JIKONG JK-B1A8S10P

Contents

JIKONG Smart BMS User Manual

Model: JK-B1A8S10P

1. Introduction

The JIKONG Smart BMS (Battery Management System) is an intelligent active balance protection board designed for large capacity series lithium battery packs. It offers advanced features to ensure the safety and longevity of your battery system.

This BMS is suitable for 4S to 8S battery configurations, supporting both LiFePO4 and Li-ion battery types. It provides a continuous charge/discharge current of up to 100A and features a powerful 2A active balancing current for optimal cell voltage consistency.

Product Overview: A visual introduction to the JIKONG Smart BMS and its features.

Key Features:

  • Active Balancing: High current active balancing (1A-2A) for lossless equalization, ensuring battery consistency and extending lifespan.
  • Wide Compatibility: Supports 4S-8S Li-ion, LiFePO4, and LTO battery types (depending on model variant).
  • High Current Capacity: Up to 100A continuous charge and discharge current.
  • Comprehensive Protection: Includes overcharge, overdischarge, overcurrent, short circuit, overtemperature, low temperature, and undervoltage protection.
  • Smart Connectivity: Bluetooth APP support for Android/iOS/HarmonyOS for real-time monitoring and parameter adjustment.
  • Multiple Interfaces: Supports RS485, CAN, GPS, NTC, and external display interfaces.
  • Robust Design: Equipped with a high-performance MCU and an aluminum alloy shell for enhanced durability and heat dissipation.
  • Optional Heating Function: For optimal performance in low-temperature environments.
  • Optional Parallel Function: For energy storage battery packs.
  • Optional ACC Detection: For enabling discharge.

2. Safety Information

Please read and understand all safety instructions before installing or operating the JIKONG Smart BMS. Failure to follow these instructions may result in electric shock, fire, serious injury, or property damage.

  • Always wear appropriate personal protective equipment (PPE) when working with batteries.
  • Ensure all connections are correct and secure before applying power. Incorrect wiring can cause damage to the BMS and battery.
  • Do not short-circuit the battery terminals or the BMS.
  • Keep the BMS away from water, moisture, and flammable materials.
  • Do not attempt to disassemble or repair the BMS yourself. Contact qualified personnel for service.
  • Ensure proper ventilation around the battery pack and BMS to prevent overheating.
  • Verify battery voltage and polarity before connecting to the BMS.

3. Product Components and Packing List

The standard package for the JIKONG Smart BMS includes the following items:

Packing List with BMS, cables, and box
Figure 3.1: General view of the JIKONG Smart BMS packing list.
  • BMS x 1
  • Sampling line B x 1 (long 70cm)
  • Sampling line B x 1 (long 70cm)
  • NTC x 1 (long 40cm)
  • Switch x 1 (long 50cm)
  • Packaging box
Detailed Packing List for JIKONG Smart BMS
Figure 3.2: Detailed view of the JIKONG Smart BMS components.

4. Specifications

The JIKONG Smart BMS offers robust performance and a wide range of configurable parameters. Below are the general and default specifications for the JK-BxA8S-20P series.

General Parameters:

ParameterValueUnit
Supply Voltage7.5-36V
Operating Power Consumption<900mW
Operating Temperature-30 to 70°C
Max. Number of Collection Strings8String
Max. Balancing Current1A / 2AA
Max. Charging Current100AA
Max. Discharge Current100AA
Max. Instantaneous Current400A
Max. Internal Loop Resistance0.35mΩ
CertificationCE-
Mobile Bluetooth FunctionYES-
Product Parameters Table
Figure 4.1: Detailed product specifications table.

Dimensions:

The dimensions for the JK-BxA8S-20P series protection board are approximately 152.25mm × 127.26mm × 15.6mm.

JK-B1A8S10P Dimensions Diagram
Figure 4.2: Dimensions of the JK-B1A8S10P model (approx. 87mm x 153.9mm x 17.6mm).
JK-B2A8S20P Dimensions Diagram
Figure 4.3: Dimensions of the JK-B2A8S20P model (approx. 126mm x 153mm x 17.6mm).

5. Setup and Installation

Proper installation and wiring are crucial for the safe and effective operation of your JIKONG Smart BMS. The wiring method varies depending on the number of battery cells (strings).

Wiring Instructions:

Before connecting, ensure all cables are properly identified and the battery pack is securely assembled.

