Superbat DB1-2080-1

Contents

Superbat DAB+ USB Adapter Receiver Instruction Manual

Model: DB1-2080-1 | Brand: Superbat

1. Introduction

The Superbat DAB+ USB Adapter Receiver is designed to provide Digital Audio Broadcast (DAB/DAB+) reception capabilities to compatible car Android systems. This device offers a low-cost, ultra-low power solution with stable RF quality, enhancing your in-car entertainment experience with digital radio. It supports advanced features such as auto local searching, RDS (Radio Data System), DLS (Dynamic Label Service), and SS (Slide Service).

Superbat DAB+ USB Adapter Receiver

Figure 1: Superbat DAB+ USB Adapter Receiver, showing USB connector and SMA antenna port.

2. Setup and Installation

This section details the steps required to install and set up your Superbat DAB+ USB Adapter Receiver.

2.1 System Requirements

  • Operating System: Android version 4.4.4 or over.
  • Host Device: Compatible Android car DVD player or navigation system with a USB port.
  • Antenna: SMA antenna (5V output).

2.2 Antenna Installation

Proper antenna installation is crucial for optimal signal reception. Follow these guidelines:

  1. Placement: It is recommended to install the DAB antenna on the top left or right corner of the car's front windshield.
  2. Interference: Be aware that some windshield protective films may weaken the signal. It is advisable to remove any small pieces of film or place the antenna in an area free of such materials.
  3. Grounding: Ensure the antenna's ground (black wire) makes good contact with the metal car body.
  4. Routing: Install the pillar inner carefully after connecting the antenna.
DAB+ Antenna Installation Guide

Figure 2: Antenna installation methods and considerations.

2.3 Device Connection

  1. Connect the SMA antenna to the SMA port on the DAB+ USB Adapter Receiver.
  2. Insert the USB connector of the DAB+ USB Adapter Receiver into an available USB port on your compatible Android car DVD player or navigation system.
  3. The device is designed for 'Plug & Play' operation, meaning the system should recognize it automatically.

2.4 Software Installation (if required)

While the device is generally Plug & Play, some Android car systems may require specific software or an application to manage DAB/DAB+ radio. If a software CD was included, use it to install the necessary application on your Android system. Otherwise, check your car system's app store or manufacturer's instructions for a compatible DAB+ application.

2.5 Compatible XTRONS Models

This adapter is compatible with various XTRONS Android car DVD players, including but not limited to:

  • PF75FSFA-S, PF75FSFA-B, PF7546BA, PF7553BA, PF7590BA
  • PF75AA3A, PF75AA4A, PF75ATTA, PF75AA3AR, PF75AA4AR, PF75ATTAR
  • PF75JCCA, PF75FFFA, PF85MTVA, PF75M203A, PF75M211A, PF75M245A, PF75M164A
  • PF75QSFA-B, PF75QSFA-S, PF75HGTA, PF75MTWA, PF7539BA
  • PC71FSFA-B, PC71FSFA-S, PC71OLOA-S, PC71OLOA-B, PC71OLOA-G
  • PC61HGTA, PC71MTVA, PC81MTVA, PC70MTVA, TL701A

3. Operating Instructions

Once the DAB+ USB Adapter Receiver is successfully installed and recognized by your Android car system, you can begin enjoying digital radio.

3.1 Scanning DAB/DAB+ Channels

  1. Open the DAB/DAB+ radio application on your Android car system.
  2. Navigate to the 'Scan' or 'Search' function within the application.
  3. Initiate an auto local search to find available DAB/DAB+ stations in your area.
  4. The application will display a list of found channels.

3.2 Playing DAB/DAB+ Radio Channels

  1. From the channel list, select your desired station.
  2. The application will begin playing the selected digital radio channel.

3.3 Advanced Features

  • DLS (Dynamic Label Service): Displays real-time text information from the broadcaster, such as song titles, artist names, news headlines, or traffic updates.
  • SS (Slide Service): Displays images or slideshows broadcast by the station, often related to the currently playing content or station branding.
  • Signal Strength Display: The application typically shows the current signal strength, which can be useful for optimizing antenna placement or troubleshooting reception issues.

4. Maintenance

The Superbat DAB+ USB Adapter Receiver requires minimal maintenance to ensure long-lasting performance.

  • Cleaning: Gently wipe the device with a dry, soft cloth. Avoid using liquid cleaners or solvents.
  • Storage: When not in use for extended periods, store the adapter in a cool, dry place away from direct sunlight and extreme temperatures.
  • Protection: Keep the USB port and SMA connector free from dust and debris. Use the protective cap for the SMA port when the antenna is disconnected.

5. Troubleshooting

If you encounter issues with your DAB+ USB Adapter Receiver, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Device not recognized by Android system.Incompatible Android version; faulty USB port; driver issue.Ensure Android version is 4.4.4 or higher. Try a different USB port. Check if specific drivers or an app are needed for your car system.
No DAB/DAB+ channels found or poor reception.Antenna not properly installed/grounded; weak signal area; interference.Verify antenna placement and grounding. Perform an auto local search. Move to an area with better DAB/DAB+ coverage. Check for windshield film interference.
No sound from DAB/DAB+ radio.Volume too low; audio output settings incorrect; app issue.Increase volume on both the car system and the DAB+ app. Check audio output settings in your Android system. Restart the DAB+ application.
DLS/SS information not displayed.Station not broadcasting DLS/SS; poor signal.Not all stations broadcast DLS/SS. Check with other stations. Improve signal reception.

6. Specifications

FeatureSpecification
Product TypeDAB / DAB+ Receiver
Model NumberDB1-2080-1
Brand NameSuperbat
Frequency RangeDAB Band III: 174.0MHz - 239.0MHz
InterfaceUSB
Antenna InterfaceSMA (5V output)
Supported FeaturesAuto local searching, RDS, DLS, SS, Channel list, Signal strength display
CompatibilityAndroid versions 4.4.4 or over
CertificationsCE, RoHS
OriginMainland China
Dimensions (Approx.)Length: 25 cm, Width: 15 cm, Height: 8 cm
Weight (Approx.)0.05 kg

7. User Tips

  • Check Android Version: Always verify that your car's Android system is running version 4.4.4 or newer for optimal compatibility.
  • Antenna Placement: Experiment with slight adjustments to your antenna's position if you experience intermittent signal loss, as even small changes can improve reception.
  • Software Updates: Keep your car's Android system and any installed DAB+ applications updated to ensure the best performance and compatibility.
  • CPU Compatibility: Be aware that while the device supports Android 4.4.4+, some specific CPU architectures in older or less common Android head units might require testing for full functionality.

8. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Retain your proof of purchase for any warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.