1. Introduction
Thank you for choosing the Radtel RT-920 Two Way Radio. This advanced communication device is designed for high performance, convenience, and reliability. Please read this manual thoroughly to ensure safe and optimal operation of your device.
Key Features:
- Bluetooth App Programming: Easily program and manage radio settings via a dedicated mobile app (iOS and Android).
- High Output Power (10W): Provides long-range, stable communication.
- Advanced Noise Reduction: Built-in digital noise cancellation for clear audio.
- Integrated Spectrum Analyzer: Real-time signal analysis for efficient frequency usage.
- Type-C Charging & Desktop Charger: Convenient and fast recharging options.
- Wireless Frequency Copy: Effortlessly copy frequency settings between devices.
- NOAA Weather Channel Support: Access to weather alerts and updates.
- Shortwave Reception: Supports SW, MW, LW bands for broader communication.
- Channel Zone Function: Efficient channel organization and management.
- Full-Color Display: Vibrant, high-resolution screen for enhanced visibility.
- Dual PTT Buttons: For flexible transmission control.
- Tri-Power Output: High/Middle/Low power settings.
- Voice Scrambler: Enhances communication privacy.
- AM/FM RX Modulation: Supports both AM and FM reception.

2. Safety & General Information
Please observe the following safety guidelines to prevent injury or damage to the device.
General Precautions:
- Do not dispose of the product in normal waste bins; take it to specialized waste disposal centers for recycling.
- Read the entire instruction manual for proper understanding of all functions.
- Keep packaging materials (plastic bags, etc.) out of reach of children to prevent suffocation.
- Do not expose the equipment or battery charger directly to water, prolonged sunlight, or heat sources.
- Avoid humidity condensation. If condensation occurs, clean with a dry cloth and allow to dry completely before use.
- Do not place anything on the transceiver that could spill liquids onto it.
- If the transceiver causes interference with other electronic equipment, move it away from the affected apparatus.
- Do not use this transceiver in the vicinity of medical equipment as it may cause interference.
- Turn off the equipment in areas where its use is restricted or prohibited (e.g., areas with explosion hazards, on board aircraft, airports).
- Do not operate this transceiver while driving a vehicle; use hands-free systems and respect traffic regulations.
- Clean the equipment and/or battery charger with an antistatic or humid cloth. Do not use harsh chemicals, detergents, alcohol, or solvents.
- Do not use incompatible accessories, as this may limit operation or damage the transceiver, voiding the warranty.
- Risk of explosion if the battery pack is replaced with an incompatible one.
Compliance with RF Exposure Standards:
This two-way radio uses electromagnetic energy in the radio frequency (RF) spectrum. It is designed, manufactured, and tested to meet government-established RF exposure levels. To ensure compliance with established RF exposure limits:
- Normal Position: Hold the transmitter approximately 25 mm from your face and speak in a normal voice, with the antenna pointed up and away.
- Body-Worn Operation: This device has been tested and meets FCC/ISED RF exposure guidelines when used with accessories supplied or designated for this product. Use of other accessories may not ensure compliance.
- Use only the supplied antenna. Unauthorized antennas, modifications, or attachments could damage the transmitter and may violate FCC regulations.
For more information on RF energy exposure, refer to http://www.who.int/en/.
Radio License:
Governments classify radios, and most walkie-talkies require a local government license for operation. Please contact your local government radio management department for detailed classification and usage regulations. The RT-920 is CE and FCC certified.

