1. Introduction
The JIKONG Smart Active Balancing Battery Management System (BMS) is a sophisticated management system designed for large-capacity series lithium battery packs. It integrates essential functions such as voltage acquisition, high-current active balancing, overcharge and over-discharge protection, over-temperature protection, coulomb metering, Bluetooth communication, and optional GPS and RS485/CAN interfaces. This BMS is suitable for various battery chemistries, including LiFePO4, ternary lithium, and lithium titanate batteries.
The protection board utilizes energy transfer active balancing technology, capable of achieving a continuous 1A/2A balance current. This high-current active equalization significantly enhances battery consistency, extends battery lifespan, and delays battery aging. The system is compact, easy to operate, and highly functional, making it ideal for applications in small sightseeing vehicles, mobility scooters, shared cars, high-power energy storage, base station backup power supplies, and solar power stations.
2. Key Features
- Active Balancing: 1A or 2A active equalizing current for enhanced battery consistency.
- Battery Compatibility: Supports 3-8S Li-ion, 4-8S LiFePO4, and 6-8S LTO battery strings.
- Communication: Bluetooth (BT) APP for Android/iOS/HarmonyOS, optional RS485 and CAN communication.
- Display Interface: Yes, supports external display for real-time data.
- Protection Functions: Overcharge, over-discharge, overcurrent (charge/discharge), over-temperature, low-temperature, and short-circuit protection.
- Additional Functions: Heating function (optional), alarm function (optional), battery parallel function (optional), ACC detection function (optional), GPS communication (optional), intelligent sleep mode, emergency switch.
- High Precision: Voltage acquisition accuracy of ±3mV, high precision current acquisition.
- Robust Design: Aluminum alloy shell for reduced environmental damage to electronic components.
3. Product Specifications
The following table details the technical specifications for the JIKONG BMS. Please note that data tolerance range is ±2mm.
| Technical Index | Value | Unit |
|---|---|---|
| Supply Voltage | 7.5-36 | V |
| Operating Power Consumption | <900 | mW |
| Operating Temperature | -30 to 70 | °C |
| Maximum Number of Collection Strings | 8 | Strings |
| Maximum Balancing Current | 2 | A |
| Maximum Charging Current | 200 | A |
| Maximum Discharge Current | 200 | A |
| Maximum Instantaneous Current | 400 | A |
| Maximum Internal Loop Resistance | 0.35 | mΩ |
| Protective Plate Size (L×W×H) | 152.25×127.26×15.6 | mm |
| Finished Weight | 424 | g |
| Certification | CE, FCC, RoHS | - |
| Mobile Bluetooth Function | YES (Android / iOS / HarmonyOS) | - |
| Heating Function | Support Customer Customization | - |
| RS485 and CAN Communication | Support Customer Customization | - |
For detailed default parameter values (e.g., voltage thresholds, delay times), please refer to the official user manual PDF.


4. Installation and Wiring
The JK-BxA8S-20P series protection board is suitable for 3-8 series lithium battery packs. The specific wiring method varies depending on the number of cells in the battery pack. Always ensure all cables are connected correctly before powering on the BMS.
4.1. Packing List
Before installation, verify that all components are present:
- BMS x 1
- Sampling line B x 1 (long 70cm)
- Sampling line B x 1 (long 70cm)
- NTC x 1 (long 40cm)
- Switch x 1 (long 50cm)
- Packaging box

4.2. Wiring Instructions
- Connect all balance cables to the battery cells, ensuring correct polarity and sequence (B-, B1, B2... B+).
- Insert the balance cable connector into the BMS.
- Connect the B-line (total negative electrode) and P-line (total positive electrode) to the battery.
- Connect the load and charger to the P- and B- terminals as shown in the diagrams.
Important: Ensure the balance cable connection is correct and the P- and B- lines are properly connected. Securely fix the protection board to the battery pack to prevent abnormal operation or damage.