  1. Connect all balance cables to the BMS.
  2. Insert the balance cable into the BMS connector.
  3. Connect the B- line (total negative electrode) and P- line (total positive electrode) to the battery.

Wiring Method for 8-String Cells:

Wiring Diagram for 8-String Cells
Figure 5.1: Wiring diagram for an 8-string battery configuration. Connect the balance wires from 1S to 8S, the total negative (B-) and total positive (P-) terminals. The inverter and charger are connected to the P- and P+ terminals.

Wiring Method for 4-String Cells:

Wiring Diagram for 4-String Cells
Figure 5.2: Wiring diagram for a 4-string battery configuration. Connect the balance wires from 1S to 4S, the total negative (B-) and total positive (P-) terminals. The inverter and charger are connected to the P- and P+ terminals.

Interface Definitions:

The BMS features various interfaces for communication, sensors, and control. Refer to the detailed interface definitions in the official PDF manual for precise pinouts and connections. The PDF manual can be accessed via the link provided in the Warranty/Support section.

BMS Interface Comparison
Figure 5.3: Comparison of interfaces between JK-B2A8S20P and JK-B1A8S10P models, showing RS485, GPS, CAN, Display, Heat, and Sampling ports.
JIKONG Smart Active Balance BMS Overview
Figure 5.4: Overview of JIKONG Smart BMS features including powerful MCU, APP support, RS485/CAN/GPS/Display/NTC/Heat support, multi-terminal interconnection, high current balance, and continuous current.
BMS Internal Architecture Diagram
Figure 5.5: Internal architecture of the BMS, highlighting the MCU, MOS, NTC, sampling lines, and cooling aluminum alloy.

6. Operating Instructions

6.1. APP Installation and Device Activation

To fully utilize your JIKONG Smart BMS, download the mobile APP. The APP allows for real-time monitoring, parameter adjustment, and control of various BMS functions.

  1. APP Installation: Scan the QR code below to download the official JIKONG BMS APP. An Android device with Android 7 or higher is required.
QR Code for JIKONG BMS APP
Figure 6.1: Scan this QR code to download the JIKONG BMS mobile APP.
  1. Device Activation: Before powering on the BMS, double-check all balance cable connections and ensure the P- and B- terminals are correctly connected. Confirm the protection board is securely fixed to the battery cells. Incorrect connections can lead to malfunction or damage. The BMS does not have a power-on switch; it activates in charging mode (charger voltage 2V higher than battery voltage). After battery assembly, connect the charger to activate the BMS. Alternatively, if you have an optional display screen and button, connect them and press the button to activate.

6.2. Parameter Setting

All parameters can be configured via the mobile APP. Refer to the 'Instructions for Setting Protection Board Parameters' in the official PDF manual for detailed guidance. The PDF manual can be accessed via the link provided in the Warranty/Support section.

6.3. Active Balancing

The BMS employs active equalization technology to transfer energy from higher-voltage cells to lower-voltage cells. This process ensures voltage consistency across all cells. You can set the balance trigger voltage difference (mV) in the APP. Active balancing operates automatically when the voltage difference between any two cells exceeds the set value and stops when it falls below the set value. The default balancing current is 1A/2A, which can be adjusted based on your battery capacity (recommended not to exceed 0.2C of battery capacity). If not needed, the balancing function can be turned off in the APP.

Active Balancing Diagram
Figure 6.2: Illustration of active balancing, showing energy transfer between battery cells to achieve voltage equilibrium.

6.4. Protection Functions

The BMS includes several protection mechanisms to safeguard your battery:

  • Overcharge Protection: Prevents cells from being overcharged. Configurable voltage and recovery settings in the APP.
  • Overdischarge Protection: Prevents cells from being overdischarged. Configurable voltage, recovery, and automatic shutdown settings in the APP.
  • Overcurrent Protection (Charge/Discharge): Protects against excessive current during charging and discharging. Configurable current limits and delay times in the APP.
  • Overtemperature Protection (Charge/Discharge): Shuts down charging/discharging if battery temperature exceeds safe limits. Configurable temperature and recovery settings in the APP.
  • Low Temperature Protection (Charge/Discharge): Prevents charging/discharging at dangerously low temperatures. Configurable temperature and recovery settings in the APP.
  • Short Circuit Protection: Automatically disconnects the load in case of a short circuit. Configurable delay and recovery times in the APP.

