1. Product Overview
This high-quality electronic component module is designed for DIY electronic projects, industrial control equipment, portable devices, and precision electronic products. It features a compact size, stable performance, easy installation, and low power consumption. The board efficiently and safely provides essential functions such as overcharge, over-discharge, overcurrent, and short circuit protection for 2S (7.4V/8.4V) Li-ion 18650 lithium battery packs, significantly extending battery service life.

2. Safety Warnings
- Professional operation is recommended. Avoid touching circuit pins or interfaces during operation to prevent electric shock or module damage.
- Ensure input voltage/current matches the module's rated parameters. Do not overload or exceed the maximum rated value.
- Keep away from water, moisture, high temperature, flammable materials, and strong electromagnetic interference sources.
- Do not disassemble, modify, or repair the module without permission. Disconnect all power supplies before wiring or maintenance.
- Avoid short circuits of pins or interfaces. Reverse connection of positive and negative poles may cause burnout or fire hazard.
- For battery-related modules, use only compatible battery types (e.g., Li-ion) to avoid explosion or leakage.
3. Pin & Interface Definition
The protection board features several connection points. Refer to the table and diagrams for proper identification:
| Interface/Pin | Label | Function |
|---|---|---|
| Battery Positive | B+ | Connect to the positive terminal of the battery pack. |
| Battery Negative | B- | Connect to the negative terminal of the battery pack. |
| Battery Middle | BM | Connect to the middle connection point between the two 18650 cells for balancing. |
| Output/Charge Positive | P+ | Positive terminal for load connection and charger input. |
| Output/Charge Negative | P- | Negative terminal for load connection and charger input. |

4. Installation & Wiring (Setup)
Follow these steps for safe installation and wiring (professional operation recommended):
- Disconnect Power: Always disconnect all power supplies before wiring to avoid electric shock or module damage.
- Connect Components: Connect the battery pack (2S Li-ion 18650 cells), load, and charger to the corresponding pins/interfaces on the protection board. Ensure correct polarity (avoid reverse connection).
- Verify Wiring: Carefully check all wiring to ensure there are no short circuits, reverse connections, or loose contacts.
- Apply Power: After confirming the wiring is correct and secure, connect the power supply. The module should then operate normally.


5. Usage (Operating)
- Do not exceed the module's rated parameters (voltage, current, power) during use to avoid damage.
- Keep the module in a well-ventilated environment. Slight heating during operation is normal. If overheated, disconnect power immediately.
- Use the module in the corresponding scenario according to its function (e.g., as a power module for power supply).
6. Specifications
| Parameter | Value |
|---|---|
| Model | 2S 7.4V 8A Li-ion 18650 Protection Board |
| Supply Voltage | 7.4V / 8.4V |
| Maximum Working Current | 8A |
| Maximum Instantaneous Current | 16A |
| Static Current | Less than 10µA |
| Resistance | Less than 300mΩ |
| Charging Voltage | 8.4V - 9V |
| Overcharging Range | 4.25V - 4.35V (± 0.05V) |
| Over-discharge Voltage Range | 2.5V - 3.0V (± 0.05V) |
| Working Temperature | -40°C to +50°C |
| Storage Conditions | -40°C to +80°C |
| Protective Plate Size | 41mm * 8mm * 2.2mm |
| Effective Life | More than 50,000 hours |
| Short Circuit Protection | To protect and restore, must charge. |
| Package Type | SOP |
| Application | Computer (general electronic applications) |
| Type | Voltage Regulator |




7. Troubleshooting
- No function/output: Check power supply, wiring connection, pin definition, and input parameters.
- Unstable performance: Ensure input voltage is stable, avoid overload, poor contact, and electromagnetic interference.
- Module overheating: Reduce load, improve ventilation, or check for short circuits.
- Abnormal noise/indicator: Keep away from interference sources, check wiring tightness, and inspect for module damage.
- If the module stops working, disconnect power first, check wiring and parameters, then restart after troubleshooting.
- Turn off the power before disassembling, maintaining, or replacing the module.
8. User Tips
- Always double-check all connections before applying power to prevent damage.
- Ensure your battery cells are compatible with a 2S configuration and the board's voltage requirements.
- For optimal performance and longevity, avoid operating the board at its maximum current limits continuously.
9. Warranty & Support
Warranty
This product comes with a 12-month warranty covering manufacturing defects only. This warranty excludes man-made damage, overload, improper use, or operational errors.
Maintenance
To ensure the longevity of your protection board, keep it clean and free from dust and moisture. Periodically inspect connections for tightness and signs of corrosion. Always disconnect power before performing any maintenance.
Contact Information
Manufacturer Contact:
Tel: 86-13692003903
Email: qwbmajialong@vip.qq.com
Address: Room 301, Building 2, Yongchangjia Phase II, Huamei Street, Yangmei Road, Bantian Street, Longgang District, Shenzhen, Guangdong Province, China, Postcode: 518000
EU Authorized Representative (Compliance Responsible Person):
APEX CE SPECIALISTS LIMITED
Tel: 353-2066339
Email: INFO@APEX-CE.COM
Address: UNIT 3D NORTH POINT HOUSE NORTH POINT BUSINESS PARK NEW MALLOW ROAD CORK T23 AT2P, IRELAND
For further detailed instructions, you may refer to the official user manual PDF: View User Manual (PDF)