3. Getting to Know the Device
Familiarize yourself with the various parts of your RT-920 radio:

Device Layout:
- Antenna: For signal transmission and reception.
- Power Knob: Controls power ON/OFF and volume.
- Indicator Light: Shows device status (e.g., transmitting, receiving).
- Screen: Full-color display for information.
- Microphone Jack: For external microphone.
- Headphone Jack: For external headphones.
- PTT Button: Push-to-Talk button for transmission.
- PF2/PF3 Buttons: Programmable function keys.
- Numeric Keypad: For frequency input and menu navigation.
- Type-C Charger Port: For direct charging.
- Speaker: For audio output.
LCD Display Icons:
| Icon | Description |
|---|---|
| CT | Analog Sub-audio Tone Indicator (transmitting) |
| DCS | Digital Sub-audio Tone Indicator (transmitting) |
| H/M/L | High/Medium/Low Power Indicator |
| N/W | Narrowband/Wideband Mode Indicator |
| +/- | Frequency Mode (+/- Frequency Offset) |
| R | Frequency/Channel Mode Inverted Frequency |
| T | Simplex Mode |
| SC | SC (Encryption) Indicator |
| AM | AM Modulation Indicator |
| SCR | Scrambler Function Active |
| VOX | Voice-Operated Transmission (VOX) Enabled |
| DW | Dual Standby Active |
| MO | Monitor Function Enabled |
| Side Tone Enabled (DTMF) | |
| Keypad Lock | |
| RSSI | Signal Strength Indicator |
| A/B Band | A or B Band Active |
| VOL | Transmit Audio Volume |
| Battery Status | Remaining battery power indicator |
4. Specifications
| Feature | Specification |
|---|---|
| Brand Name | radtel |
| Model Number | RT-920 |
| Walkie Talkie Type | Portable |
| Output Power (W) | 5W-10W |
| Battery Capacity (mAh) | 2200mAh |
| Waterproof / Water-Resistant | No |
| Battery Included | Yes |
| Storage Channel | 64*15 ZONE |
| Frequency Range | 108-136MHz (RX), 2.3-30MHz (SW RX), 27MHz (CB RX), 400-520MHz, 136-174MHz, 520-1710KHz (MW RX), 153-279KHz (LW RX) |
| Dimensions | 130*57*36mm |
| Display | Yes |
| Maximum Range | 5km-10km |
| Origin | Mainland China |
| Certification | CE, FCC |
| Air Band | Yes, 108-136Mhz RX |
| Bluetooth Programming | Yes |
| Shortwave RX | LSB/USB/CW/AM/FM |
| Noise Reduce | Yes |


5. Initial Setup
Before using your RT-920 radio, please follow these steps for initial setup:
5.1. Unpacking and Inspection
Carefully unpack all items and inspect for any damage. If any items are missing or damaged, contact your retailer. The package should include:
- 1x RT-920 Radio
- 1x High gain UHF/VHF antenna (21.5cm)
- 1x 2200mAh Battery
- 1x Type-C charger cable
- 1x AC adapter with USB port
- 1x Desktop Charger with Type-C port
- 1x Belt clip
- 1x English Manual

5.2. Attaching the Antenna
Screw the provided high-gain UHF/VHF antenna clockwise onto the antenna connector on top of the radio until it is finger-tight. Do not overtighten.
5.3. Installing the Battery
Align the 2200mAh battery with the battery compartment on the back of the radio. Press down firmly until it clicks into place. To remove, slide the battery release latch and pull the battery away.
5.4. Charging the Battery
The RT-920 offers two charging methods:
- Type-C Direct Charging: Connect the Type-C charger cable to the port on the side of the radio and to the AC adapter.
- Desktop Charger: Place the radio into the desktop charging dock. Ensure the charging contacts align. Connect the desktop charger to the AC adapter.
The indicator light will show charging status. A full charge typically takes several hours.

6. Operating Instructions
6.1. Power On/Off and Volume Control
Rotate the Power Knob clockwise to turn the radio ON. Continue rotating to adjust the volume. Rotate counter-clockwise until it clicks to turn the radio OFF.
6.2. Main Frequency Band Selection
On the standby screen, short press the [A/B] key to select the main frequency band. The larger display indicates the currently active band.
6.3. PTT Function
Press the PTT button to transmit. If operating on the A band, it transmits on the A band frequency. If operating on the B band, it transmits on the B band frequency.
6.4. Channel Mode and Frequency Mode Switch
Short press the [VFO/MR] key to switch between channel mode and frequency mode.
6.5. AM Air Band Mode
In frequency mode, directly input an air band frequency (108 MHz to 136 MHz). The radio will automatically enter AM reception mode. This mode is primarily for receiving AM modulated signals.

