1. Introduction
Thank you for choosing the FDIK-V Series 2KW Diesel Parking Heater. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new heater. The FDIK-V Series is designed to provide fast, energy-efficient heating for various applications, including cars, yachts, boats, trailers, RVs, cabins, and even small households.



2. Package Contents
Please check the package contents against the list below. If any items are missing or damaged, contact customer support.

- Heater Unit (2KW)
- Controller (LCD Switch) x 1
- Remote Controller x 1
- Tubing x 1
- Exhaust Pipe x 1
- Fuel Tank (5.0L) x 1
- Oil Filter x 1
- 60mm Wind Head x 1
- Air Filter x 1
- Oil Pump x 1
- Buckle x 4
- Wire Harness x 1
- Instruction Manual
3. Specifications
| Feature | Specification |
|---|---|
| Brand Name | FDIK |
| Model Name | FDIK Aluminum (FDIK-V Series) |
| Power (W) | 2000W (2KW) |
| Voltage | 12V |
| Fuel | Diesel |
| Switch Type | LCD Switch (FDIK-C24 External Switch) |
| Item Type | Heating & Fans |
| Material (Shell) | Aluminum |
| Item Weight | 4.7kg |
| Item Length | 32cm |
| Item Width | 12cm |
| Item Height | 12cm |
| Item Diameter | 6cm |
| External Testing Certification | CE |
| Origin | Mainland China |
| Special Features | Heating, Fast Heating, Energy Saving, Temperature Protection, Power Protection, Overheating Protection, Universal Voltage, Temperature Mode, Timing Function |
| Usage Scenario | Bus, Car, Yacht, Boat, Trailer, Household |


4. Installation
Proper installation is crucial for the safe and effective operation of your FDIK Diesel Parking Heater. Please follow these guidelines carefully.

4.1. General Installation Diagram
Refer to the 'Installation Diagram' in the image above for the general setup:
- Wiring: Connect the positive and negative main wires to the heater. Ensure correct polarity.
- Air Inlet/Outlet: The air inlet and air outlet must be reserved for air circulation. The air inlet and outlet should be kept unblocked.
- Oil Pump: The oil pump is preferred to be installed between 15° and 35° angles.
- Switch: Connect the switch to the main wire harness.
4.2. Recommended Installation Positions
Consider the following recommended positions based on your application:
- Truck:
- On the co-driver's legroom.
- On the back wall of the cab.
- Driver's seat backrest.
- Within the tool box.
- RV:
- In front of the passenger seat.
- Between the driver's seat and passenger seat.
- Under the container.
- In the trunk.
- 5 Seater / 7 Seater: The heater is mainly installed in the passenger room or luggage room of the vehicle. If it cannot be installed, fix the heater under the underside of the vehicle, but beware of splashing.
- Excavator:
- Inside the driver's seat.
- On the back wall of the cab.
- Inside the protection box.
5. Operation
Your FDIK Diesel Parking Heater can be controlled via the LCD switch or the remote controller.

5.1. Starting and Stopping
- Press the power button on the LCD switch or remote controller to turn the heater ON/OFF.
- After turning off, the heater will automatically cool down for a short period before completely shutting down. Do not cut power during this cooling phase.
5.2. Adjusting Power and Temperature
- Power Adjustment: After starting the heater, you can control its operation via the controller or remote control. The power can be regulated from H1 to H5.
- Temperature Adjustment: Hold the 'SET' button (top left) on the LCD switch to switch between power mode and temperature mode. In temperature mode, you can adjust the desired temperature, typically up to 40°C.
5.3. Timing Function
The FDIK 2021 heater model includes a timing function, allowing you to set the operating time according to your needs.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your heater.
- Cleaning: Periodically clean the air inlet and outlet grilles to ensure unobstructed airflow.
- Fuel System: Check the fuel lines and connections for any leaks or blockages. Ensure the fuel filter is clean.
- Electrical Connections: Inspect all electrical connections for tightness and corrosion.
- General Inspection: Regularly check the heater unit for any signs of damage or wear.
7. Troubleshooting
If you encounter issues with your heater, refer to the following common problems and solutions:
- Heater not starting: Check power connections, fuel supply, and ensure the switch is correctly connected.
- No heat output: Verify fuel flow, check for blockages in air ducts, and ensure the temperature setting is appropriate.
- Unusual noises: Inspect for loose components or obstructions in the fan.
- Error codes on LCD: Consult the specific error code section in the detailed manual (if provided with the product) or contact customer support.
8. User Tips
- For optimal performance, ensure the heater is installed in a well-ventilated area, especially if used in enclosed spaces like cabins or RVs.
- Always use high-quality diesel fuel to prevent clogging and ensure efficient combustion.
- Familiarize yourself with both the LCD controller and the remote control for convenient operation.
9. Warranty and Support
FDIK products are manufactured to high-quality standards and are certified for safety and performance.

For any technical assistance, warranty claims, or further inquiries, please contact FDIK Official Store customer service. Keep your purchase receipt as proof of purchase.