1. Introduction
Thank you for purchasing the BAOFENG UV-5R mini. This dual-band, dual-display, and dual-watch radio provides secure, instant, and reliable communications. Please read this manual carefully before use to ensure maximum performance and safe operation of your device.
For a comprehensive guide, you may also refer to the official User Manual (PDF).
2. Safety and Regulatory Information
2.1. Important Safety Warnings
- WARNING! European Users: Operation in Transmit mode requires a valid Amateur Radio License. Failure to comply may be unlawful and liable for prosecution. Refer to the “EU” specification guide 2014/53/EU.
- ATTENTION! When programming, read factory software data first. Use a programming cable with a PC for authorized frequency, bandwidth, and power settings, complying with FCC (or EU) license certification.
- ATTENTION! Before use, read the RF Energy Exposure and Product Safety Guide for safe usage and RF energy awareness.
- PMR446, FRS, GMRS, MURS frequencies have restrictions that may make this transceiver illegal for use.
2.2. FCC Part15/IC Compliance
This device complies with Part 15 of the FCC rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
2.3. FCC RF Exposure Guidelines
- Do not use the radio with a damaged antenna. If a damaged antenna contacts the skin, a minor burn may result. Contact your local dealer for a replacement.
- Hand-Held Operation (Held-to-Face): Maintain a 1-inch (2.5 cm) spacing from the front of the radio to comply with FCC RF exposure requirements.
- Body-Worn Operation: Use the supplied belt-clip accessory. Third-party accessories (unless manufacturer-approved) should be avoided as they might not comply with FCC RF exposure guidelines.
2.4. Precautions for Portable Terminals
Operating Prohibitions:
- Do not operate in locations with fuels, chemicals, explosive atmospheres, or other flammable/explosive materials.
- Do not operate near blasting areas.
- Do not operate near medical or electronic equipment vulnerable to RF signals.
- Do not operate while driving.
- Do not operate where wireless communication equipment is prohibited.
3. Package Contents
The BAOFENG UV-5R mini package typically includes the following items:
| Item | Quantity (per unit) |
|---|---|
| UV-5R mini Radio Body | 1 |
| 1600mAh Type-C Rechargeable Battery (BC-5M) | 1 |
| FM/136-174/400-520MHz SMA-Female Antenna | 1 |
| Belt Clip | 1 |
| USB-C Charging Cable | 1 |
| Lanyard | 1 |
| English Instruction Manual | 1 |
*Note: The charger and power adapter may vary based on the dealer's final configuration.

Figure 3.1: Package Contents
4. Product Overview
The BAOFENG UV-5R mini features a compact design with a 1.44" TFT color display and a full keypad for easy operation.

Figure 4.1: Product Dimensions (52W*107H*37D mm)

Figure 4.2: Key Features and Ports
4.1. Component Identification
Refer to the diagram below for component identification:

