Pzsunly RGB 8-Color Motion Sensor Toilet Night Light

Contents

PZSUNLY RGB 8-Color Motion Sensor Toilet Night Light User Manual

Model: RGB 8-Color Motion Sensor Toilet Night Light

1. Introduction

Thank you for choosing the PZSUNLY RGB 8-Color Motion Sensor Toilet Night Light. This innovative device is designed to provide convenient, soft illumination for your toilet bowl, enhancing safety and comfort during nighttime visits. Featuring motion detection, 8 vibrant color options, and a rechargeable, waterproof design, it's an ideal addition to any bathroom.

PZSUNLY RGB Toilet Light packaging and product view

Figure 1: PZSUNLY RGB Toilet Light Product Overview

2. Safety Information

  • Do not immerse the entire device in water, despite its IP65 rating. The IP65 rating protects against water jets, not full submersion.
  • Keep out of reach of children.
  • Do not attempt to disassemble or modify the device.
  • Use only the provided charging cable or a certified equivalent.
  • Avoid exposing the device to extreme temperatures or direct sunlight for prolonged periods.
  • Ensure the device is securely attached to prevent it from falling into the toilet bowl.

3. Package Contents

  • 2 x PZSUNLY RGB Motion Sensor Toilet Night Lights
  • 2 x USB Charging Cables
  • 1 x User Manual (this document)

4. Specifications

FeatureSpecification
BrandPzsunly
ModelRGB 8-Color Motion Sensor Toilet Night Light
Luminous Flux<60
Voltage4.5V
Bulbs IncludedYes
Body MaterialABS
CertificationCE, EMC, FCC, ROHS
ShapeDIY
Power GenerationMotion
TypeNight Light
OriginMainland China
Batteries RequiredYes (Internal rechargeable)
Batteries IncludedYes (Internal rechargeable Lithium Metal)
Smart DeviceYes
Battery Capacity500mAh
Waterproof RatingIP65
Motion Sensor RangeUp to 13 ft (4 meters), 120 degrees
Auto-off Time90 seconds (after inactivity)
Color Options8 RGB Colors
Package Dimensions11cm (L) x 10cm (W) x 3cm (H)
Package Weight0.101 kg
Dimensions of the ultra-slim toilet night light

Figure 2: Product Dimensions

Features: 500mAh battery, IP65 waterproof, slim design

Figure 3: Key Features (Battery & Waterproof)

5. Setup and Installation

The PZSUNLY Toilet Night Light is designed for easy, tool-free installation.

  1. Choose a location: Identify a suitable spot on the rim of your toilet bowl.
  2. Bend the hose: Gently bend the flexible arm (hose) of the light to fit snugly over the edge of the toilet bowl.
  3. Hang the lamp: Place the light unit on the toilet rim, ensuring the sensor faces outwards towards the bathroom entrance and the LED light is positioned inside the bowl.
Step-by-step installation guide for the toilet night light

Figure 4: Installation Steps

6. Operating Instructions

Power On/Off and Color Selection

  • To Turn On: Tap the button once. The light will illuminate.
  • To Select Color: After turning on, tap the button again to cycle through the 8 available colors. Stop tapping when your desired color is displayed.
  • To Power Off: Long press the button until the light turns off.

Motion Sensor Function

The toilet night light features a built-in motion sensor and light sensor. It will automatically turn on in the dark when motion is detected within its range (up to 13 feet and 120 degrees). The light will automatically turn off approximately 90 seconds after no motion is detected.

Motion sensor detection range and function in a bathroom setting

Figure 5: Motion Sensor Operation

Demonstration of the 8 color options in a toilet bowl

Figure 6: 8 Color Options

Product Demonstration Video

Video: Product demonstration showing operation and installation.

7. Maintenance

  • Cleaning: Wipe the device with a damp cloth. Do not use abrasive cleaners or immerse in water.
  • Charging: When the light dims or stops responding, it's time to recharge. Connect the provided USB cable to the charging port on the device and a standard USB power source. A full charge lasts up to a whole month.
  • Storage: If storing for an extended period, ensure the device is fully charged and stored in a cool, dry place.

8. Troubleshooting

ProblemPossible CauseSolution
Light does not turn on.Low battery.Charge the device using the provided USB cable.
Insufficient darkness.The light sensor prevents activation in bright environments. Test in a darker setting.
Motion sensor not working.Obstruction or incorrect positioning.Ensure the sensor is clear of obstructions and facing the area where motion is expected.
Battery low.Recharge the device.
Colors are not changing.Button not tapped correctly.Ensure you are tapping the button briefly to cycle through colors. A long press will turn off the device.

9. User Tips

  • For optimal performance, ensure the light is fully charged before its initial use.
  • Position the motion sensor strategically to face the primary entry point of your bathroom for reliable activation.
  • Regularly clean the device with a damp cloth to maintain hygiene and ensure accurate sensor readings. Avoid using harsh chemical cleaners.
  • If the light is too bright or too dim, consider adjusting its position or the ambient light in the room.

10. Warranty and Support

For warranty information or technical support, please refer to the seller or your purchase documentation. Keep your proof of purchase for any warranty claims.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.