LANDTEK FM-100V5

Contents

FM-100V5 Handheld River Flow Meter User Manual

Model: FM-100V5 | Brand: LANDTEK

1. Introduction

The LANDTEK FM-100V5 Portable River Flow Meter is a specialized instrument designed for accurate measurement of flow velocity in open channels. It is suitable for various applications including hydrological stations, factories and mines, environmental protection monitoring, farmland irrigation and drainage, and hydrogeology surveys.

This manual provides detailed instructions for the proper setup, operation, and maintenance of your FM-100V5 flow meter to ensure optimal performance and longevity.

2. Specifications

FeatureSpecification
Model NumberFM-100V5
TypeRiver Water Flow Meter / Hand Tool Parts
Speed Range0.01 - 5.00 m/s
Current Measurement Error≤1.5%
Measurement MethodPole positioning measurement
FormulaV = KN/T - C (m/s) (automatic computer)
Instrument Constantsk: 0.0500, c: 0.0100
Power Supply4 * 7 batteries
LCDLiquid Crystal Display
BacklightLED backlight
Operating Temperature-10 °C to 50°C
Operating HumidityUp to 60% RH
Protection ClassIP65
Host Size75mm x 135mm x 25mm
MaterialABS / 304 Stainless Steel
OriginGuangdong, China
Warranty Period1 Year
FM-100V5 Flow Meter with dimensions and probe assembly
Figure 1: FM-100V5 Flow Meter with main unit dimensions (75mm x 135mm x 25mm) and probe assembly (300mm and 200mm sections).

3. Package Contents

Upon opening the package, please verify that all standard accessories are present and in good condition:

  • Speedometer (Main Unit)
  • Probe Rod Paddle (Sensor)
  • Signal Line
  • Package Packing Box
  • Instructions Manual

Optional Accessories:

  • Extension Rods (two extension rods are typically included, making the sensor about 0.6 meters long when assembled)
All components of the FM-100V5 kit
Figure 2: Complete FM-100V5 kit components, including the main unit, probe, signal cable, and extension rods.
FM-100V5 kit inside its carrying case
Figure 3: The FM-100V5 kit neatly packed within its protective carrying case.

4. Setup Instructions

  1. Battery Installation: Open the battery compartment on the back of the main unit. Insert four (4) '7' type batteries, ensuring correct polarity. Close the compartment securely.
  2. Probe Assembly: Connect the probe rod paddle (sensor) to the extension rods. The sensor is approximately 0.6 meters long when fully assembled with the two extension rods. Ensure all connections are tight.
  3. Connect Signal Line: Locate the circular connector port on the side of the main unit. Connect one end of the signal line to this port and the other end to the assembled probe. Ensure the connection is firm to prevent signal loss during operation.
  4. Power On: Press the 'POWER' button on the main unit to turn on the device. The LED backlight LCD will illuminate.
Close-up of the sensor connector on the FM-100V5
Figure 4: Detail of the sensor connector port on the FM-100V5 main unit.
Image of the flow meter's sensor/paddle wheel
Figure 5: Close-up of the paddle wheel sensor, responsible for measuring flow velocity.

5. Operating Instructions

The FM-100V5 uses a pole positioning measurement method to determine water flow velocity.

  1. Prepare for Measurement: Ensure the probe is fully assembled and connected to the main unit. The device should be powered on.
  2. Position the Probe: Carefully lower the probe into the water channel at the desired measurement depth. Ensure the paddle wheel is fully submerged and facing the direction of the flow. The pole positioning method requires holding the probe steady at a specific point.
  3. Take Readings: The LCD will display the measured flow velocity (V) in meters per second (m/s). The device automatically calculates the velocity based on the formula V = KN/T - C, where K and C are instrument constants (k:0.0500, c:0.0100), N is the number of rotations, and T is the measurement time.
  4. Monitor Display: Observe the liquid crystal display for stable readings. The LED backlight ensures visibility in various lighting conditions.
  5. Record Data: Manually record the displayed velocity readings as needed for your survey or monitoring tasks.
Close-up of the FM-100V5 flow meter display
Figure 6: Close-up of the FM-100V5 display showing measurement data.
Image of the flow meter and probe in use, possibly in water
Figure 7: The FM-100V5 flow meter probe positioned in a water channel for measurement.
Image of the flow meter's control panel
Figure 8: The control panel of the FM-100V5, showing the 'POWER', 'EXIT', and 'MENU' buttons.

Video 1: An overview of the FM-100V5 Handheld River Flow Meter, demonstrating its components and general use.

6. Maintenance

  • Cleaning: After each use, especially in turbid water, rinse the probe and paddle wheel with clean fresh water. Gently remove any debris or sediment that may have accumulated.
  • Drying: Ensure all components, especially the sensor and connectors, are thoroughly dried before storage to prevent corrosion.
  • Storage: Store the FM-100V5 in its protective carrying case in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Battery Care: If the device will not be used for an extended period, remove the batteries to prevent leakage and damage to the unit.
  • Inspection: Periodically inspect the signal line for any signs of wear, cuts, or damage. Check the paddle wheel for free rotation and ensure no foreign objects are obstructing it.

7. Troubleshooting

  • Device does not power on:
    • Check if the batteries are correctly installed and have sufficient charge. Replace if necessary.
    • Ensure the battery compartment is securely closed.
  • No readings or unstable readings:
    • Verify that the signal line is securely connected to both the main unit and the probe.
    • Ensure the paddle wheel is fully submerged and rotating freely without obstruction.
    • Check for any damage to the paddle wheel or sensor.
    • Confirm the probe is positioned correctly in the flow.
  • LCD display issues:
    • If the display is dim, check battery levels.
    • If segments are missing, contact support.

8. User Tips

  • For consistent readings, try to maintain a stable position for the probe during measurement.
  • Avoid measuring in areas with excessive turbulence or debris, as this can affect accuracy and potentially damage the paddle wheel.
  • Always clean and dry the unit thoroughly after use to prolong its lifespan.
  • Keep a spare set of batteries on hand for uninterrupted operation in the field.

9. Warranty and Support

The FM-100V5 Handheld River Flow Meter comes with a 1-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.

For technical support, warranty inquiries, or any questions regarding your device, please contact us:

  • Email: hnkrdzsw0621@126.com
  • WhatsApp: +86 19974990436
  • IMessage: 19974990436 (If unable to receive messages, please contact via email directly.)
  • WeChat: 19974990436

© 2024 LANDTEK. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.