motors: Built into the grips for immersive haptic feedback tailored to game scenarios.
- Programmable Back Keys (M1/M2): Customize up to 12 action moves for enhanced efficiency and macro functions.
- Touchpad: Offers novel gameplay and interaction modes, supporting drag & drop, sliding touch, and multi-point input.
- LED Colorful Breathing Lamp: Adjustable lighting effects for a personalized gaming atmosphere.
- Turbo Function: Allows for continuous firing with adjustable speeds.
- 3.5mm Earphone Jack: For direct audio connection and immersive sound.
- Connectivity: Bluetooth, Wired (Type C), and 2.4G connection options.
- Linear Pressure Triggers: Designed for a responsive and realistic feel.
Figure 2: Multi-platform compatibility
3. Setup
3.1 Charging the Controller
Before first use, ensure the controller is fully charged. Connect the controller to a 5V/500mA power source using a Type C cable. The LED indicator will show charging status and turn off when fully charged. A full charge provides over 10 hours of playtime and up to 30 days of standby time.
3.2 Connecting to Devices
The P05 controller supports Bluetooth, wired (Type C), and 2.4G connections. The specific connection method may vary slightly depending on your device.
- Bluetooth Connection:
- Ensure the controller is powered off.
- Press and hold the Home button (5) until the LED indicator starts flashing, indicating pairing mode.
- On your device (PS4, Switch, Android, iOS, PC with Bluetooth), search for Bluetooth devices and select "P05 Controller" or similar.
- Once connected, the LED indicator will stabilize.
- Wired Connection (Type C):
- Connect the controller to your PC or console using a Type C USB cable.
- The controller should be automatically recognized by your device.
- 2.4G Connection: (Requires a 2.4G receiver, not explicitly mentioned as included, but feature is listed)
- Plug the 2.4G receiver into your device's USB port.
- Power on the controller. It should automatically connect to the receiver.
Figure 3: Connectivity options
4. Operating Instructions
4.1 Button Layout and Functions
Figure 4: Function Key Description
| No. | Key Name | Function |
|---|---|---|
| 1 | Cross Key (D-pad) | Directional input |
| 2 | Left Rocker | Analog movement input |
| 3 | SHARE Key | Share content (platform dependent) |
| 4 | Touch Pad | Touch input, drag & drop, sliding, multi-point input |
| 5 | Home Key | System menu, power on/off, pairing |
| 6 | MOT+ (Vibration Adjustment) | Adjust motor vibration intensity |
| 7 | LED (Light Adjustment) | Cycle through LED lighting effects (dazzling, stop dazzling, off) |
| 8 | Right Rocker | Analog movement input |
| 9 | OPTIONS Key | Game options/menu (platform dependent) |
| 10 | X Key | Action button |
| 11 | A Key | Action button |
| 12 | Y Key | Action button |
| 13 | B Key | Action button |
| 14 | L1 Key | Left shoulder button |
| 15 | R1 Key | Right shoulder button |
| 16 | R2 Key | Right trigger button (linear pressure) |
| 17 | L2 Key | Left trigger button (linear pressure) |
| 18 | M1 Key | Programmable back key |
| 19 | M2 Key | Programmable back key |
4.2 Turbo Function Settings
The controller features a turbo function for continuous input on specific keys. Follow these steps to set it up:
Figure 5: Turbo Function Instructions
- Press the MOT+ function key (6) once to activate continuous sending for the 'A' key.
- Press the MOT+ function key (6) a second time to make the 'A' key automatically send continuously.
- Press the MOT+ function key (6) a third time to deactivate continuous transmission for the 'A' key, returning it to its original state.
- To set the speed of automatic continuous firing: Press and hold the MOT+ key (6) and the Left Rocker (2) simultaneously. You can cycle through speeds of 15 times/second, 25 times/second, and 8 times/second.
- Note: The setting method for other function keys is the same as described above.
4.3 Programmable Back Keys (M1/M2)
The M1 (18) and M2 (19) keys on the back of the controller are programmable, allowing you to customize up to 12 action moves for macro functions and improved operational efficiency.
Figure 6: Programmable Back Keys
Specific programming instructions are typically found in the device's software or a dedicated companion app, if available. Refer to the manufacturer's website or support for detailed programming guides.
4.4 LED Lighting Adjustment
Use the LED adjustment button (7) to cycle through different lighting effects:
- Dazzling light effect
- Stop dazzling (static light)
- Turn off the light effect
Figure 7: LED Lighting Options
4.5 Using the 3.5mm Earphone Hole
Plug your 3.5mm headphones into the jack at the bottom of the controller (Figure 8) to enjoy in-game audio directly, eliminate external noise, and enhance your immersion.
Figure 8: 3.5mm Earphone Hole
5. Maintenance
- Cleaning: Use a soft, dry cloth to clean the controller. Avoid using harsh chemicals or abrasive materials.
- Storage: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the controller frequently. Charge it regularly, even if not in use for extended periods.
- Avoid Drops: Protect the controller from drops and impacts, which can damage internal components.
6. Troubleshooting
- Controller not connecting:
- Ensure the controller is charged.
- Verify Bluetooth is enabled on your device and the controller is in pairing mode.
- Try restarting both the controller and your device.
- For wired connection, ensure the cable is securely connected and try a different USB port.
- Buttons not responding:
- Check if the controller is properly connected to your device.
- Restart the controller.
- Ensure no debris is lodged under the buttons.
- Vibration not working:
- Check in-game settings to ensure vibration is enabled.
- Adjust the vibration intensity using the MOT+ button (6).
- LED lights not working:
- Press the LED adjustment button (7) to cycle through lighting modes.
- Ensure the controller has sufficient battery charge.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | P05 |
| Type | Gamepads |
| Interface Type | Bluetooth, Type C, 2.4G |
| Compatible Platforms | Nintendo Switch, PC, Android, iOS (MFI), PlayStation 4, PlayStation 3 |
| Battery Included | Yes |
| Trigger Button Type | Non-Linear (Linear Pressure Triggers) |
| Working Voltage | DC 3.7V |
| Working Current | < 35mA |
| Duration | > 10 hours |
| Sleep Current | < 35uA |
| Charging Voltage / Current | DC 5V / 500mA |
| Bluetooth Transmission Distance | <= 8 meters |
| Standby Time (Full Power) | 30 days |
| Certifications | CE, RoHS |
| Package Dimensions (L x W x H) | 20 cm x 14 cm x 10 cm |
| Package Weight | 0.401 kg |
Figure 9: Product Parameters
8. User Tips
- PS5 Compatibility: While the controller is compatible with PS4 and PS3, its compatibility with PS5 is not officially listed. Users interested in PS5 compatibility should verify with the seller or consult specific PS5 accessory guidelines.
- MFI Mode for iOS: For Apple MFI mode games, ensure you search and download game resources from the App Store. Games in Shan Wan MFI are supported.
- PC Gaming: The controller supports popular PC gaming platforms like Steam and Epic Games.
Figure 10: Apple MFI Mode Game Support
Figure 11: PC Game Compatibility
9. Warranty and Support
For any issues, questions, or support regarding your Wireless Controller P05, please contact the seller or the manufacturer directly. Keep your purchase receipt as proof of purchase for any warranty claims.