6.6. Scanning Mode
Scanning can be initiated by assigning the function to PF2/PF3 keys or by long pressing button 1. The radio supports three scanning modes:
- Time Operation Mode (TO): Stops scanning for 5 seconds upon signal detection, then resumes.
- Carrier Operation Mode (CO): Stops scanning until the signal disappears, with a 2-second delay before resuming.
- Search Operation Mode (SE): Exits scan and stays on the detected frequency upon signal detection.
6.7. Commercial FM Radio Broadcast Reception
Long press button 0 to turn on the FM radio. Use UP/DOWN keys or the channel knob to adjust frequency. Press OK to switch between 65-76 MHz and 76-108 MHz bands. Long press button 0 again to turn off.
6.8. Frequency Sweep Function / Copy Frequency
This function helps find frequencies and sub-tones of nearby radios. Assign SEARCH to PF2/PF3 buttons. Press the assigned button until "SEARCH/SEEK..." appears. Press OK to select the frequency band. The radio will then seek sub-tone CTCSS/DCS. You can save the frequency to a channel via the MENU key.

6.9. Weather Forecast NOAA Function
Assign NOAA to a PF button. Press the designated side key to activate this function. The radio has 10 built-in fixed frequencies. Use UP/DOWN keys to select the desired frequency. This function is available only in countries supporting NOAA channels.

