1. Introduction
Thank you for choosing the VIKEFON K06 TWS Bluetooth 5.4 Earphones. These true wireless stereo (TWS) earbuds are designed to provide a comfortable, high-quality audio experience with advanced features like touch control, HiFi sound, HD calls, and noise reduction. This manual will guide you through the setup, operation, and maintenance of your new earphones.
2. Package Contents
Please check the package for the following items:
- K06 TWS Earphones (Left and Right)
- Charging Case
- User Manual (this document)
3. Product Overview
The K06 earphones feature a compact design with an LED display on the charging case for battery status. They support master-slave switchover, allowing individual use of either earbud.
Figure 3.1: K06 TWS Earphones and Charging Case (various colors)
Figure 3.2: Master-Slave Switchover Feature
4. Specifications
| Feature | Specification |
|---|---|
| Product Name | True Wireless Bluetooth Headphones |
| Model | K06 |
| Brand | VIKEFON |
| Bluetooth Version | 5.4 |
| Supported Protocols | HFP/A2DP/HSP/AVRCP |
| Earphone Type | Semi-in-ear, TWS |
| Music/Call Duration | Up to 6 hours (5 hours typical) |
| Charging Time | Approx. 1.5 hours (30 mins for 50% full) |
| Earbud Battery Capacity | 30mAh |
| Bluetooth Distance | Up to 15 meters (10m-20m range) |
| Driver Diameter | 13mm |
| Impedance Range | Up to 32 Ω |
| Vocalism Principle | Dynamic |
| Features | Touch Control, HiFi Sound, HD Call, Noise Reduction, LED display, With Microphone, Volume Control, Control Button, Sound Isolating |
| Material | PC, ABS |
| Weight | 131g (approximate, likely for case + earbuds) |
Figure 4.1: Detailed Product Parameters
Figure 4.2: 13mm Large Diaphragm and Three-Frequency Equalization
5. Setup
5.1 Charging the Earphones and Case
Before first use, fully charge the earphones and the charging case. Place the earbuds into the charging case. The LED display on the case will show the battery percentage. Connect the charging case to a power source using a Type-C cable (not included).
- Charging Time: Approximately 1.5 hours for a full charge.
- Quick Charge: 30 minutes of charging can provide up to 50% battery.
- The charging case provides additional charges for the earbuds, extending their usage time.
Figure 5.1: Charging and Battery Life Information
5.2 Pairing with Your Device
- Power On: Open the charging case. The earphones will automatically power on and enter pairing mode.
- Activate Bluetooth: On your smartphone or other Bluetooth-enabled device, go to the Bluetooth settings and turn on Bluetooth.
- Search for Devices: Look for "K06" in the list of available devices.
- Connect: Select "K06" to pair. Once connected, you will hear a confirmation tone, and the earphones will be ready for use.
- Single Earbud Use: The K06 supports master-slave switchover, meaning either earbud can be used independently. Simply take one earbud out of the case, and it will connect to your device.
6. Operating Instructions
The K06 earphones feature intuitive touch controls for various functions:
Figure 6.1: Touch Control Functions
- Play/Pause: Click either earbud once.
- Answer/Hang Up Call: Tap either earbud once.
- Switch Songs (Next/Previous): Press and hold either earbud for two seconds. (Specific earbud for next/previous not detailed, typically left for previous, right for next).
- Wake Up Voice Assistant: Tap the right earbud three times.
- Volume Adjustment: Double-click the left earbud to decrease volume, double-click the right earbud to increase volume.
- Return Call: Tap the left earbud three times.
7. Maintenance
- Cleaning: Regularly clean the earbuds and charging case with a soft, dry cloth. Avoid using liquids or abrasive cleaners.
- Storage: When not in use, store the earphones in their charging case to protect them from dust and damage.
- Battery Care: To prolong battery life, avoid fully discharging the earphones frequently. Charge them regularly, even if not in constant use.
- Avoid Extreme Conditions: Do not expose the earphones to extreme temperatures, humidity, or direct sunlight.
8. Troubleshooting
- Earphones not pairing:
- Ensure both earphones are charged.
- Turn off Bluetooth on your device, then turn it back on.
- Forget/delete "K06" from your device's Bluetooth list and try pairing again.
- Place both earbuds back in the charging case, close the lid, wait a few seconds, then open to re-initiate pairing mode.
- Only one earbud working:
- Ensure both earbuds are charged.
- Place both earbuds back in the charging case, close the lid, then open it again. They should re-sync automatically.
- If the issue persists, try resetting the earphones (refer to manufacturer's specific reset instructions if available, otherwise, re-pair from scratch).
- No sound:
- Check the volume level on both your device and the earphones.
- Ensure the earphones are properly connected to your device.
- Try playing audio from a different application or source.
- Charging case not charging:
- Ensure the Type-C charging cable is securely connected to both the case and the power source.
- Try a different charging cable or power adapter.
9. User Tips
- Low Latency for Gaming/Video: The K06 earphones are designed with low sound delay, ensuring audio and video are synced for an immersive experience, especially useful for gaming and watching videos.
- Comfortable Fit: The ergonomic semi-in-ear design is intended for comfortable wear over extended periods. Experiment with the fit to find the most secure and comfortable position for your ears.
- LED Display: Utilize the LED display on the charging case to quickly check the battery level of the case and individual earbuds, helping you manage charging effectively.
Figure 9.1: Low Sound Delay for Synced Audio/Video
Figure 9.2: Comfortable and Mini Design
10. Warranty and Support
Your VIKEFON K06 TWS Bluetooth 5.4 Earphones come with a standard manufacturer's warranty. Please retain your proof of purchase for any warranty claims. For technical support or further assistance, please contact the seller or refer to the product listing page for contact information.
