1. Product Overview
The Powallon TSDZ8 42T Offset Chainring (Model: PT81) is a dedicated single-disc chainring designed for Tongsheng TSDZ8 mid-drive motors. Crafted from high-strength AL7075-T6 aluminum alloy, this chainring is engineered for direct replacement without modifying the crankset or bottom bracket. The 42T variant is optimized for high-speed performance on flat roads, while a 38T variant (not covered in this manual) is available for enhanced hill climbing torque.
Key features include a lightweight design (approximately 298g), precision meshing to prevent chain skipping, an anodized black finish with CNC-cut edges for corrosion and wear resistance, and an integrated chain guard to protect clothing and prevent snags. The design also incorporates CNC-machined heat-dissipation grooves to reduce friction and prolong the life of the chain and chainring.


2. Specifications
| Attribute | Detail |
|---|---|
| Product Name | TSDZ8 Mid-Drive Motor Chainring |
| Model Number | PT81 |
| Type | Bicycle Chainwheel |
| Applicable Motor | Tongsheng TSDZ8 Mid-Drive Motors |
| Number of Teeth | 42T |
| Disc Type | Single-disc / Single-speed gear |
| Material | High-strength Aluminum Alloy (AL7075-T6) |
| Color | Anode Black |
| Surface Treatment | Anodizing / Sandblasting |
| Weight | 298g |
| Offset | 13mm |
| Characteristics | Integrated Chain Guard, Lightweight, Integrated unit |
| Use | Mountain Bikes, Electric Bicycles |
| Safety Certification | CE, RoHS |
| Origin | Mainland China |
| Package Dimensions | 19cm (L) x 19cm (W) x 2cm (H) |
| Package Weight | 0.3kg |

3. Setup and Installation
3.1. Preparation
- Tools Required: Hex key, torque wrench, puller (for removing old discs), rubber hammer, chain breaker.
- Safety First: Power off the entire vehicle, remove the battery, and detach the chain to prevent rotation interference during installation.
- Cleanliness: Ensure the motor crank mounting surface and screw holes are free of oil stains and impurities before proceeding.
3.2. Removal of Old Chainring
- Loosen the crankshaft fixing screw (typically an 8mm hex screw).
- Use a ram or appropriate tool to gently eject the old disc, avoiding damage to the crankshaft by hard prying.
- Thoroughly clean the mounting surface and screw holes.
3.3. Installation of New 42T Chainring
- Alignment: Align the new chainring's hole with the motor crank screw hole. Ensure the anti-misalignment groove or positioning pin is correctly seated.
- Pre-tightening: Insert the screws and tighten them diagonally in sequence, manually, without fully threading.
- Torque Lock: Using a torque wrench, tighten the screws diagonally in steps to a torque of 40–50 N·m.
- Inspection: After tightening, verify that the chainring shows no wobbling or deflection. Manually rotate the crank to ensure smooth operation.


Video 1: Demonstration of chainring installation and operation on an e-bike.
4. Operating Instructions
4.1. Chain and Debugging
- Reassemble the chain. Verify its length compatibility; adjust for overlong or underlong sections if necessary.
- Perform a power-on test. Ensure that both motor-assisted operation and manual pedaling are smooth, without any jerking, chain skipping, or abnormal noises.
4.2. Functional Features
- Lightweight and High-Strength: Constructed from AL7075-T6 aluminum for optimal performance and durability.
- Precision Meshing: Designed for smooth chain engagement, minimizing the risk of chain skipping.
- Direct Replacement: Can be installed without modifications to the existing crankset or bottom bracket.
- Optimized for Speed: The 42T configuration is ideal for achieving higher speeds on flat terrain.
5. Maintenance
- Regular Inspection: After every 50–100 km of cycling, check the screw torque to ensure all fasteners remain tight and prevent loosening.
- Environmental Protection: Keep the chainring and the motor crank mounting surface clean. Regularly remove any sand, dirt, or debris to prevent premature wear and ensure smooth operation.
6. Troubleshooting
- Loose Fit or Thread Damage: Ensure screws are tightened to the specified torque of 40–50 N·m using a torque wrench. Over-tightening can cause thread slippage or breakage, while under-tightening can result in a loose fit.
- Chain Skipping or Unusual Noises:
- Verify chain compatibility. Use a chain that matches the speed rating of your drivetrain (e.g., a 9-speed chain with a 9-speed system).
- Check for proper chain length and tension.
- Inspect the chainring for any damage or wear.
- Interference with Frame or Guard Plate: The 42T model is designed to prevent interference. If interference occurs, double-check installation and ensure no components are misaligned.
- General Malfunctions: If the motor-assisted operation or manual pedaling exhibits jerking or abnormal noises, re-check all installation steps and ensure all components are correctly assembled and tightened.
7. User Tips
Based on user feedback, please consider the following:
- Chainline Compatibility: While this chainring has a 13mm offset, some users have reported that the original TSDZ8 motor might have a larger offset (e.g., 20.4mm). This difference in offset can lead to chainline issues, causing the chain to cross excessively on certain gears, especially with multi-speed cassettes. It is crucial to verify the required offset for your specific TSDZ8 motor setup and bicycle frame to ensure optimal chainline and prevent premature wear or poor shifting performance.
- Narrow-Wide Profile: For single-speed setups or systems without a front derailleur, a narrow-wide chainring profile is typically recommended to prevent chain drops. If experiencing chain drops, consider if your setup requires a narrow-wide chainring or additional chain retention measures.

8. Important Notes
- Strict Model Compatibility: This chainring is compatible exclusively with Tongsheng TSDZ8 mid-drive motors. It is designed for the 42T configuration; 38T and 42T chainrings cannot be used interchangeably due to different design characteristics (e.g., 38T for climbing, 42T for speed).
- Modification Prohibited: Do not grind, enlarge holes, or use non-original screws. Any unauthorized modifications can compromise the integrity and safety of the chainring and may void any potential warranty.
For a detailed user manual, please refer to the official PDF document: Powallon TSDZ8 Chainring User Manual (PDF)
9. Warranty and Support
For any questions, technical support, or warranty inquiries, please contact Powallon customer service:
- Email: service@powallon-e.com
- Official Website: www.powallon-e.com