1. Introduction
The JONSBO ZC-360 is an innovative chassis fan designed to enhance both the cooling performance and aesthetic appeal of your PC build. It features three integrated 3.38-inch customizable LCD screens, vibrant 5V Addressable RGB (ARGB) lighting, and Pulse Width Modulation (PWM) control for efficient and quiet operation. The fan utilizes a durable ball bearing design and magnetic suction for easy and secure installation.
2. Safety Information
- Ensure your PC system is powered off and unplugged from the wall outlet before installation.
- Handle components with care to avoid damage from static electricity. Consider using an anti-static wrist strap.
- Do not attempt to modify the fan or its components. Unauthorized modifications may void your warranty and pose safety risks.
- Keep out of reach of children.
- Ensure proper ventilation around your PC to prevent overheating.
3. Package Contents
Please check the package for the following items:
- 1 x JONSBO ZC-360 Triple Screen Chassis Fan (Black or White model)
- Necessary connection cables (PWM 4PIN, ARGB 3PIN, LCD USB)
- Mounting screws (if applicable, for non-magnetic mounting options)
4. Setup Instructions
4.1 Physical Installation
The ZC-360 fan is designed for easy installation using strong magnetic suction. It can be attached to any suitable magnetic surface within your PC case, typically at the top or bottom, or against a radiator.
- Identify a suitable mounting location within your PC case. Ensure there is enough clearance for the fan unit (363.80mm L x 130mm W x 28mm H).
- Gently place the fan unit onto the desired magnetic surface. The four strong magnetic cores will securely attach the fan.
- Ensure the fan is stable and not prone to falling off.
4.2 Wiring Connections
Connect the fan to your motherboard or a compatible controller using the provided cables:
- PWM 4PIN Connector: Connect this to a 4-pin fan header on your motherboard. This allows for fan speed control based on system temperature.
- ARGB 3PIN Connector: Connect this to a 3-pin 5V ARGB header on your motherboard. This enables synchronized and customizable lighting effects. Note: Do NOT connect to a 12V RGB header, as this will damage the LEDs.
- LCD USB Connector: Connect this to an available internal USB 2.0 header on your motherboard. This is required for the screens to display information and for software control.
4.3 Software Installation
To fully utilize the screen customization and monitoring features, you will need to install the JONSBO screen display control software. Please refer to the official JONSBO website or the included QR code (if present) for the latest software download. Once installed, the software allows you to:
- Monitor CPU/GPU/RAM/FAN/HDD operation status.
- Select preset themes and display patterns.
- Customize display patterns and parameters.
- Upload and playback videos (GIF/JPG/MP4) on the screens.
5. Operating Instructions
5.1 Fan Speed Control (PWM)
The fan speed is automatically controlled via the PWM 4PIN connection to your motherboard. You can typically adjust fan curves and profiles through your motherboard's BIOS/UEFI settings or dedicated motherboard software to optimize cooling performance and noise levels.
5.2 ARGB Lighting Control
The 5V ARGB lighting can be synchronized with your motherboard's ARGB ecosystem (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync). Use your motherboard's software to customize colors, effects, and patterns. The 3-pin ARGB male and female design allows for daisy-chaining with other compatible ARGB devices.
5.3 Screen Customization
Utilize the JONSBO screen display control software (as described in Section 4.3) to personalize the three integrated screens. You can display real-time system information, custom images (JPG), animated GIFs, or even short videos (MP4) to match your system's theme or monitor critical data at a glance.
6. Maintenance
- Cleaning: Periodically clean the fan blades and screens to prevent dust buildup, which can affect performance and visibility. Use a soft, dry cloth for the screens and compressed air for the fan blades. Ensure the system is powered off before cleaning.
- Cable Management: Ensure all cables are neatly routed and secured to prevent interference with fan blades or other components.
- Software Updates: Regularly check the JONSBO official website for software and firmware updates to ensure optimal performance and access to new features.
7. Troubleshooting
- Fan Not Spinning:
- Check if the 4PIN PWM connector is securely plugged into the motherboard fan header.
- Verify fan settings in BIOS/UEFI or motherboard software.
- ARGB Lights Not Working/Incorrect Colors:
- Ensure the 3PIN ARGB connector is correctly plugged into a 5V ARGB header (not 12V RGB).
- Check ARGB software settings on your motherboard.
- Confirm compatibility with your motherboard's ARGB software.
- Screens Not Displaying/Blank:
- Verify the LCD USB connector is securely plugged into an internal USB 2.0 header.
- Ensure the JONSBO screen display control software is installed and running.
- Check for any error messages within the software.
- Magnetic Suction Not Holding:
- Ensure the mounting surface is clean and free of obstructions.
- Verify the surface is ferrous (magnetic).
8. Specifications
| Feature | Specification |
|---|---|
| Model | ZC-360B / ZC-360W |
| Fan Size (L x W x H) | 363.80mm x 130mm x 28mm |
| Fan Speed | 700 - 2400 RPM (± 10%) |
| Airflow Volume | 21.46 - 62.40 CFM |
| Wind Pressure | 0.49 - 2.46 mmH2O |
| Noise Level | 21.3 - 37.3 dB(A) |
| Rated Voltage (Fan) | DC 12V |
| Rated Voltage (LED) | 5V |
| Rated Current (Fan) | 0.51A |
| Rated Current (LED) | 0.48A |
| Power (Fan) | 6.12W |
| Power (LED) | 2.4W |
| Life Expectancy (MTTF) | ≥ 70,000 hours (at 25 ℃ Room Temp) |
| Bearing Type | Two Ball Bearing (Bidirectional) |
| Blade Quantity | 9 |
| Connectors | PWM 4PIN, ARGB 3PIN, LCD USB |
| Screen Type | 3 x 3.38-inch IPS LCD |
| Screen Resolution | 640 x 180 DPI |
| Screen Brightness | 350 NITS Peak Brightness |
| Certification | CE, RoHS |
9. User Tips
- Aesthetic Appeal: Many users find the ZC-360 to be a visually stunning addition to their PC, especially with customized screen content. Experiment with different GIFs or system monitoring displays to personalize your build.
- Straightforward Setup: Users have reported that the installation and initial setup are generally smooth, with the fan and screens functioning correctly right out of the box.
- Triple Fan Unit: The ZC-360 is a single unit comprising three fans and three screens, providing a cohesive look and integrated functionality.
10. Warranty and Support
JONSBO products are manufactured to high-quality standards. This product comes with a 5-year warranty from the date of purchase, covering manufacturing defects. For technical support, warranty claims, or further assistance, please contact your retailer or visit the official JONSBO website for contact information.