Commercial Soft Ice Cream Machine ZB-BQL28

Contents

ZB-BQL28 Commercial Soft Ice Cream Machine User Manual

Model: ZB-BQL28

1. Introduction

Thank you for choosing the ZB-BQL28 Commercial Desktop Soft Ice Cream Machine. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new ice cream machine. Please read this manual thoroughly before using the appliance and keep it for future reference.

The ZB-BQL28 is a compact, single-head desktop soft ice cream machine designed for commercial use, offering efficient refrigeration and consistent ice cream production.

2. Safety Instructions

  • Always ensure the machine is connected to a grounded power outlet with the correct voltage (220V or 110V as specified for your model).
  • Do not operate the machine with wet hands or in wet conditions to prevent electric shock.
  • Keep hands and foreign objects away from moving parts during operation.
  • Ensure proper ventilation around the machine to prevent overheating. Do not block air vents.
  • Unplug the machine before cleaning, maintenance, or if it will be unused for an extended period.
  • Use only food-grade ingredients and follow proper hygiene practices to prevent contamination.
  • Do not immerse the machine's main body in water or other liquids.
  • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

3. Product Overview

The ZB-BQL28 is a desktop soft ice cream machine featuring a single dispensing head. It is available in various colors, including metal primary color (silver), phantom purple, and red, each offering the same robust performance.

Purple ZB-BQL28 Soft Ice Cream Machine with ice cream cones
A purple ZB-BQL28 soft ice cream machine, highlighting its new product status and efficient refrigeration capabilities. (Text on image: 新品上市 高效制冷 - New product launch, efficient refrigeration)
Silver ZB-BQL28 Soft Ice Cream Machine with dimensions and specifications
Silver ZB-BQL28 desktop single-head soft ice cream machine, showing its dimensions (20cm W x 40cm D x 51cm H) and key specifications. (Text on image: 金属原色 台式单头 - Metal primary color, Desktop single head)
Purple ZB-BQL28 Soft Ice Cream Machine with dimensions and specifications
Phantom purple ZB-BQL28 desktop single-head soft ice cream machine, detailing its dimensions and specifications. (Text on image: 幻影紫 台式单头 - Phantom purple, Desktop single head)
Red ZB-BQL28 Soft Ice Cream Machine with dimensions and specifications
Red ZB-BQL28 desktop single-head soft ice cream machine, displaying its dimensions and specifications. (Text on image: 奶蜡白 台式单头 - Milk wax white, Desktop single head)

4. Setup

  1. Unpacking: Carefully remove the machine from its packaging. Inspect for any shipping damage.
  2. Placement: Place the machine on a stable, level, and sturdy surface. Ensure there is adequate space around the machine (at least 15 cm on all sides) for proper ventilation. Avoid placing it near heat sources or in direct sunlight.
  3. Initial Cleaning: Before first use, thoroughly clean all parts that will come into contact with food, including the hopper, freezing cylinder, dispensing head, and drip tray. Use mild soap and warm water, then rinse thoroughly and dry completely. Refer to the 'Maintenance' section for detailed cleaning instructions.
  4. Power Connection: Verify that the machine's voltage (220V or 110V) matches your power supply. Plug the machine into a dedicated, grounded electrical outlet.

5. Operating Instructions

  1. Prepare Ice Cream Mix: Follow the instructions for your chosen soft ice cream mix. Ensure the mix is properly prepared and chilled according to the manufacturer's recommendations.
  2. Pour Mix into Hopper: Open the lid of the hopper and carefully pour the prepared liquid ice cream mix into the hopper. Do not overfill.
  3. Start Machine: Turn on the main power switch. Select the 'Production' or 'Freeze' mode on the control panel. The machine will begin the freezing process.
  4. Monitor Consistency: The machine will typically have an indicator or a timer to show when the ice cream has reached the desired consistency. This usually takes several minutes, depending on the mix and ambient temperature.
  5. Dispense Ice Cream: Once the ice cream is ready, place a cone or cup under the dispensing nozzle. Pull down the dispensing handle to release the soft ice cream. Push the handle back up to stop dispensing.
  6. Refill: When the mix level in the hopper is low, add more prepared mix to continue production.

6. Maintenance

Regular cleaning and maintenance are crucial for the longevity and hygienic operation of your ice cream machine.

Daily Cleaning

  1. Empty Remaining Mix: At the end of each day, or when changing flavors, dispense any remaining ice cream mix.
  2. Rinse: Pour warm water (not hot) into the hopper and run the machine in 'Wash' or 'Clean' mode for a few minutes to rinse the freezing cylinder. Dispense the water. Repeat until the water runs clear.
  3. Disassemble: Turn off and unplug the machine. Disassemble the dispensing head, including handles, pistons, and seals. Remove the beater/auger from the freezing cylinder.
  4. Wash Parts: Wash all disassembled parts with warm water and a food-grade detergent. Use a brush to clean thoroughly.
  5. Sanitize: Sanitize all parts using a food-grade sanitizer solution according to the sanitizer manufacturer's instructions.
  6. Dry and Reassemble: Allow all parts to air dry completely before reassembling. Ensure all seals and O-rings are correctly seated to prevent leaks.

Periodic Maintenance

  • Regularly check and replace worn seals and O-rings to prevent leaks and ensure optimal performance.
  • Clean the air filter (if applicable) on the side or back of the machine to maintain efficient cooling.
  • Inspect electrical cords and plugs for any damage.

7. Troubleshooting

ProblemPossible CauseSolution
Machine does not turn onNo power supply; Power cord loose; Fuse blown; Main switch offCheck power outlet; Ensure cord is securely plugged in; Check and replace fuse; Turn on main switch
Ice cream is too soft/not freezingMix not chilled; Freezing time too short; Refrigeration system issue; Air vents blockedPre-chill mix; Increase freezing time; Contact support; Clear air vents
Ice cream is too hardFreezing time too long; Mix too thickReduce freezing time; Adjust mix consistency
Machine is leakingSeals/O-rings worn or improperly installed; Dispensing head not assembled correctlyInspect and replace seals/O-rings; Reassemble dispensing head carefully
Unusual noise during operationLoose parts; Motor issue; Insufficient lubricationCheck for loose components; Contact support for motor issues; Ensure proper lubrication if applicable

8. Specifications

FeatureSpecification
ModelZB-BQL28
TypeDesktop, Single Head
Dimensions (W x D x H)20 cm x 40 cm x 51 cm
Rated Voltage220V (Customizable to 110V)
Rated Power450W
Hourly Output4-5 kg/h
Continuous PerformanceApprox. 1 cone/minute (standard 80g/cone)
Package Dimensions (L x W x H)48 cm x 25 cm x 55 cm
Package Weight20.0 kg
OriginMainland China

9. User Tips

  • Always use high-quality soft serve mix for the best results and machine performance.
  • Ensure the mix is properly chilled before pouring it into the machine's hopper. This reduces freezing time and strain on the compressor.
  • Regularly check the consistency of the ice cream, especially during peak usage, to ensure it meets your desired texture.
  • Do not leave unused mix in the machine overnight. Always clean the machine thoroughly after each day's use.
  • Keep spare O-rings and seals on hand, as these are common wear-and-tear parts that may need periodic replacement.

10. Warranty and Support

For any issues, questions, or to inquire about warranty services, please contact your seller or the manufacturer directly. Ensure you have your purchase details and the product model number (ZB-BQL28) ready when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.