ECHTPOWER ES01

Contents

ECHTPower Wireless Game Controller

Model: ES01

Introduction

This manual provides detailed instructions for the ECHTPower ES01 wireless game controller. It covers setup, connection, operation of various features, maintenance, and troubleshooting. Please read this manual thoroughly before using your controller to ensure optimal performance and longevity.

For a complete PDF version of this manual, please refer to the official user manual available at ECHTPower ES01 User Manual (PDF).

Package Contents

Ensure all items are present in your package:

  • Wireless Controller x 1
  • Charging Cable x 1 (USB-C)
  • Instruction Manual x 1

Specifications

Technical Parameters

ParameterValue
Power SupplyBuilt-in polymer battery
Usage Time10-16 hours
Battery Capacity800mAh
Charging Time2.5 hours
Charging VoltageDC 5V
Charging Current250mA

Compatible Platforms

  • Nintendo Switch (including Switch 2, Switch OLED, Switch Lite)
  • PC
  • Android
  • iOS

Controller Layout

Familiarize yourself with the buttons and features of your ECHTPower ES01 controller:

Front view of ECHTPower ES01 wireless game controller
Figure 1: Front View of the ES01 Controller
  • Home Button: Powers on/off the controller, returns to home screen.
  • Turbo Button (+ Button): Activates/deactivates turbo functions.
  • Screen Capture Button (- Button): Takes screenshots.
  • A/B/X/Y Buttons: Standard action buttons.
  • Left Joystick / L3: Left analog stick, L3 button when pressed.
  • Right Joystick / R3: Right analog stick, R3 button when pressed.
  • D-pad: Directional pad.
  • M Button: Used for macro programming.
  • R/L Buttons: Shoulder buttons.
  • ZR/ZL Buttons: Trigger buttons.
  • Type-C Charging Port: For charging the controller.
  • Channel LED: Indicates connection status and player number.
  • ML/MR Buttons: Programmable back buttons.
  • Vibration Switch: Adjusts vibration intensity.
  • Light Switch Key: Controls RGB lighting.
Back view of ECHTPower ES01 controller showing programmable buttons MR and ML
Figure 2: Back View with Programmable Buttons

Setup and Connection

Initial Activation

Before initial use, the controller must be charged using the provided USB-C data cable to activate its internal battery.

Power On/Off

  • Power On: Lightly press the Home button.
  • Power Off: Lightly press the Pairing button.

Connection Methods for Various Devices

PlatformConnection MethodPower On CombinationDevice NameIndicator Lights
SwitchWiredUSB Direct PlugAutomatic channel indicator lightAutomatic channel indicator light
BluetoothLong press pairing button for 3 secondsAutomatic channel indicator lightAutomatic channel indicator light
PCWired XinputUSB direct insertionXbox 360 ControllerLED1+LED4
Wired DinputLong press '+' and '-' in Wired Xinput modeGamepadLED2+LED3
Bluetooth XinputY + pairing buttonXbox 360 ControllerLED1+LED4
Bluetooth DinputX + pairing buttonGamepadLED2+LED3
iOSBluetoothY + pairing buttonXbox 360 ControllerLED1+LED4
AndroidBluetoothX + pairing buttonGamepadLED2+LED3

Note: When connecting to the Switch via wired connection, ensure that the "Settings → Handle and Sensor → Pro Handle Wired Connection" function is enabled on your Switch console.

Overhead view of multiple devices compatible with the ECHTPower ES01 controller
Figure 3: Wide Compatibility Across Platforms

Operating Instructions

Turbo Rapid Fire Function

Supported buttons: A/B/X/Y/L/R/ZL/ZR/D-pad

  • Manual Turbo: Hold the T button, then press and hold one of the supported buttons for 3 seconds. The controller will vibrate once to activate manual rapid fire.
  • Automatic Turbo: Hold the T button, then press and hold the button already configured for manual rapid fire again for 3 seconds. The controller will vibrate once to activate automatic rapid fire.
  • Disable Turbo: Hold the T button, then press and hold the button configured for automatic rapid fire again for 3 seconds. The controller will vibrate once to disable the rapid fire function for that button.
  • Clear All Turbo Settings: Press and hold the T button for 3 seconds to clear rapid fire settings for all buttons.
  • Speed Adjustment: Rapid fire speed can be adjusted to fast, medium, or slow. Default is slow. Hold the T button on the controller and simultaneously move the right joystick up or down to adjust the speed.
Controller with 'Ultra Turbo Function' text overlay
Figure 4: Ultra Turbo Function

Macro Setting for Back Buttons (ML/MR)

Supported buttons for mapping: A/B/X/Y/L/R/ZL/ZR/L3/R3/D-PAD

  • Entering Programming Mode: Press and hold the M button for 2 seconds. The left and right 3D rings will slowly flash (if LED effects are enabled), indicating the controller has entered programming mode.
  • Mapping a Button: Press the button you want to program (map). The left and right 3D rings will flash quickly.
  • Programming Confirmation: Press ML or MR. The left and right 3D rings will change from fast flashing to steady, indicating successful button programming.
  • Note: You can program up to 16 button inputs. If no button is pressed for more than 1 minute, the controller will automatically exit programming mode.
  • Clearing Settings: After holding the M button for 2 seconds and seeing the left and right 3D rings flash slowly, press ML or MR to clear the programmed back button settings.
Controller back view with 'Programmable Macro Function' text overlay
Figure 5: Programmable Macro Function

