Eachine E188S

Contents

Eachine E188S AirWolf RC Helicopter User Manual

Model: E188S

Thank you for choosing the Eachine E188S AirWolf RC Helicopter. This manual provides essential information for safe operation, setup, and maintenance of your new helicopter. Please read it thoroughly before use.

1. Safety Information and Warnings

  • Age Restriction: Not suitable for children under 36 months. Recommended age for operation is 14+.
  • Operating Environment: Always operate the helicopter in open outdoor areas with no wind or just a light breeze. Avoid flying near people, animals, buildings, or power lines.
  • Battery Safety: Use only the specified LI-POLY 7.4V (1200mAh) 25C battery. Do not overcharge or over-discharge. Discontinue use if the battery is damaged or swollen.
  • Pre-Flight Check: Always perform a thorough pre-flight check before each flight, ensuring all parts are secure and functioning correctly.
  • Supervision: Younger users should always be supervised by an adult.
  • Emergency Stop: Familiarize yourself with the emergency stop function on the remote control.

2. Package Contents

Please check the contents of your package against the list below:

  • 1 x E188S RC Helicopter
  • 1 x Remote Control
  • 1 x USB Charging Cable
  • 1 x Intelligent Battery (Quantity may vary: 1, 2, or 3 depending on package)
  • 2 x Main Blades
  • 1 x Tail Rotor Blade
  • 1 x Screwdriver
  • 1 x Hex Key
  • 1 x Instruction Manual
  • 1 x Aluminum Box (for storage and transport)
Diagram showing all components included in the Eachine E188S AirWolf RC Helicopter package: Helicopter, Aluminum Box, Intelligent Battery, Main Blades, Remote Control, Hex Key, Screwdriver, USB Charging Cable, Tail Rotor Blade, and Instruction Manual.
Figure 2.1: Package Contents Overview
Detailed image of the Eachine E188S AirWolf RC Helicopter package contents, including the helicopter, remote control, battery, blades, tools, and aluminum case.
Figure 2.2: Detailed View of Included Accessories

3. Specifications

FeatureDescription
ModelE188S
TypeRC Helicopter (1:34 Scale AirWolf Reproduction)
Rotor Diameter375mm
Body Length415mm
Height118mm
Weight310g (including battery)
MaterialMetal, Plastic (High-Strength Composite Material, Carbon Fiber Composite Blades)
Radio Frequency Band2.4GHz
Remote Control DistanceMore than 120 meters (Control Range About 350 meters)
Control Channels9CH (6 channels for flight control)
Controller ModeMODE1, MODE2
BatteryLI-POLY 7.4V (1200mAh) 25C
Charging TimeAbout 60 minutes
Flight TimeAbout 10-12 minutes
MotorsDual Brushless Motor (Main: 2511 1200KV, Tail: 1204 5500KV)
Servos3 x 4.3g Metal Gear Servos
Stabilization System6G Electronic Stabilization System, Flybarless Design
PositioningGPS, Optical Flow Localization, LiDAR TOF Altitude Hold
Flight ModesGPS Stabilization, Lower Vision Flight, Manual Self-Stabilization
Special FunctionsOne-key Return, Low-power Intelligent Return, Out-of-control Return, One-key Landing, Electronic Fence, One-key 8-shaped Route Flight, One-key Circular Flight, One-key Inverted Flight
Aluminum Box Dimensions460mm x 270mm x 155mm
Recommended Age14+ years
Diagram showing the dimensions of the Eachine E188S AirWolf RC Helicopter: 415mm body length and 118mm height.
Figure 3.1: Product Dimensions
Image showing the helicopter dimensions (375mm rotor diameter, 415mm body length, 118mm height) and the aluminum box dimensions (460mm length, 270mm width, 155mm height).
Figure 3.2: Helicopter and Aluminum Box Dimensions
Product Information Sheet table detailing Name, Remote Control Mode, Remote Control Distance, Weight, Product Materials, Suitable Age, Battery, Charging Time, Battery Time, Color, and Accessories for the E188S.
Figure 3.3: Product Information Sheet