6.10. DTMF Encode Sending
Press and hold the PTT button while entering numeric keys (0-9, MENU, UP, DOWN, EXIT, *, #) to transmit DTMF codes. To edit DTMF codes, short press the [#] button in standby mode.
6.11. PTT-ID Function
Transmit identity codes or call codes via DTMF. There are 15 sets of call codes configurable via programming software. Transmission methods include: Send on Press, Send on Release, or Send Both.
6.12. Shortwave Interface and Menu Functions
Press and hold [0] to enter the shortwave interface. Briefly press [*] to switch between STEP/BW/LAN/BFO. Press [MENU] to select modulation (FM, AM, LSB/USB/CW) and [#] to search frequency.
| Menu | Second Menu | Third Level Menu |
|---|---|---|
| Modulation | FM | FM MEMCH (1-15) |
| AM | AM MEMCH (1-15), Work Band (LW, MW, SW), Frequency Step (1K, 10K, 100K), LNA, AGC | |
| LSB/USB/CW | SSB MEMCH (1-15), Frequency Step (1K-1000K), Bandwidth (0.5K-4.0K), LNA, AGC, BFO |
6.13. Menu Function List (Advanced Settings)
The RT-920 offers a comprehensive menu for advanced configuration. Use the [OK/MENU] key to enter the menu, UP/DOWN keys to navigate, and [EXIT] to return to normal operation.
| No. | Menu | Second Menu | Setting |
|---|---|---|---|
| 0 | SQL | 0-9 | Adjust squelch level (0=off, 9=highest) |
| 1 | STEP | 2.5K-50.0K | Set frequency step in VFO mode |
| 2 | TXP | High/Middle/Low | Transmit power selection |
| 3 | SAVE | OFF/Normal/Super/Deep | Power save mode (ratio of sleep cycles to awake cycles) |
| 4 | VOX | OFF/1-9 | Activate VOX function (level 1=most sensitive) |
| 5 | W/N | WIDE/NARROW | Wideband (25KHz) / Narrowband (12.5KHz) |
| 6 | ABR | ON/5sec-3min | Backlight always ON or auto switch off time |
| 7 | TDR | OFF/ON | Dual frequency standby |
| 8 | PROMPT | OFF/ON | Operate beep ON/OFF |
| 9 | TOT | 15S-75S | Time out timer for transmit |
| 10 | ZONE | ZONE 1-15 | Operation to change ZONE |
| 11 | MEMCH | CH-001-064 | Create new channels |
| 12 | DELCH | CH-001-064 | Delete a stored channel |
| 13 | R-CTCSS | None/67.0HZ-254.1HZ | Receive Standard CTCSS or input non-standard tone |
| 14 | R-DCS | None/D023N-D7541 | Receive Standard DCS or input non-standard tone |
| 15 | T-CTCSS | None/67.0Hz-254.1Hz | Transmit Standard CTCSS or input non-standard tone |
| 16 | T-DCS | None/D023N-D7541 | Transmit Standard DCS or input non-standard tone |
| 17 | VOICEPRI | OFF/Encryption 1-3 | Subtone encryption settings |
| 18 | CH-NAME | Channel Name | Input channel name (press # to switch input method) |
| 19 | ROGER | Disable/BEEP/TONE1200 | End-of-transmission tone or frog sound |
| 20 | VOICE | OFF/ON | Voice prompts ON/OFF |
| 21 | LANGUAGE | ENGLISH/русский | Voice guide language |
| 22 | BCL | OFF/ON | Busy channel lockout |
| 23 | SC-REV | TO/CO/SE | Scan resume mode (Time, Carrier, Search) |
| 24 | PF2 | OFF/SPECTRUM/RADIO/SOS/TXPOWER/SCAN/SEARCH/NOAA/PTTB | Assign shortcut function to PF2 (short press) |
| 25 | PF2 LONG PRESS | RADIO/TXPOWER/SCAN/SEARCH/NOAA | Assign shortcut function to PF2 (long press) |
| 26 | PF3 | OFF/SPECTRUM/RADIO/SOS/TXPOWER/SCAN/SEARCH/NOAA/PTTB | Assign shortcut function to PF3 (short press) |
| 27 | OFFSET | 0 | Frequency difference between TX and RX |
| 28 | SFT-D | OFF/+/– | Repeater shift direction |
| 29 | ON MSG | LOGO/VOLTAGE | Power on display (Logo or Voltage) |
| 30 | S-CODE | OFF/1-15 | DTMF Signal codes |
| 31 | DTMF CODE | OFF/BOT/EOT/BOTH | DTMF code transmission method |
| 32 | DTMFST | ANI-ST/DT+ANI | DTMF auto sending code with/without sound |
| 33 | AUTOLOCK | OFF/5S-15S | Keypad auto-lock time |
| 34 | SCAN ADD | ADD/Delete | Add or delete channels from scan list |
| 35 | TONE | 1000Hz-2100Hz | Burst tone frequency |
| 36 | PTT-LT | 0-1000Ms | Delay time before automatic DTMF transmitting |
| 37 | MENU EXIT TIME | 5-60sec | Delay time for exiting menu due to no operation |
| 38 | VOX DELAY | 0.5sec-2.0sec | VOX delay time |
| 39 | RP-STE | OFF/100ms-1000ms | Squelch tail noise eliminate for repeater communication |
| 40 | RPT-RL | OFF/100ms-1000ms | Delay the tail tone of repeater |
| 41 | MDF-A | NAME/FREQ/CH | A Band display mode (Name, Frequency, Channel) |
| 42 | MDF-B | NAME/FREQ/CH | B Band display mode (Name, Frequency, Channel) |
| 43 | TX-A/B | OFF/A/B | Transmit in Main Band, A Band, or B Band in dual standby |
| 44 | STE | OFF/ON | Squelch tail noise eliminate for direct communication |
| 45 | AL-MOD | ON SITE/SEND SOUND/SEND CODE | Field alarm, alarm sound, or alarm tone |
| 46 | SCRAMBLE | OFF/ON | Voice scrambler function |
| 47 | NOISE REDUCTION | OFF/ON | Noise Reduction/Cancellation function |
| 48 | BLUETOOTH | OFF/ON | Bluetooth connect with mobile app (RT-900 bluetooth version only) |
| 49 | RESET | VFO/ALL | Menu initialization (VFO or All settings) |
| 50 | RX Modulation | AM/FM | Switch between AM or FM modulation |
| 51 | VERSION | Firmware/Hardware | Show firmware or hardware version number |
7. Bluetooth App Programming
The Radtel RT-920 supports programming via a dedicated mobile application, compatible with both iOS and Android devices. This allows for easy management and customization of radio settings.
7.1. Downloading the App
Scan the QR codes provided in the manual or on the device packaging to download the official programming app from the App Store (iOS) or Google Play Store (Android).

