HGLRC T ONE TX Module

Contents

HGLRC T ONE TX Module ELRS 868/915Mhz 2W Power Transmitter

User Instruction Manual

HGLRC T ONE TX Module ELRS 915Mhz, 2W high power/strong signal/wide transmission distance

Figure 1: HGLRC T ONE TX Module ELRS 915Mhz, highlighting its 2W high power, strong signal, and wide transmission distance capabilities.

1. Introduction

The HGLRC ELRS T ONE TX Module is an advanced open-source RC link transmitter based on the ExpressLRS project, designed for various RC applications, particularly aircraft models. This module is engineered for long-distance flights, offering a high power output of up to 2W. It features an integrated heat sink and turbofan cooling system to ensure stable and long-term operation even at high power levels. The T ONE TX Module is highly versatile, featuring two replaceable bottom shells (JR standard 5-pin and NANO standard 8-pin) to ensure compatibility with a wide range of remote controls available on the market.

2. Key Features

  • High Power Output: Maximum wireless power of 2W for ultra-long-distance flight, providing stronger signals and wider transmission range.
  • Efficient Cooling System: Equipped with a CNC metal heat sink and turbofan to manage high temperatures during high-power operation, ensuring stable performance without power loss.
  • Broad Compatibility: Includes two replaceable bottom shells (JR standard 5-pin and NANO standard 8-pin) for compatibility with most remote control TX Module compartments.
  • OLED Display: High-contrast OLED screen provides clear information display in various environments.
  • External Power Input: XT30 port supports external power input up to 25.2V (2S~6S).

3. Package Contents

Please verify that all items listed below are included in your package:

  • HGLRC 915 TX Module (NANO) x 1
  • JR compartment replacement bottom shell x 1
  • JR compartment replacement bottom shell cable (pre-assembled on JR compartment) x 1
  • 915 TX Module antenna x 1
  • Hexagonal wrench x 1
  • Universal QR code instruction card x 1
  • Sticker x 1
Image showing all included components: HGLRC 915 TX Module (NANO), JR compartment replacement bottom shell, JR compartment replacement bottom shell cable, 915 TX Module antenna, Hexagonal wrench, Universal QR code instruction card, and Sticker.

Figure 2: Contents of the HGLRC T ONE TX Module package.

4. Specifications

Parameter Value
Product Model T ONE TX Module
Working Frequency Band 868-915MHz FCC
Output Power 100mw/250mw/500mw/1000mw/2000mw
Refresh Rate 25Hz/50Hz/100Hz/200Hz
XT30 External Power Input Voltage DC 7.4V~25.2V (2S~6S)
Adaptive Position JR standard 5-pin / NANO standard 8-pin
Display Type OLED
Weight (Nano without antenna) 76g
Weight (JR without antenna) 85g
Dimensions (NANO bottom shell without antenna) 41 x 85 x 29 mm
Dimensions (JR bottom shell without antenna) 41 x 85 x 45.5 mm
Material Composite Material
Recommended Age 14+ years
Use Vehicles & Remote Control Toys
Is Electric No battery
Batteries Included No
Diagram showing product packaging dimensions and module dimensions for both NANO and JR compartments, including weights.

Figure 3: Dimensions and weight specifications for the TX Module with NANO and JR bottom shells.

5. Setup Instructions

  1. Choose the Correct Bottom Shell: The T ONE TX Module comes with two replaceable bottom shells: JR standard 5-pin and NANO standard 8-pin. Select the shell that matches your remote control's TX Module compartment.
  2. Install the Bottom Shell: If you need to change the pre-assembled JR bottom shell, carefully remove the 4 screws securing the current shell. Disconnect the 3-pin cable. Attach the desired bottom shell and connect the 3-pin cable, then secure it with the 4 screws.
  3. Mount the TX Module: Insert the TX Module into the corresponding compartment on your remote control. Ensure it is seated firmly.
  4. Attach the Antenna: Screw the provided 915 TX Module antenna onto the module's antenna connector. Ensure it is finger-tight.
  5. Power Connection: For high-power operation, connect an external power source (DC 7.4V~25.2V, 2S~6S LiPo battery) to the XT30 external power input port on the module.
  6. Initial Configuration: Refer to the Universal QR code instruction card included in your package for detailed binding procedures and initial configuration steps specific to the ExpressLRS system.
HGLRC T ONE TX Module with antenna attached, showing the overall assembled unit ready for installation.

Figure 4: Assembled HGLRC T ONE TX Module with antenna.

6. Operating Instructions

  1. Power On: Ensure the TX Module is correctly installed and powered. Turn on your remote control.
  2. Monitor Display: The OLED display will show operational information such as power output, refresh rate, and connection status. The high-contrast display ensures readability in various lighting conditions.
  3. Adjust Settings: Use the control knob (if present) or your remote control's interface to adjust settings like output power (100mw to 2000mw) and refresh rate (25Hz to 200Hz) as required for your flight conditions and receiver.
  4. Long-Range Operation: The 2W power output is designed for extended range. Always operate within legal limits and maintain visual line of sight with your aircraft.
  5. Binding: Follow the ExpressLRS binding procedure as detailed in the QR code instruction card to link your TX Module with your receiver.
Close-up view of the HGLRC T ONE TX Module, highlighting the OLED display and control knob for operational adjustments.

Figure 5: Close-up of the TX Module's OLED display and control interface.

7. Maintenance

  • Cooling System: The module's cooling system (CNC metal heat sink and turbofan) is crucial for high-power operation. Ensure the cooling fins and fan are free from dust and debris to maintain optimal performance.
  • Cleaning: Gently clean the exterior of the module with a soft, dry cloth. Avoid using liquids or solvents that could damage the electronics or display.
  • Storage: Store the TX Module in a dry, cool environment, away from direct sunlight and extreme temperatures.
  • Antenna Care: Handle the antenna with care to prevent bending or damage. Ensure it is securely attached during operation.

8. Troubleshooting

  • No Power/Display:
    • Check all power connections, including the XT30 external power source if used.
    • Ensure the module is correctly seated in the remote control's compartment.
    • Verify the external power source (battery) is charged and providing the correct voltage (7.4V~25.2V).
  • Poor Signal/Range:
    • Ensure the antenna is securely attached and oriented correctly.
    • Check for obstructions between the transmitter and receiver.
    • Increase the output power setting on the TX Module, if permissible and within legal limits.
    • Verify that the cooling system is functioning properly to prevent thermal throttling.
  • Compatibility Issues:
    • Double-check that the correct bottom shell (JR or NANO) is installed for your specific remote control model.
    • Consult your remote control's manual or manufacturer's website for compatibility with external TX modules.

For more complex issues, refer to the ExpressLRS documentation or contact HGLRC customer support.

9. User Tips

  • Verify Compatibility: Before purchase or installation, always confirm that the HGLRC T ONE TX Module's JR standard 5-pin or NANO standard 8-pin interface is compatible with your specific remote control model (e.g., Radiomaster GX12).
  • Optimal Cooling: While the module has an excellent cooling system, ensure good airflow around the module, especially during prolonged high-power use, to maximize performance and longevity.
  • Firmware Updates: As an ExpressLRS-based module, periodically check the official ExpressLRS project website for firmware updates to ensure you have the latest features and performance improvements.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the Universal QR code instruction card included in your package or visit the official HGLRC website. Keep your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.