4. Setup Guide

4.1. Battery Charging

  1. Connect the intelligent LI-POLY 7.4V (1200mAh) 25C battery to the provided USB Charging Cable.
  2. Plug the USB Charging Cable into a suitable USB power source (e.g., computer, USB wall adapter).
  3. The charging time is approximately 60 minutes. Ensure the battery is fully charged before first use.
  4. The intelligent module battery includes charging protection and low power protection functions.
Image showing the high-rate Lithium Polymer battery with specifications 7.4V 1200mAh 25C, highlighting its high discharge rate and long service life.
Figure 4.1: Intelligent Battery

4.2. Remote Control Preparation

The remote control requires batteries (not included). Install them according to the polarity markings.

4.3. Binding Process (ELRS Receiver Settings)

The ELRS receiver connects to power approximately 3 times to enter binding mode. Refer to the specific remote control's instruction manual for detailed binding procedures, especially if using an open-source protocol remote control like the Jumper T20.

Screenshots of Communication Frequency Setting and Communication Mode Setting for a Jumper T20 open-source protocol remote control, showing channels, packet rate, and receiver settings.
Figure 4.2: ELRS Receiver and Remote Control Settings (Example: Jumper T20)

4.4. Pre-Flight Checks

  • Ensure the helicopter battery is fully charged and securely installed.
  • Ensure the remote control has sufficient battery power.
  • Check that all main blades and the tail rotor blade are securely attached and undamaged.
  • Verify that the flying area is clear of obstacles and people.
  • Power on the remote control first, then the helicopter.

5. Operating Instructions

5.1. Remote Control Overview

The E188S features an 8-channel high-precision remote control with a 2.4GHZ two-way communication protocol. It provides 1024-level operation feel and a high-definition display for real-time feedback.

Diagram of the remote control showing various buttons and joysticks labeled: Intelligent Mode, Manual Mode, Figure 8 Flight, Round Flight, Accelerator/Rudder Joysticks, Power On/Mode Switching, Throttle High/Low, Aircraft Unlock, Aircraft Lock, Optical Flow Mode, GPS Stabilization Mode, Flight Return, Power Switch (Press for 3 seconds to power on), Aileron/Elevation Joystick, One-Button Landing. Below is a diagram of the display screen showing Aircraft Battery, GPS Quality Icon, Return, GPS Quantity, Flight Modes, Remote Control Battery, Accelerating High/Low, Operation Ratio, CH, Speed, Altitude, Distance, Flight Direction, and Remote Control Mode.
Figure 5.1: Remote Control Instructions and Display Screen Introduction

5.2. Basic Flight Functions

The E188S possesses stable, fast, and precise flight attitude:

  • UP / DOWN: Control vertical ascent and descent.
  • FORWARD / BACKWARD: Control horizontal movement.
  • TURN LEFT / TURN RIGHT: Control yaw (rotation around vertical axis).
  • LEFT-SIDE FLYING / RIGHT-SIDE FLYING: Control horizontal movement to the sides.
Diagram illustrating the flight functions of the AirWolf E188S helicopter, showing arrows for UP, DOWN, FORWARD, BACKWARD, LEFT-SIDE FLYING, RIGHT-SIDE FLYING, TURN LEFT, and TURN RIGHT.
Figure 5.2: Flight Functions

5.3. Advanced Flight Techniques & Features

The E188S incorporates several advanced aviation flight techniques:

Icons representing advanced flight techniques: 6 Axis Gyroscope, Optical Flow Positioning, Two Way Transmission, GPS Positioning, Dual Motor, LiDAR TOF Altitude Hold, A Key to Land, Low Electricity Return, Accurate Control, Out of Control Returning, Easy to Maintain, Intelligent Battery.
Figure 5.3: Advanced Aviation Flight Techniques