7.2. Connecting and Programming
- Ensure Bluetooth is enabled on your mobile device and the RT-920.
- Open the Radtel programming app and follow the on-screen instructions to connect to your radio.
- Once connected, you can access various settings such as channel information, frequency modes, CTCSS/DCS tones, and power levels.
- The app allows you to read current settings from the radio, modify them, and write new configurations back to the radio.

8. Maintenance
8.1. Cleaning
To clean the equipment and/or the battery charger, ensure they are OFF. Use an antistatic cloth (preferably) or a humid (not wet) cloth. Do not spray any liquid directly onto the transceiver, battery pack, or charger. Avoid using polish, detergents, alcohol, or solvents for cleaning.
8.2. Battery Care
- Always use the original 2200mAh battery and charger provided.
- Do not expose the battery to extreme temperatures or direct sunlight for extended periods.
- If the battery is not used for a long time, store it in a cool, dry place at approximately 50% charge.
- Replace the battery if its performance significantly degrades.
9. Troubleshooting
This section addresses common issues you might encounter with your RT-920 radio.
Common Issues and Solutions:
- Radio not turning on: Ensure the battery is properly installed and charged. Check the power knob.
- No audio / Poor audio quality: Adjust the volume knob. Check squelch settings (Menu 0, SQL). Ensure the antenna is securely attached.
- Cannot transmit: Check if the PTT button is functioning. Verify that the frequency is within the allowed transmit range and that the battery has sufficient charge.
- Display appears crooked: Some users have reported slightly misaligned displays. This can often be fixed by carefully opening the front panel (if comfortable doing so) and realigning the screen.
- Firmware issues (e.g., mode jumping, scanning display): Ensure you have the latest firmware version. Firmware updates are available for free. If issues persist, try resetting the radio to factory defaults (Menu 49, RESET).
- Stiff buttons: This is a known characteristic for some units. Continued use may soften them slightly.
- Poor HF reception: For optimal HF reception, an external antenna is recommended. You may also need to fine-tune the frequency slightly using the BFO setting in the shortwave menu.
10. User Tips
- Super Mode: To enable all frequency bands and features, press PTT + 8 and power on. To return to normal mode with limited frequency range, press PTT + EXIT and power on.
- Clear Audio: The aircraft band, 2m, and 70cm bands offer very clear audio and great reception.
- External Antenna for HF: For enhanced HF/shortwave reception, consider using an appropriate external antenna.
- Software Programming: Utilize the Bluetooth app or Chirp software (with the correct plugin module) for easier programming and channel management.
- Menu Shortcuts: Accessing the menu is made easier with shortcuts by long-pressing certain buttons. Refer to the 'Shortcut Keys combination' table in Section 3.
11. Frequently Asked Questions (FAQ)
- Q: Does the radio receive air band?
- A: Yes, the Radtel RT-920 receives aviation AM signals in the frequency range of 108-136MHz.
- Q: Does it have a spectrum analyzer?
- A: Yes, the RT-920 features an integrated spectrum analyzer for real-time signal analysis.
- Q: What kind of PTT plug does it use?
- A: The manual does not specify an external PTT plug type, but the device itself features dual PTT buttons for transmission.
12. Warranty & Support
Xiamen Radtel Electronics Co., Ltd. warrants this product against defects in materials and workmanship under normal use for a specified period from the date of purchase. Please retain your proof of purchase for warranty claims.
For technical support, troubleshooting assistance, or warranty inquiries, please contact your retailer or Radtel customer service. Equipment internal manipulation, alteration, or unauthorized modifications will invalidate the warranty.
Manufacturer: XIAMEN RADTEL ELECTRONICS CO., LTD
Address: 502, No.1, Jinyi Wuli, Huli, Xiamen, Fujian, China 361004
Email: support@radtel.com
For the full PDF user manual, please refer to the official document: Radtel RT-920 User Manual (PDF)
13. Certifications
The Radtel RT-920 complies with the following certifications:
- CE Marking: Indicates compliance with RED Directive 2014/53/EU, ROHS Directive 2011/65/EU, and WEEE Directive 2012/19/EU.
- FCC: Complies with Part 15 of the FCC Rules for digital devices.