Figure 4.3: Front View Component Diagram
- Antenna
- SK1-Customized Function Keys/Monitor button
- PTT-A Button
- OK/Menu button
- V/M-VFO/MR
- PTT-B Button
- Numeric Keypad
- Flashlight
- Volume/Power Knob
- Screen
- Accessory Port
- Cancel/Back button
- ▲ Up button/▼Down button
- A/B
- Microphone
- LED Indicator
- Battery Latch
- Type-C Charging indicator light
- Type-C Charging Port
- Search/Flashlight button
5. Setup
5.1. Attaching the Antenna
Turn the antenna clockwise until it is tight. To remove the antenna, turn it counterclockwise.
5.2. Installing the Battery
- Align the battery with the battery compartment on the back of the radio.
- Slide the battery into place until it clicks securely.
- To remove, press the battery latch and slide the battery out.
Video 5.1: Unboxing and Initial Setup (Battery & Antenna Installation)
5.3. Charging the Battery
The UV-5R mini supports Type-C charging directly on the battery. It is recommended to turn off the radio during charging.
| Indicator Light | Charging Status |
|---|---|
| Red light is always on | Charging |
| Green light is always on | Charging complete |
Charging Prohibitions:
- Do not charge in locations with fuels, chemicals, or explosive materials.
- Do not charge a wet battery; dry it with a soft, clean cloth first.
- Do not charge a deformed, leaking, or overheated battery.
- Do not charge with an unauthorized charger.
- Do not charge in areas with strong radiation.
- Avoid overcharging to prolong battery life.
6. Operating Instructions
6.1. Basic Operations
Turning On/Off:
Turn the [Volume/Power] rotary knob clockwise to turn ON, and counterclockwise to turn OFF.
Setting Volume:
Turn the [Volume/Power] rotary knob clockwise to increase volume, and counterclockwise to decrease. Avoid holding the radio close to your ear at high volumes.
Locking/Unlocking Keypad:
- Press and hold the [*] key until the screen displays the "🔒" icon to lock.
- In lock mode, you can still use intercom, adjust volume, receive/transmit, send call tones/emergency alerts, and listen to channels.
- To unlock, press and hold the [*] key again until the "🔒" icon disappears.
6.2. Channel and Frequency Management
Keypad Entry:
Use the numeric keypad to enter radio aliases, channel aliases, numbers, etc.
- Press [# ↑ ] to switch input methods.
- Press '1' for special characters (outside numeric input).
- Press '0' for a space (outside numeric input).
Select a Channel:
Press the [V/M] button to toggle between VFO (Frequency) and Channel mode. Use the ▲/▼ buttons or rotary encoder to select the desired channel. Enter a 3-digit channel number (e.g., 064 for channel 64) using the keypad.
Channel Memory:
In Frequency or Standby mode, you can store frequencies and parameters.
- Press [MENU] [3] [MENU] [1] [5]. The screen will display “MEMCH”.
- Press [MENU] to enter. Use ▲/▼ to select a channel.
- Press [MENU] to store. A sound tone confirms success.
- Press [EXIT] to return to standby mode.
*Note: Set CTCSS tones, DCS codes, or frequency offset before storing the channel. Stored channels are displayed as CH-.
Delete a Channel (DEL-CH):
- In VFO or Standby mode, press [MENU] [3] [MENU] [1] [6]. The screen will display “DELCH”.
- Press [MENU] to enter. Use ▲/▼ or rotary encoder to select the channel to delete.
- Press [MENU] to confirm.
- Press [EXIT] to return to standby mode.
*Note: Channel 1 cannot be deleted.
Main Band/Sub Band Switch:
In Standby mode, press the [A/B] key to toggle between the A and B bands. The highlighted band is the main band, the darker displayed band is the sub-band.
VFO/Channel Switch:
Press the [V/M] button to switch between VFO and channel display. VFO mode shows the ‘VFO’ icon, while MR mode shows the channel serial number.
Setting VFO Frequency:
Turn the radio to VFO mode, then press [A/B] to switch to the main channel. Input the VFO frequency directly with the keypad, or use ▲/▼ or the rotary encoder to adjust the frequency.
6.3. Communication Functions
Call Service:
All radios in a group must be on the same channel and sub-code to communicate.
- Initiate a call: Select a channel, press and hold [PTT-A] (upper screen) or [PTT-B] (lower screen). The red indicator light will be on. Speak into the microphone (2.5-5 cm away).
- Receive a call: After releasing the [PTT] key, the radio is in a receivable state. The green indicator light will be on when receiving a call.
Emergency Alarm:
In Standby mode, press the preset [SOS] key to enable or disable the emergency alarm function.
Flashlight:
In Standby mode, press the preset '8' key to turn the flashlight on or off.
FM Radio Function:
Set the [SK1] key to FM Radio via Menu >> Radio Set >> Press SK1. Press SK1 to enter radio mode. Use ▲/▼ to search channels, or [# ↑ ] for automatic search. Press [EXIT] to switch frequency band (65.0/75.0MHz). Press SK1 to exit.
Monitor:
Press and hold the pre-programmed [Monitor] key to listen for weak signals. Release to exit.
Frequency Search:
Press the pre-programmed [SEARCH] key or press and hold '8' key. The screen displays "SEARCH...". Press [# ↑ ] to switch searching band (VHF/UHF).
Reverse Frequency Function:
Short press the [*] key in relay mode to invert receive and transmit frequencies. The screen shows 'R' icon. Useful for repeater channels with frequency differences.
Talk Around Function:
In repeater mode, press [*] to switch between Talkaround Mode and Repeater Mode. In Talkaround mode, receive frequency equals transmit frequency.
Repeater Activation Tone:
Press and hold [PTT], then press [SK1] to transmit 1750Hz audio to activate a repeater.
Voice-activated transmit (VOX):
Enable VOX to transmit automatically by voice. The 'V' icon appears when enabled.
- In Standby, press [MENU][2][MENU][4] to enter Vox Switch.
- Press [MENU][2][MENU][5] to enter Vox Level. Use ▲/▼ to select level (1-9). Lower value means higher sensitivity.
- Press [MENU] to save.
- To turn off, repeat the steps and select OFF.
Dual Watch:
Allows receiving frequencies on channel A or B simultaneously. The 'D' icon appears when enabled.
- Press [MENU] [2] to enter Radio Set.
- Press [MENU] + ▲ to select "15 Dual Watch".
- Press [MENU] to enter. Use ▲/▼ to select "On".
- Press [MENU] to save.
- To turn off, select "Off".
Stopwatch Function:
Press and hold [MENU] to enable. Press [MENU] to start/stop. Press [EXIT] to exit.
Weather Radio/Scan Weather Channel (NOAA):
The radio has NOAA Weather Radio and Scan functions for weather reports.
- To turn on NOAA Weather Scan, press and hold the [0] key for 3 seconds. The radio will go to Weather band mode.
- Press and hold [# ↑ ] for 3 seconds to start/stop automatic scanning of all 10 channels.
- After stopping scan, manually select weather channel using ▲ or ▼.
- To exit Weather Radio mode, press the '0' key or [PTT] key.
*Note: Weather Channels Wx 1 Thru 10 are Receive-only channels for NOAA and Canadian weather broadcasts. You cannot transmit on these channels.
6.4. Menu Navigation
Basic Use with Arrow Keys:
- Press [MENU] to enter.
- Use ▼/▲ or encoder to navigate.
- Press [MENU] to select an item.
- Use ▼/▲ or encoder to select a parameter.
- Press [MENU] to confirm and save, or [EXIT] to cancel and return.
- Press [EXIT] at any time to exit the menu.
Using Short-cuts:
- Press [MENU] to enter.
- Use the numerical keypad to enter the menu item number.
Wireless Program Radio (APP):
You can program the radio wirelessly using the dedicated APP. Download the app by scanning the QR codes below:

Figure 6.1: Wireless Programming App QR Codes
- Press [MENU] + [4] to enter Wireless CPS.
- Press [MENU] + ▲/▼ to select "On". The 'Bluetooth' icon will be displayed.
- On your smartphone, enable Bluetooth and location services.
- Open the app, select the "5Rmini Series" model, connect to the radio.
- The app will confirm connection success and return to the home page for programming.
6.5. Shortcut Menu Operations
| Menu | Name | Setting | Description | |
|---|---|---|---|---|
| 1 | Freq Ranger | NNNNnnn | Input VFO range lower and upper frequency | |
| SCAN | Scan Mode | Time | Time Operation - scanning will resume after a fixed time has passed | |
| Carrier | Carrier Operation - scanning will resume after the signal disappears | |||
| Search | Search Operation - scanning will not resume | |||
| Scan Memory | ALL | RX_TX are saved (default is all, encoding and decoding are the same) | ||
| DECODER | Save only in Transmitter CTCSS/DCS | |||
| ENCODER | Save only in Receiver CTCSS/DCS | |||
| 2 | Radio Setting | Step | 2.5-100K | Selects the amount of frequency change in VFO/Frequency mode when scanning or pressing the ▲ or ▼ keys. |
| Squelch | OFF,LEVEL1-LEVEL5 | Squelch silences the receiver when there is no signal. Setting the squelch to 0 will open up the squelch entirely. | ||
| Power Save | OFF | Turn off radio sleep. The battery consumption is large, and the standby time may be shortened | ||
| ON | Turn on radio sleep. Turning on is more power efficient, but you might miss the first few syllables before the RX turns on. | |||
| VOX Switch | OFF | Turn off the radio VOX. | ||
| ON | Turn on the radio VOX. | |||
| VOX Level | LEVEL1-LEVEL9 | When enabled it is not necessary to push the [PTT] button on the transceiver. Adjust the gain level to an appropriate sensitivity to allow smooth transmission. | ||
| VOX Delay | 0.5......2.0s | When the VOX is enabled, set up the VOX delay to help to extend the transmission time to avoid stopping a transmission too early. 0.5s-2s, Step 0.1 second. a total of 16 times offered. | ||
| TOT | 15;30;45...180 | Maximum allowed time for transmission while holding down the PTT key. | ||
| TOA | 1......10 | Activate TOA function. Range 0 – 10 seconds, Step 1 second. | ||
| Voice | ON | Activate voice prompts | ||
| Language | English | Display menus and voice prompts in English language | ||
| ROGER | BEEP | Activate the ROGER function. Sends an end-of-transmission tone to indicate to other stations that the transmission has ended. | ||
| BackLight | 5......20 | Set the backlight off time in no-operation delay time. 5-20, step value is 5. | ||
| Power on | PICTURE | Show preset picture when radio is on | ||
| Dual Watch | ON | Monitor [A] and [B] at the same time. The display with the most recent activity ([A] or [B]) becomes the selected display. | ||
| AutoLock | ON | When ON, the keypad will be locked if not used in 8 seconds. Pressing the key for 2 seconds will unlock the keypad. | ||
| Alarm Mode | Send Sound | Transmits a cycling tone over-the-air | ||
| Alarm Tone | ON | The radio speaker sounds an alarm | ||
| ANI-Edit | 100 | View the ANI ID, and if necessary, will allow to change the ANI ID | ||
| Display ANI | ON | Enable ANI code display | ||
| DTMF-ST | DT-ST | Side Tones are heard only from manually keyed DTMF codes | ||
| PTT-ID | BOTH | The selected S-CODE is sent at the beginning and ending | ||
| 3 | Program Channel | CH.NAME | Channel 1 | View channel name, allows to rename the current channel. Press the #z key to switch the input method, allowing the input of letters, numbers and symbols. |
| RX Frequency | View the current channel Receiver frequency. | |||
| TX Frequency | View the current channel Transmitter frequency. | |||
| Trans Power | High | Selects between HIGH transmitter power when in VFO/Frequency mode. | ||
| 4 | Wireless CPS | OFF | Turn off Wireless CPS and disable the Wireless programming function | |
| ON | Enable Wireless CPS to program the radio via Wireless | |||
| 5 | Radio Info | Radio ID\Firmware\Hardware | Displays radio ID, firmware version, hardware version. to check the radio information. |
7. Maintenance
Your Two Way Radio is a precision electronic product and should be handled with care. Following these guidelines will help ensure its longevity.
- Do not attempt to open or realign the radio; this will void the warranty.
- Avoid storing the radio in direct sunlight or hot areas, as high temperatures can damage electronics and plastics.
- Do not store in dusty or dirty areas.
- Keep the radio dry; rainwater or dampness will corrode circuits.
- If the radio emits a peculiar smell or smoke, immediately turn it off and remove the battery.
- Do not transmit without an antenna.
7.1. Battery Maintenance
- Clean accumulated dust on the charging connector regularly with a clean, dry cloth.
- Charge the battery between 5°C and 40°C. Outside this range, battery life may be reduced or leakage may occur.
- To ensure a full charge when the battery is attached to the product, turn the radio off.
- Do not remove the battery or unplug the power cord during charging.
8. Troubleshooting & FAQ
8.1. Common Questions
- Q: Does the dual watch function work?
A: Yes, the dual watch function is available and can be enabled via the Radio Set menu (Menu -> Radio Set -> 15 Dual Watch). - Q: Can I listen to ATC (Air Traffic Control) communication with this walkie-talkie?
A: Yes, the BAOFENG UV-5R mini supports 108-135.99750MHz Aviation Band Receive only. - Q: Does this radio have 'zones' or 'banks' to group its 999 memory channels?
A: The manual indicates 999 channel memory. While it doesn't explicitly mention "zones" or "banks" for grouping, channels can be managed and programmed individually or via the Wireless CPS app. - Q: Does it have an FCC ID?
A: The manual states "FCC Part15/IC Compliance," indicating it is designed to comply with FCC regulations. For specific FCC ID details, refer to the product packaging or the device itself.
9. Specifications