5.3.1. GPS Flight Control System

Experience new intelligent operations anytime, anywhere. The GPS module, compass module, lower vision module, and air pressure height setting module enable:

  • GPS Positioning: For accurate location tracking.
  • Automatic Hovering: Maintains a stable position.
  • Automatic Return-to-Home: Helicopter returns to its takeoff point.
Image depicting the AirWolf E188S flying over a city with GPS signals, illustrating GPS Flight Control System features like Automatic Hovering and Automatic Return-to-Home.
Figure 5.4: GPS Flight Control System
Diagram showing GPS Satellite Positioning features: Low Battery Return, Loss of Control Return, Straight-Line Return, and One-Button Return.
Figure 5.5: GPS Satellite Positioning Features

5.3.2. Optical Flow + LiDAR TOF Altitude Hold

Breakthrough Altitude Hold Technology using Optical Flow and LiDAR TOF for precise position and balance maintenance. This system provides high precision, fast response, and strong anti-interference capabilities for stable real-time altitude information.

Image showing the AirWolf E188S hovering with blue light waves indicating LiDAR TOF altitude hold technology for precise position and balance maintenance.
Figure 5.6: Optical Flow + LiDAR TOF Altitude Hold
Close-up image of the helicopter's underside, highlighting the LiDAR TOF Altitude Hold sensor and describing its high precision, fast response, and strong anti-interference capabilities.
Figure 5.7: LiDAR TOF Altitude Hold Detail

5.3.3. Special Flight Modes

  • One-key 8-shaped Route Flight: In GPS Mode, flip the switch SWA-5 upwards to record current coordinates and perform horizontal figure-8 flight.
  • One-key Circular Flight: The aircraft executes a circular route command.
  • One-key Inverted Flight Mode: Practice in an open outdoor area with no wind or light breeze. In GPS mode, when flying at an altitude of 10 meters, press the MODE button on the remote control to enter inverted flight mode. The throttle operation remains the same as normal flight. Move the aileron stick or elevator stick quickly and then quickly return to center.
Diagram showing the helicopter performing a horizontal figure-8 flight pattern in GPS mode, controlled by a switch on the remote control.
Figure 5.8: Horizontal Figure-8 Flight
Instructions for one-key inverted flight mode, showing the helicopter in inverted positions and detailing how to activate it using the remote control's MODE button and joystick movements.
Figure 5.9: One-Key Inverted Flight Mode

5.3.4. ELRS Receiver Channel Switch Settings

The following table outlines the channel switch settings for various flight modes:

CHFunction
CH1Ail ±100 Left/Right Roll
CH2Ele ±100 Forward/Backward
CH3Thr ±100 Throttle
CH4Rud ±100 Steering
CH5SD Three-position switch (Flight mode switch) -100: Optical Flow Mode, 0: GPS Mode, +100: Return-to-Home Mode
CH6SA Two-position switch (Emergency Stop Switch) -100: Control Allowed, 100: Emergency Stop
CH7SC Three-position switch (Auto Route Switch) -100: In GPS mode, switch from 0 to -100, the aircraft executes circular route command. 0: In GPS mode, route command off. +100: In GPS mode, switch from 0 to +100, the aircraft executes figure-eight route command.
CH8SB Two-position switch (Manual Mode Switch) -100: Auto Mode (flight mode determined by CH5 three-position switch position). -0 or +100: Altitude Hold Mode (Optical Flow and GPS off)
CH9SI Button switch (One-key Inverted Flight) - In GPS mode, switch from -100 to +100 to activate the one-key inverted flight function of the aircraft.

Note: These parameters are based on the Jumper T20 Open-source Communication Protocol Remote Control. For differences in interface and parameters of specific remote controls, please refer to your remote control's instruction manual.

