1. Introduction
The Baofeng UV-5R mini is a compact, multi-band amateur radio transceiver designed for reliable communication. It features a 1.44-inch TFT color display, dual PTT buttons, and supports wireless programming via a smartphone app. This manual provides detailed instructions for setting up, operating, and maintaining your UV-5R mini walkie talkie.

Figure 1: Baofeng UV-5R mini Walkie Talkies in various colors.
2. Package Contents
Each package of the Baofeng UV-5R mini walkie talkie typically includes the following items:
- 2 × UV-5R mini Radio Body
- 2 × 1600mAh Type-C Rechargeable Battery (BC-5M)
- 2 × FM/136-174/400/520MHz SMA-Female Antenna
- 2 × Belt Clip
- 2 × USB-C Charging Cable
- 2 × Lanyard
- 1 × English Instruction Manual

Figure 2: Included accessories for the Baofeng UV-5R mini.
3. Setup Guide
3.1. Unboxing and Initial Assembly
Refer to the unboxing video for a visual guide on assembling your walkie talkie.
Video 1: Unboxing and initial setup of the Baofeng UV-5R mini.
3.2. Battery Installation
- Align the battery with the back of the radio body.
- Slide the battery upwards until it clicks into place.
3.3. Antenna Attachment
- Screw the SMA-Female antenna clockwise into the connector on top of the radio until it is finger-tight.
3.4. Belt Clip Attachment
- Align the belt clip with the designated slot on the back of the battery.
- Slide the belt clip downwards until it locks securely.
3.5. Charging the Battery
The 1600mAh battery features a direct Type-C charging port for convenience.
- Connect the provided USB-C charging cable to the Type-C port on the battery.
- Connect the other end of the USB-C cable to a compatible USB power source (e.g., wall adapter, power bank, computer USB port).
- The charging indicator on the radio or battery will show the charging status.

Figure 3: Type-C charging port on the battery.
4. Operating Instructions
4.1. Power On/Off
To power on the radio, rotate the volume knob clockwise. To power off, rotate it counter-clockwise until it clicks.
4.2. Frequency/Channel Mode (VFO/MR)
The radio supports both Frequency Mode (VFO) for direct frequency input and Channel Mode (MR) for stored channels. Use the V/M button to switch between these modes.
4.3. Dual PTT Switches
The UV-5R mini features dual PTT switches, allowing you to transmit on two different frequencies or channels without switching modes. Press the top PTT for the upper display frequency/channel and the bottom PTT for the lower display frequency/channel.

Figure 4: Dual PTT buttons for convenient operation.
4.4. Menu Navigation
Press the 'MENU' button to access the radio's settings. Use the up/down arrow keys to navigate through options and 'OK' to select. 'EXIT' returns to the previous screen.
4.5. Scanning
The radio supports various scanning functions:
- **Frequency Range Scan**: Scans within a defined frequency range.
- **Scan Mode**: Configures how the scan pauses (e.g., Time, Carrier, Search).
- **Scan Memory**: Scans through all stored channels or specific types (Decoder, Encoder).

Figure 5: Scan menu options.
4.6. Squelch Level Adjustment
Adjust the squelch level to filter out weak signals and background noise. Higher levels require stronger signals to open the squelch.

Figure 6: Squelch level adjustment screen.
4.7. High/Low Power Adjustment
You can select between High (5W) and Low (2W) power output depending on your communication needs to conserve battery or extend range.

Figure 7: High/Low power selection.
4.8. One-Touch Frequency Pairing
This feature simplifies frequency alignment between two radios. Press the designated button to quickly pair frequencies without complex manual settings.

Figure 8: One-Touch Frequency Pairing in action.
4.9. FM Radio Receive
The UV-5R mini can receive commercial FM radio broadcasts in the 65-108MHz range.
4.10. NOAA Weather Radio
Access 10 NOAA Weather Forecast Channels for important weather alerts and information.

Figure 9: NOAA Weather Radio display.
4.11. 1750Hz Tone Repeater Access
Use the 1750Hz tone for accessing repeaters.

Figure 10: 1750Hz Tone Repeater Access.
4.12. High-illumination Flashlight
The radio includes a built-in flashlight for convenience in low-light conditions.

Figure 11: High-illumination flashlight.
4.13. Stopwatch Timer
A stopwatch timer function is available for various timing needs.

Figure 12: Stopwatch timer display.
4.14. Wireless Programming
The UV-5R mini supports wireless programming via a dedicated smartphone application. This simplifies the process of reading and writing frequency settings.

Figure 13: Wireless programming via smartphone app.
4.15. Customizable Side Key (SK1)
The functionality of Side Key 1 can be customized to quickly access features like FM Radio, Scan, Search, or VOX.

Figure 14: Side Key 1 customization options.
4.16. Other Features
- **Dual Watch**: Monitor two frequencies simultaneously.
- **DTMF**: Dual-Tone Multi-Frequency signaling.
- **PTT-ID**: Transmit a unique ID code when the PTT button is pressed or released.
- **SOS Alarm**: Activates an emergency alarm.
- **Roger Beep**: A tone indicating the end of transmission.
- **VOX**: Voice-operated transmit for hands-free operation.
5. Maintenance
5.1. General Care
- Keep the radio dry. If it gets wet, wipe it immediately.
- Do not expose the radio to extreme temperatures.
- Avoid strong shocks or vibrations.
- Clean the radio with a soft, damp cloth. Do not use harsh chemicals or solvents.
5.2. Battery Care
- Charge the battery fully before first use.
- Avoid overcharging or completely draining the battery.
- Store the battery in a cool, dry place when not in use.
6. Troubleshooting
6.1. No Power
- Ensure the battery is properly installed and charged.
- Check if the volume knob is turned on.
6.2. No Reception or Poor Audio
- Verify the antenna is securely attached.
- Check the frequency/channel settings.
- Adjust the squelch level.
- Ensure you are within range of the transmitting radio or repeater.
6.3. Cannot Transmit
- Confirm the battery is charged.
- Check if the correct PTT button is being used for the active frequency/channel.
- Ensure the frequency is not restricted or busy.
7. Specifications
| Category | Specification |
|---|---|
| General | |
| Channel Capacity | 999 |
| Channel Spacing | 25KHz (Wide Band), 12.5KHz (Narrow Band) |
| Input Voltage | DC7.4V (Rechargeable Lithium Battery) |
| Frequency Stability | ±2.5ppm |
| Antenna Impedance | 50Ω |
| Radio Dimensions | 52(W)*107(H)*37(D)mm |
| Radio Weight | 200g (including antenna and battery) |
| Transmitter | |
| Transmit Current Drain | ≤1.6A |
| Modulation | 16K0 F3E/11K0 F3E |
| Max Frequency Deviation | ≤5KHz/≤2.5KHz |
| FM Hum & Noise | ≥-45dB/≥-40dB |
| Receiver | |
| Sensitivity | ≤0.25Uv (12dB SINAD) |
| Rated Audio Power Output | 1W 10% |
| FM Hum& Noise | ≥45dB |

Figure 15: Detailed technical specifications.
8. User Tips
- **Package Quantity**: Please note that the product is sold as a 2-piece pack, meaning two walkie talkies are included in one order.
- **Wireless Programming**: Utilize the smartphone app for easier and more efficient frequency management and programming.
- **Power Management**: Use the low power setting (2W) for shorter distances to extend battery life. Switch to high power (5W) only when necessary for longer range communication.
9. Warranty and Support
For any technical assistance, warranty claims, or support inquiries, please contact the seller directly. Ensure you retain your purchase receipt as proof of purchase.