Figure 9.1: Technical Specifications
9.1. Functional Features Overview
- 6-band scan receiver: FM78-108MHz; AM108-136MHz; VHF136-174MHz, UHF400-520MHz, 350-390MHz
- Transmit frequency: VHF144-148MHz; UHF420-450MHz
- 5W/2W RF output, dual PTT transmitter
- Wireless read/write frequency
- 1.44" TFT large screen, full keypad, full open menu operation, local channel storage and deletion
- Full keypad manual frequency input, 999 channel memory
- One-click frequency pairing, easy pairing and grouping
- Relay function settings: frequency difference, frequency difference direction, relay activation audio settings
- Alarm function (three types of alarm settings)
- Built-in input method, supports local editing of channel name, receiving frequency, transmitting frequency
- DTMF encoding and decoding function, 20 DTMF calls
- Frequency hopping function
- Side button function customization: radio, scan, sweep, voice control, flashlight, alarm
- FM radio function (receive frequency 78~108MHz)
- Automatic or manual keypad lock, backlight selection
- Support Type-C charge
10. User Tips
- Enhanced Range: For better range, consider using a longer, higher-quality antenna than the stock one.
- Easy Programming: The radio is easy to program both via a programming cable (using Baofeng CPS or CHIRP software) and wirelessly through the dedicated smartphone app.
- Portability: Its compact size (similar to a Nokia 3310 but slightly thicker) makes it very convenient to carry in any pocket.
- Versatile Use: Excellent for camping, small excursions, or as a general-purpose communication device.
- Battery Life: Users report decent to good battery autonomy, especially with the 1600mAh battery.
- Dual PTT: The dual transmit buttons are a game-changer for quick and intuitive operation.
- FM Radio & Airband: Enjoy the built-in FM radio and the ability to receive airband communications.
11. Disclaimer
The accuracy and completeness of the contents are sought in the process of compilation, but we do not bear any responsibility for possible errors or omissions. With the continuous development of technology, we reserve the right to change the design and specification of the product without notice. No copy, modification, translation, and dissemination of this handbook may be made in any form without the prior written authorization of our department.



Figure 11.1: Compliance and Environmental Marks