Table showing ELRS Receiver Channel Switch Settings Corresponding to Flight Modes, detailing functions for CH1 to CH9.
Figure 5.10: ELRS Receiver Channel Switch Settings

6. Maintenance

6.1. General Care

  • Keep the helicopter clean and free from dust and debris. Use a soft, dry cloth for cleaning.
  • Avoid exposing the helicopter to extreme temperatures or moisture.
  • Store the helicopter and remote control in the provided aluminum box when not in use to prevent damage.

6.2. Blade and Motor Inspection

  • The blades are made of nylon + carbon fiber composite materials, offering high strength and toughness. Inspect them regularly for any signs of cracks or damage. Replace immediately if damaged.
  • The brushless motors are designed for durability and can withstand high temperatures (up to 150°C). However, regularly check for any unusual noises or reduced performance.
  • The high-precision CNC rotor head cross plate is optimized for durability. Inspect for any wear or damage.
Image highlighting the carbon fiber composite material used for the blades, emphasizing their high strength, toughness, impact resistance, and non-deformation properties.
Figure 6.1: Carbon Fiber Composite Blades
Image showing the high-precision CNC rotor head crossbar with optimized structure, designed to reduce weight and aircraft damage.
Figure 6.2: High-Precision CNC Rotor Head Crossbar
Detailed images and descriptions of the Tail Motor (1204 5500KV Brushless), Flybarless Design, Fuselage (Hot Runner Injection Molding), High-Precision CNC Rotor Head, and 4.3g Large Digital Servo.
Figure 6.3: Key Component Details

6.3. Battery Maintenance

  • Do not leave batteries charging unattended.
  • Disconnect the battery from the helicopter and remote control when not in use.
  • For long-term storage, charge the battery to approximately 50% capacity.

7. Troubleshooting

If you encounter issues with your Eachine E188S AirWolf RC Helicopter, please refer to the following common troubleshooting steps:

  • Helicopter not responding: Ensure both the helicopter and remote control are powered on and properly bound. Check battery levels for both devices.
  • Unstable flight: Verify that all blades are securely attached and undamaged. Ensure you are flying in an appropriate environment (low wind). Calibrate the gyroscope if available in your remote control settings.
  • Short flight time: Ensure the battery is fully charged. Check for any obstructions to the rotors or motors that might cause excessive power drain.
  • Loss of signal: Ensure you are within the remote control's operating range (more than 120 meters). Avoid areas with strong electromagnetic interference. The helicopter has an 'Out-of-control Return' function for safety.

For more complex issues, consult the official Eachine support resources or contact customer service.

8. User Tips

  • Practice in Beginner Mode: If you are new to RC helicopters, start with the manual self-stabilization mode or optical flow mode to get accustomed to the controls before attempting advanced GPS modes.
  • Monitor Display Screen: Pay attention to the remote control's high-definition display for real-time feedback on aircraft power, flight speed, altitude, distance, and GPS status. This helps in precise control and prevents unexpected issues.
  • Utilize Safety Features: Make use of features like 'One-key Return', 'Low-power Intelligent Return', and 'One-key Landing' to prevent crashes and loss of the helicopter, especially when battery is low or signal is weak.
  • Environmental Awareness: Always choose a spacious, open outdoor area for flying. Even with advanced stabilization, strong winds can affect performance and safety.

9. Warranty and Support

9.1. Returns Policy

This product is eligible for free returns within 90 days of purchase. Please refer to the seller's return policy for detailed terms and conditions.

9.2. Fast Delivery Guarantee

The seller offers a fast delivery guarantee, which includes:

  • $1.00 coupon code if delivery is delayed.
  • Refund if the package is lost.
  • Refund if items are damaged.
  • Refund if no delivery within 20 days.

9.3. Customer Support

For any technical assistance, questions, or concerns regarding your Eachine E188S AirWolf RC Helicopter, please contact the FlashFreight Store customer service. Refer to your purchase documentation for contact details.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.