4.3. Interface Definitions
The BMS features various interfaces for communication, display, and optional functions. Refer to the table below for pin definitions.
| Connector Type | Interface Name | Pin No. | Pin Name | Description |
|---|---|---|---|---|
| XH-10AW-2.54 | Balance & Acquisition Interface | 1 | B- | Total negative battery |
| 2 | B1 | 1st battery positive | ||
| ... | ... | ... | ||
| 9 | B8 | 8th battery positive | ||
| 10 | B+ | Protection board power supply, connected to the battery | ||
| A1254WF-2A (Optional) | Buzzer Interface | 1 | GND | Buzzer power negative |
| 2 | VCC | Buzzer power supply positive | ||
| A1254WF-4A (Optional) | Communication Interface | 1 | CAN_L | CAN signal negative terminal |
| 2 | CAN_H | CAN signal positive terminal | ||
| 3 | RS485_A | RS485 signal positive terminal | ||
| 4 | RS485_B | Negative terminal of RS485 signal | ||
| 1.25T-4PWT | GPS Interface | 1 | GND | Power/signal ground |
| HY2.0-4P | 4 External Optional Temperature Interface | 1 | T5A | Fifth temperature sensor pin A |
| 2 | T5B | Fifth temperature sensor pin B | ||
| 3 | T4A | Fourth temperature sensor pin A | ||
| 4 | T4B | Fourth temperature sensor pin B | ||
| HY2.0-4P | Temperature Interface | 1 | T2A | Second temperature sensor pin A |
| 2 | T2B | Second temperature sensor pin B | ||
| 3 | T1A | First temperature sensor pin A | ||
| 4 | T1B | First temperature sensor pin B | ||
| A1254WF-6A | Display Interface | 1 | VCC | Display power output |
| 2 | A | The display RS485 signal is positive | ||
| 3 | B | Display RS485 signal negative | ||
| 4 | GND | Negative terminal | ||
| 5 | K+ | Activate the positive signal | ||
| 6 | K- | Activation signal negative electrode | ||
| A1254WF-3A (Optional) | Parallel Interface | 1 | P-status | Parallel module status signal |
| A1254WF-5A (Optional) | ACC Interface | 1 | ACC+ | ACC Positive |
| 2 | ACC- | ACC Negative | ||
| 3 | NC | Empty (No connection) | ||
| 16AWG-Orange-15CM (Heating wire) | Heating Wire | 1 | HT- | Heater element negative electrode |


5. Operation
5.1. Device Activation
Before starting the protection board, double-check that the balance cable is properly connected and that the P- and B- lines are correctly wired. Ensure the protection board is securely fixed to the battery core. Once confirmed, power on the protection board. The BMS is designed for charging activation mode (charger voltage 2V higher than battery voltage). After battery assembly, connect the charger to activate the protection board.
Alternatively, the BMS supports key activation and display activation. Users with an optional display screen and button can activate the device by inserting the cable into the display interface and pressing the button.
5.2. APP Installation and Usage
The JIKONG BMS features a mobile APP compatible with Android, iOS, and HarmonyOS. The APP allows users to monitor battery status, modify parameters, and control charge/discharge switches via Bluetooth.
- APP Installation: Scan the QR code below to download the matching mobile APP. Android Version 7 or higher is required.
- Bluetooth Connection: Connect the APP to the BMS via Bluetooth. The Bluetooth status indicator on the BMS will be steady when connected and blinking when disconnected.
- Monitoring: View real-time battery data such as voltage, current, temperature, and cycle count.
- Parameter Settings: Adjust various parameters like equalization trigger voltage, protection thresholds, and delay times.


5.3. Active Equalization
The BMS employs active equalization to transfer energy from high-voltage cells to low-voltage cells. Before using this function, set basic battery parameters in the APP, including cell count, battery capacity, and equalization differential pressure (default 1A/2A). The equalization current can be adjusted based on battery capacity, not exceeding 0.2C. If not needed, the equalization switch can be turned off in the APP's BMS control page.

5.4. Heating Function (Optional)
The optional heating function uses resistance heaters or heating films to warm the battery in low temperatures, preventing performance degradation. The heating current is 20A. Users can switch this function on/off via the APP and should consider adding a temperature control switch (45-65°C normally closed) in the heating circuit for secondary protection.
5.5. Communication Functions (Optional)
The BMS supports optional CAN and RS485 communication. Users can select the desired communication mode (CAN or RS485) via the APP's BMS control page. Address and communication protocols can be configured based on specific requirements and scenarios. Refer to the JIKONG Protection Board communication protocol document for details.

