1. Introduction
The LILYGO T5-4.7-S3 Pro Epaper Development Board is a versatile and low-power device featuring an ESP32-S3 microcontroller, a 4.7-inch e-paper touch screen, and integrated LoRa and GPS capabilities (depending on the model). This manual provides essential information for setting up, operating, and maintaining your development board.
2. Product Variants
The LILYGO T5-4.7-S3 Pro Epaper Development Board is available in several configurations:
- Type 1 (H752-01): 868MHz LoRa with GPS
- Type 2 (H752-02): 915MHz LoRa with GPS
- Type 3 (H752-A): 868MHz LoRa without GPS
- Type 4 (H752-04): 433MHz LoRa with GPS
3. Specifications
| Feature | Detail |
|---|---|
| MCU | ESP32-S3-WROOM-1 |
| Flash | 16MB |
| PSRAM | 8MB |
| Wireless Protocol | 2.4 GHz Wi-Fi & BLE 5 |
| Programming Environment | Arduino-IDE, VS Code |
| Board Functions | Capacitive touch, RTC PCF8563, TF card (Micro SD card) support |
| Battery Management Chips | BQ25896, BQ27220 |
| LoRa Transceiver | SX1262 Low Power LoRa Transceiver |
| Supported LoRa Frequencies | 433MHz, 868MHz, 915MHz |
| E-paper Screen | 4.7-inch ultra-low power electronic ink screen |
| E-paper Driver IC | ED047TC1 |
| Grayscale Level | 16 |
| Resolution | 540 x 960 |
| Charging | Supports MagSafe charging |
| Touch Screen | 2.5D curved design + 2-point capacitive touch screen |
4. Package Contents
The standard package includes:
- 1 x LILYGO T5-4.7-S3 Pro Epaper Development Board
- 2 x Screws
5. Hardware Overview
Familiarize yourself with the physical components of the T5-4.7-S3 Pro board:
- 4.7-inch E-paper Display: Front-facing, touch-sensitive screen.
- USB Type-C Port: For power and data connection.
- PWR Button: Power on/off.
- RST Button: Reset the device.
- BOOT Button: For entering bootloader mode during programming.
- TF Card Slot: For Micro SD card expansion.
- MagSafe Charging Area: On the back for wireless charging.
- LILYGO T5-EPAPER Module: Integrated on the back, indicating ESP32-S3 and LoRa.
- M4 Screw Holes: For mounting.
6. Setup
- Unpack: Carefully remove the development board and accessories from the packaging.
- Initial Power: Connect the board to a computer or a 5V USB power adapter using a USB Type-C cable. The board should power on automatically or can be turned on using the PWR button.
- TF Card (Optional): If your application requires external storage, insert a Micro SD card into the TF card slot.
- Programming Environment Setup: For development, install the Arduino IDE or VS Code with PlatformIO. Refer to the official LILYGO GitHub repository for specific board support packages and examples: https://github.com/Xinyuan-LilyGO/LilyGo-EPD47/tree/esp32s3
7. Operating Instructions
The T5-4.7-S3 Pro features a touch-sensitive e-paper display for interaction. The default firmware typically presents a menu with various functions:
- Screen Interaction: Use the capacitive touch screen to navigate menus and select options.
- Main Menu Icons: Common icons include WiFi, Clock, LoRa, Battery status, Shutdown, SD Card access, Settings, and Test functions. Tap on an icon to activate its corresponding feature.
- Power Management: Use the PWR button to turn the device on or off.
- Reset: The RST button can be used to perform a hardware reset if the device becomes unresponsive.
8. Programming Environment
The LILYGO T5-4.7-S3 Pro is designed for development and supports popular platforms:
- Arduino IDE: A widely used environment for ESP32 development.
- VS Code with PlatformIO: Offers a more advanced and feature-rich development experience.
For detailed programming guides, libraries, and example code, please visit the official LILYGO GitHub repository:
9. User Tips
- Screen Protection: The e-paper screen is soft. Small air bubbles at the corners during initial fitting are normal and generally unavoidable.
- Color Tint: This version of the e-paper screen may exhibit a slight yellowish color cast. This is a characteristic of the display technology and not a defect.
- Ghosting: E-paper displays can show ghosting (residual images) with long-term partial refreshes. A full screen refresh can typically clear this.
10. Troubleshooting
- Device not powering on: Ensure the USB Type-C cable is securely connected and providing power. Check the power source.
- Screen issues (air bubbles, yellowish tint, ghosting): Refer to the 'User Tips' section. These are often normal characteristics of the e-paper technology. For ghosting, try a full screen refresh in your code.
- Programming upload failure: Ensure correct board selection in your IDE, proper drivers are installed, and the board is in bootloader mode if required (usually by holding BOOT while connecting USB or pressing RST).
- Wi-Fi/BLE/LoRa connectivity issues: Verify your code for correct configuration, antenna connection (if external), and ensure you are within range of networks/devices.
- GPS not acquiring signal: Ensure the device has a clear view of the sky and is not indoors. Check GPS library initialization in your code.
11. Maintenance
- Cleaning: Use a soft, dry cloth to clean the screen and board. Avoid abrasive materials or harsh chemicals.
- Storage: Store the board in a cool, dry place away from direct sunlight and extreme temperatures.
- Firmware Updates: Regularly check the official LILYGO GitHub repository for firmware updates and improvements.
- Battery Care: If using a battery, avoid deep discharge and overcharging to prolong its lifespan.
12. Warranty and Support
For warranty information and technical support, please refer to the official LILYGO website or contact the vendor from whom you purchased the product. The LILYGO GitHub repository also serves as a valuable resource for community support and documentation.