1. Introduction
Thank you for choosing the dawndesslo T13 Multi-Jointed Robot Action Figures. These figures are designed for dynamic posing and display, featuring multiple articulation points and magnetic feet for enhanced stability. This manual will guide you through the assembly, operation, and maintenance of your new action figure.

Figure 1: Product overview with assembled figures and weapon sprue.
2. Safety Information
- Small Parts Warning: This product contains small parts and is not suitable for children under 3 years of age. Adult supervision is recommended during assembly and play for children aged 3-12.
- California Proposition 65 Warning: ⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- Choking Hazard: Keep all packaging materials and small components away from infants and young children to prevent choking.
- Intended Use: This product is intended for display and light play. Avoid excessive force or rough handling to prevent damage.
3. Package Contents
Your package contains the following items:
- T13 Robot Action Figure components (semi-finished product on sprues)
- Assorted weapon accessories (on sprues)
Please inspect all components upon receipt. If any parts are missing or damaged, contact customer support.
4. Assembly Instructions
The T13 Robot Action Figure is a semi-finished product and requires assembly. Follow these steps carefully:
- Prepare Components: Carefully detach all robot body parts and weapon accessories from their respective 'Assembly boards' (sprues). Use a hobby knife or nippers for clean cuts to avoid damaging the parts. Smooth any rough edges with a file if necessary.
- Assemble Body: Connect the various body segments (limbs, torso, head) according to the figure's design. The joints are multi-articulated and designed to snap together. Apply gentle, even pressure.
- Attach Weapons: Select desired weapon accessories and attach them to the figure's hands or designated attachment points.
- Magnetic Feet: Note that the soles of the feet contain magnets. This feature allows the figure to stand securely on metallic surfaces, enhancing posing options.

Figure 2: Assembly board and magnetic feet detail (Red figure example).

Figure 3: Assembly board and magnetic feet detail (Green figure example).
5. Operating Your Action Figure
- Posing: The figures feature multi-jointed articulation, allowing for a wide range of dynamic poses. Gently manipulate the joints to achieve desired positions. Avoid forcing joints beyond their natural range of motion.
- Weapon Use: Attach the various weapon accessories to the figure's hands or designated slots to customize its appearance and combat readiness.
- Magnetic Display: Utilize the magnetic feet to pose your figures on suitable metallic surfaces for stable and creative displays.

Figure 4: Figures posed dynamically on a metallic surface.
6. Care and Maintenance
- Cleaning: To clean your action figure, gently wipe it with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid harsh chemicals or abrasive cleaners.
- Storage: Store the figure in a cool, dry place away from direct sunlight and extreme temperatures to prevent material degradation or discoloration.
- Joint Care: If joints become stiff, apply a small amount of silicone-based lubricant (not oil-based) to the joint area. If joints become loose, a thin layer of clear nail polish or a similar adhesive can be applied to the ball joint and allowed to dry before reassembly to increase friction.
7. Troubleshooting
- Parts not fitting: Ensure you are connecting the correct parts. Some joints may require a firm, but gentle, push to snap into place. If a part is too tight, carefully trim excess plastic from the peg or hole.
- Figure unstable: Ensure all joints are fully connected. Utilize the magnetic feet on a metallic surface for improved stability. Check if the figure's center of gravity is balanced for complex poses.
- Loose joints: Refer to the 'Joint Care' section under Maintenance for tips on tightening loose joints.
8. Specifications
| Feature | Detail |
|---|---|
| Brand Name | dawndesslo |
| Item Type | Model |
| Completion Degree | Semi-finished Product (requires assembly) |
| Mfg Series Number | Robot |
| Theme | Robots |
| Material | PVC |
| Gender | Unisex |
| Recommend Age | 3-6Y, 6-12Y, 14+y, 18+ (Adult supervision recommended for younger children due to small parts) |
| Origin | Mainland China |
| Certification | CE |
| High-concerned chemical | None |
| Special Feature | Multi-Jointed Movable, Magnetic Feet |
| Approx. Package Weight | 0.121 kg |
| Approx. Package Dimensions | Compact packaging (specific dimensions not provided) |
9. User Tips
- When detaching parts from the sprue, use a sharp hobby knife or nippers to ensure clean cuts and prevent stress marks or damage to the plastic.
- Test the fit of joints before applying full pressure. If a joint is too tight, gently widen the hole or sand down the peg slightly.
- Experiment with different weapon combinations and magnetic surfaces to create unique display scenarios.
10. Warranty and Support
This product is covered against manufacturing defects. If you encounter any issues with your dawndesslo T13 Multi-Jointed Robot Action Figure, please contact the seller or retailer from whom you purchased the product for assistance. Please retain your proof of purchase.