Light Adjustment (RGB Lighting)

  • Light Key + R3: Switch between 3 lighting modes: Steady, Breathing/Running Horse, Rainbow.
  • Light Key + L3:
    • In Steady mode: Switch colors.
    • In Breathing/Running Horse mode: No effect.
    • In Rainbow mode: Pause rainbow effect.
  • Reset Lights to Default: Press the + and Turbo buttons simultaneously for 3 seconds. The motor will vibrate briefly, and the lights will reset.
  • Turn Off/On Joystick Ring Lighting: Press and hold the lighting button for 10 seconds to turn off the 3D joystick ring lighting. Press and hold it again for 10 seconds to reactivate.
Controller with 9-color RGB lighting around joysticks and buttons
Figure 6: Customizable 9-Color RGB Lighting

Vibration Adjustment

  • Adjust Intensity: After connecting the controller, hold the Vibration Switch button on the back of the controller while moving the left 3D joystick up or down. This will increase or decrease motor vibration intensity. The controller will provide 3 seconds of vibration feedback after adjustment. Four intensity levels are available: 100%, 70%, 30%, and 0%, with 70% set as default.
  • Disable/Re-enable Vibration: Press and hold the Vibration Switch for 10 seconds to disable the vibration function of both motors. Press and hold it again for 10 seconds to re-enable.
Diagram illustrating the dual vibration feature with adjustable intensities
Figure 7: Dual Vibration with Adjustable Intensities

Hall Effect Joysticks

The ES01 controller features Hall Effect joysticks, which use electromagnetic sensors for precise position detection, significantly reducing the common issue of joystick drift and enhancing durability.

Close-up of a Hall Effect joystick with a blue glow, highlighting its precision
Figure 8: Hall Effect Joystick Precision

Charging and Battery

Charging the Controller

Connect the provided USB-C charging cable to the controller and a compatible USB power adapter (DC 5V). The charging indicator will glow orange while charging. Once fully charged, the orange indicator will turn off.

Low Battery Indicator

When the battery is low, the light of the current channel (player indicator) will flash quickly to remind you to charge the controller.

Controller with an overlay indicating an 800mAh battery capacity
Figure 9: 800mAh Large Capacity Battery

Standby Mode

  • Manual Standby: When the controller is powered on, short press the Pairing button to enter standby mode.
  • Automatic Standby (Pairing): If the controller is in pairing mode and fails to pair after 60 seconds, it will automatically enter standby mode.
  • Automatic Standby (Inactivity): When connected to a console, the controller will automatically enter standby mode after 15 minutes of inactivity.

Resetting the Controller

If the controller malfunctions or becomes unresponsive, you can perform a reset:

  • Press and hold the Home button for 10 seconds. This will reset the controller to its default state.

User Tips

  • NFC/Amiibo Compatibility: The ECHTPower ES01 controller does not support NFC for Amiibo functionality. Please use official Nintendo controllers if this feature is required.
  • Optimal Performance: For the best gaming experience, ensure your controller is fully charged before extended play sessions.
  • Customization: Experiment with the RGB lighting and vibration settings to find your preferred setup for different games.

Troubleshooting

  • Controller Not Responding: Try resetting the controller by holding the Home button for 10 seconds. Ensure it is charged.
  • Connection Issues: Double-check the connection method for your specific device (refer to the 'Connection Methods' table). For Switch wired connection, verify the 'Pro Handle Wired Connection' setting is enabled.
  • Joystick Drift: The ES01 features Hall Effect joysticks designed to prevent drift. If you experience any issues, try resetting the controller. If the problem persists, contact support.
  • Lights Not Working: Ensure the lighting feature is enabled (Light Key + R3). If still not working, try resetting the lights by pressing + and Turbo simultaneously for 3 seconds.
  • Vibration Not Working: Check if the vibration function is enabled by holding the Vibration Switch for 10 seconds to toggle it. Adjust intensity if needed.

Warranty and Support

The ECHTPower ES01 controller comes with a 12-month warranty for worry-free gaming.

Contact Information

  • Manufacturer: Shenzhen Mike Morgen Technology Co., Ltd
  • Address: Room 302, 3rd Floor, Building 5, Zone C, Jinxiu Huacheng Science and Technology Park, No. 36 Xiangjiaotang Second Road, Xiangjiaotang Community, Bantian Street, Longgang District, Shenzhen
  • Telephone: 0755-21010839
  • Email: service@echtpower.com
  • Website: www.echtpower.com
  • FCC ID: 2A88F-ES01

Our support team is available 24/7 to assist you. We aim to resolve all issues within 24 hours.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.