6. Protection Functions
The JIKONG BMS provides comprehensive protection for your battery pack:
- Overcharge Protection: Prevents cell damage from overcharging. Users can set single overcharge protection and recovery voltages via the APP.
- Over-discharge Protection: Safeguards cells from deep discharge. Users can set undervoltage protection, recovery voltages, and automatic shutdown voltage via the APP.
- Overcurrent Protection (Charge/Discharge): Protects against excessive current during charging and discharging. Continuous current, delay times, and release times are configurable via the APP.
- Over-temperature Protection: Prevents damage from high temperatures. Charge and discharge over-temperature protection and recovery temperatures are configurable.
- Low-temperature Protection: Protects against damage from low temperatures during charging. Charge low-temperature protection and recovery temperatures are configurable.
- Short Circuit Protection: Automatically triggers protection in case of a short circuit. Short circuit delay and recovery times can be adjusted via the APP.
- Emergency Switch: In case of over-temperature, over-discharge, overcharge, or cell imbalance issues, activating the emergency switch via the APP will enable charge and discharge for 30 minutes, providing emergency use time.
- Intelligent Sleep: This function allows the BMS to enter a low-power standby mode (when charge/discharge current is less than 1A for 26 consecutive hours) to reduce self-consumption. It can be activated by a button or charger.
- Alarm Function (Optional): If enabled, the BMS will alert externally when security risks such as over-temperature, overcharge, or over-discharge are detected.
7. Maintenance
To ensure optimal performance and longevity of your JIKONG BMS, consider the following:
- Regular Monitoring: Periodically check battery status and parameters via the mobile APP or external display.
- Firmware Updates: Keep the BMS firmware updated to the latest version for improved features and bug fixes (check manufacturer's website or APP for updates).
- Cleanliness: Ensure the BMS and its connections are free from dust and moisture.
- Connection Integrity: Regularly inspect all wiring and connectors for secure connections and signs of wear or corrosion.
- Temperature Management: If operating in extreme cold, utilize the optional heating function to protect battery cells.
8. Troubleshooting
This section provides guidance for common issues. For complex problems, refer to the detailed user manual PDF or contact JIKONG technical support.
- BMS Not Activating: Ensure all balance cables are correctly connected and the P- and B- lines are properly wired to the battery. Activate the BMS by connecting a charger (voltage 2V higher than battery) or by pressing the activation button if an optional display is installed.
- Balancing Not Occurring: Verify that the active equalization function is enabled in the APP and that the equalization differential pressure is set appropriately. Check if the battery capacity setting is correct.
- Protection Triggered Frequently: Review the protection parameter settings (overcharge, over-discharge, overcurrent, temperature) in the APP. Adjust thresholds and delay times as needed, ensuring they are suitable for your battery type and application. For short-circuit protection, increasing the delay time might resolve issues caused by high peak currents from chargers or loads.
- Communication Issues (Bluetooth/RS485/CAN): Ensure the correct communication mode is selected in the APP. For Bluetooth, check if the BMS is discoverable and within range. For RS485/CAN, verify wiring and protocol settings.
- Heating Function Not Working: Check if the heating function is enabled in the APP. Ensure the heating elements are correctly connected and that any external temperature control switches are functioning properly.
9. User Tips
- Initial Setup: Always perform a thorough check of all wiring, especially balance leads and main power connections (P- and B-), before the initial power-up to prevent damage.
- APP Customization: Take advantage of the mobile APP to fine-tune protection parameters and equalization settings to match your specific battery pack and usage scenario for optimal performance.
- Cold Weather Operation: If using the battery in cold environments, consider enabling the heating function to maintain battery efficiency and prolong its life.
- Monitoring: Regularly check the battery status via the APP to catch any anomalies early.
10. Warranty and Support
For detailed warranty information, technical support, and service inquiries, please refer to the official JIKONG documentation or contact JIKONG customer service. An official user manual PDF is available for download at JIKONG User Manual (PDF).