ECHTPower Wireless Controller Gamepad ES01 User Manual

1. Package Contents

The ECHTPower Wireless Controller Gamepad ES01 package includes the following items:

• Wireless Controller x 1
• Charging Cable x 1
• Instruction Manual x 1

For a visual reference of the controller and its components, please refer to the specification diagram below.

2. Technical Specifications

3. Setup

3.1 Initial Activation and Power

• Initial Use: Before first use, the controller must be charged using the provided data cable to activate it.
• Power On: Press the Home button lightly.
• Power Off: Press the pairing button lightly.

3.2 Connection Methods for Various Devices

The controller supports various connection methods depending on the platform:

Note for Switch Wired Connection: When connecting to the Switch via a wired connection, ensure that the "Settings → Handle and Sensor → Pro Handle Wired Connection" function is enabled on your Nintendo Switch console.

4. Operating Instructions

4.1 Turbo Rapid Fire Function

Supported buttons for Turbo: A, B, X, Y, L, R, ZL, ZR, D-pad.

• Manual Turbo: Hold the 'T' button, then press and hold one of the supported buttons for 3 seconds. The controller will vibrate once to activate manual rapid fire.
• Automatic Turbo: Hold the 'T' button, then press and hold the button already configured for manual rapid fire again for 3 seconds. The controller will vibrate once to activate automatic rapid fire.
• Disable Turbo: Hold the 'T' button, then press and hold the button configured for automatic rapid fire again for 3 seconds. The controller will vibrate once to disable the rapid fire function for that button.
• Clear All Turbo Settings: Press and hold the 'TURBO' button for 3 seconds to clear rapid fire settings for all buttons.
• Speed Adjustment: Rapid fire speed can be adjusted to fast, medium, or slow. The default speed is slow. Hold the 'TURBO' button on the controller and simultaneously move the right joystick up or down to adjust the speed.

4.2 Macro Setting for Back Buttons

Supported buttons for Macro: A, B, X, Y, L, R, ZL, ZR, L3, R3, D-pad.

• Entering Programming Mode: Press and hold the 'M' button for 2 seconds. The left and right 3D rings will slowly flash (requires LED effects to be enabled), indicating the controller has entered programming mode.
• Mapping a Button: Press the button you want to program (map). The left and right 3D rings will flash quickly.
• Programming Confirmation: Press 'ML' or 'MR'. The left and right 3D rings will change from fast flashing to steady, indicating successful button programming (mapping).
• Note: You can program up to 16 buttons. If no button is pressed for more than 1 minute, the controller will automatically exit programming mode.
• Clearing Settings: After holding the 'M' button for 2 seconds and seeing the left and right 3D rings flash slowly, press 'ML' or 'MR' to clear the programmed back button settings.

4.3 Light Adjustment (RGB Lighting)

• Light Key + R3: Switch between 3 modes (steady, breathing/running horse, rainbow).
• Light Key + L3:
  • In steady mode: Switch colors.
  • In breathing/running horse mode: No effect.
  • In rainbow mode: Pause rainbow effect.
• '+' and Turbo Combo Key: Press both simultaneously for 3 seconds; the motor vibrates briefly, resetting the lights to default settings.
• Toggle Joystick Ring Lighting: Press and hold the lighting button for 10 seconds to turn off the 3D joystick ring lighting. Press and hold the lighting button again for 10 seconds to reactivate the joystick ring lighting.

4.4 Vibration Adjustment

• Adjusting Intensity: After connecting the controller, hold the vibration button on the back of the controller while moving the left 3D joystick up or down to increase or decrease motor vibration intensity. The controller will provide 3 seconds of vibration feedback after adjustment. Four intensity levels are available: 100%, 70%, 30%, and 0%, with 70% set as default.
• Disable/Re-enable Vibration: Press and hold the vibration switch for 10 seconds to disable the vibration function of both motors. Press and hold the vibration switch again for 10 seconds to re-enable the vibration function of both motors.

5. Maintenance and Care

5.1 Charging

• Connect the adapter using a USB data cable. The charging indicator will remain orange while charging.
• Once fully charged, the orange charging indicator will turn off.

5.2 Low Battery Indication

• When the battery is low, the light of the current channel will flash quickly as a reminder to charge the controller.

5.3 Standby Mode

• When the controller is powered on, short press the "Pairing" button to enter standby mode.
• If the controller is in pairing mode and pairing is unsuccessful after 60 seconds, it will automatically enter standby mode.
• When the controller is connected to the console, it will automatically enter standby mode after 15 minutes of inactivity.

6. Troubleshooting

6.1 Resetting the Controller

• If the controller malfunctions or behaves abnormally, you can reset it by pressing and holding the "HOME" button for 10 seconds.

6.2 Resolving Joystick Drift

Joystick drift can occur if the joystick is pushed during the wireless connection process. To prevent and resolve this issue:

• Preventing Drift: When connecting the controller wirelessly, ensure you do not touch or push the joysticks.
• Solving Drift: If joystick drift occurs, disconnect the controller and then reconnect it wirelessly, making sure not to touch the joysticks during the reconnection process. This should resolve the problem.

7. User Tips

• Zero Joystick Drift: The Hall Effect technology ensures lasting precision and eliminates joystick drift, making it ideal for competitive gaming.
• Customizable RGB Lighting: Personalize your controller with 9 dynamic RGB lighting effects (Steady, Breathing, Chase, Rainbow) and adjustable colors to match your gaming setup or mood.
• Programmable Macros & Turbo: Utilize the M1/M2 buttons to assign complex command sequences for one-click execution, giving you an edge in games. The Turbo mode offers three speed settings (5, 12, or 25 presses per second) for rapid-fire actions.
• Enhanced Motion Controls: The 6-axis Gyro provides pinpoint accuracy for motion-controlled games. Adjust the dual motor vibration to one of four levels (Strong, Medium, Weak, Off) for immersive haptic feedback.
• Ergonomic Comfort: The controller's ergonomic grip is designed to reduce hand fatigue during long gaming sessions, allowing for more comfortable extended play.
• Quick Wake-Up: Save time by using the one-tap Wake-Up feature; simply press the Home button to instantly wake your Nintendo Switch from sleep mode.

8. Warranty and Support

8.1 Contact Information

For any inquiries or support, please use the following contact details:

• Telephone: 0755-21010839
• Email: service@echtpower.com
• Website: www.echtpower.com
• Manufacturer: Shenzhen Mike Morgen Technology Co., Ltd
• Manufacturer Address: Room 302, 3rd Floor, Building 5, Zone C, Jinxiu Huacheng Science and Technology Park, No. 36 Xiangjiaotang Second Road, Xiangjiaotang Community, Bantian Street, Longgang District, Shenzhen

8.2 Compliance and Declarations

The ECHTPower Wireless Controller Gamepad ES01 conforms to relevant international standards:

• CE Declaration of Conformity: The product conforms to EC standards for radio interference. The full text of the EU Declaration of Compliance can be found on www.echtpower.com.
• UKCA Declaration of Compliance: The product conforms to UK standards for radio interference. The full text of the UKCA Declaration of Compliance can be found on www.echtpower.com.
• FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction. FCC ID: 2A88F-ES01.

8.3 Environmental Information

The symbol indicates that the product should not be disposed of with household waste but brought to an appropriate collection point for recycling. According to local regulations, do not dispose of the product or rechargeable battery with normal household waste. Appropriate disposal of used products and rechargeable batteries helps to prevent negative impacts on the environment and human health.

8.4 Precautions

• Do not expose to liquid.
• Do not disassemble the product.
• Avoid dropping the product.
• Avoid extremely high or low temperatures.