6.5. Emergency Switch

The emergency switch function provides a temporary override (30 minutes) for protection features (e.g., overtemperature, overdischarge) in critical situations, allowing continued operation to prevent immediate power loss. This function can be activated via the APP.

6.6. Intelligent Sleep

The intelligent sleep function reduces the BMS's self-consumption by shutting down the protection board when it's in standby (charging/discharging current less than 1A for 26 consecutive hours). It can be reactivated via a button or by connecting the charger.

6.7. Communication Functions

The BMS supports Bluetooth for APP communication, and optional RS485 and CAN interfaces for integration with other systems. These communication protocols allow for advanced monitoring and control. Specific communication protocols are detailed in the JIKONG Protection Board communication protocol document.

Protocol Docking and APP Interface
Figure 6.3: Protocol docking compatibility with various inverter communication protocols and mobile APP setup for CAN protocols.

6.8. Display Interfaces

The BMS supports various display options, including mobile APP, PC software, and dedicated JIKONG home storage displays, allowing users to monitor battery information clearly.

Intelligent Interaction with PC Software and Display
Figure 6.4: Intelligent interaction with PC software for adjusting parameters and a dedicated display for viewing battery status.
JIKONG 3.2 inch Display
Figure 6.5: JIKONG 3.2 inch display with cable and power button. Long press to turn on or off the BMS.
JIKONG 4.3 inch Touch Screen
Figure 6.6: JIKONG 4.3 inch touch screen with various cables and a switch cable. Long press to turn on or off the BMS.
Multi-screen Display Options
Figure 6.7: Multi-screen display options including mobile APP, PC software, and JIKONG home storage display, showing detailed battery information.

7. Maintenance

The JIKONG Smart BMS is designed for durability and minimal maintenance. However, following these general guidelines can help ensure its long-term performance:

  • Regular Inspection: Periodically check all wiring connections for tightness and signs of corrosion or damage.
  • Cleanliness: Keep the BMS and its surroundings clean and free from dust, dirt, and debris. Use a soft, dry cloth for cleaning.
  • Environmental Conditions: Ensure the BMS operates within its specified temperature range (-30°C to 70°C) and avoid exposure to excessive moisture or direct sunlight.
  • Firmware Updates: Check the JIKONG website or APP for any available firmware updates to ensure optimal performance and access to new features.

8. Troubleshooting

If you encounter issues with your JIKONG Smart BMS, consider the following basic troubleshooting steps:

  • No Power/Activation: Ensure the charger is connected and providing sufficient voltage (2V higher than battery voltage) to activate the BMS. Check all main power connections (B- and P-).
  • APP Connection Issues: Verify Bluetooth is enabled on your mobile device and the BMS. Ensure the APP is the latest version. Try restarting both the BMS (by disconnecting and reconnecting power) and your mobile device.
  • Protection Triggered: If a protection (e.g., overvoltage, overcurrent) is triggered, check the APP for specific alarm messages. Address the underlying cause (e.g., reduce load, check charger output, allow battery to cool down).
  • Balancing Issues: Confirm that active balancing is enabled in the APP and that the balance trigger voltage difference is set appropriately. Ensure all balance wires are correctly connected and undamaged.
  • Incorrect Readings: If voltage or current readings appear inaccurate, check all sensor connections and ensure the BMS is properly calibrated via the APP (if calibration options are available).

For more detailed troubleshooting or persistent issues, refer to the comprehensive troubleshooting guide in the official PDF manual or contact JIKONG customer support.

9. User Tips

  • Initial Setup: Always perform a thorough check of all wiring, especially balance leads, before the first power-up. This prevents potential damage.
  • APP Monitoring: Regularly use the mobile APP to monitor cell voltages, temperatures, and current. This helps in understanding battery behavior and proactively addressing potential issues.
  • Parameter Customization: Take advantage of the APP's parameter customization features to fine-tune the BMS settings to your specific battery pack and application needs.
  • Heat Management: If using the optional heating function, ensure it's configured correctly for your climate to protect cells in cold conditions.

10. Warranty and Support

For detailed warranty information, please refer to the official JIKONG product documentation or contact your point of purchase. JIKONG provides technical support for its products.

Item Guides & Documents: A comprehensive user manual in PDF format is available for download. This document contains detailed information on product specifications, installation, operation, and advanced settings.

You can view the user manual PDF here: JIKONG Smart BMS User Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.