FONLAND BFL-CW1500-A, BFL-CW2000-A

Contents

FONLAND Fiber Laser Source User Manual

Models: BFL-CW1500-A, BFL-CW2000-A

Brand: FONLAND

1. Introduction

This manual provides essential information for the safe and efficient operation, installation, and maintenance of the FONLAND BWT Fiber Laser Source models BFL-CW1500-A and BFL-CW2000-A. Please read this manual thoroughly before operating the device.

Key Features

  • Low cost, maintenance-free operation.
  • High power stability.
  • High electro-optical conversion efficiency.
  • Maximum modulation frequency up to 5kHz.
  • Optimized processing quality with continuous and modulated pulse modes.
  • Excellent beam quality, suitable for precision processing.
  • High system stability.
  • Simple control interface.

Applications

  • Precision cutting
  • Surface treatment
  • 3D printing (SLS/SLM)
  • 3D cutting and welding
  • Precision welding
  • Drilling
  • Sheet metal processing
  • Lithium battery production

The FONLAND BWT fiber laser sources are designed with excellent beam quality, allowing the laser beam to be focused to near diffraction limits for precision processing. They offer both continuous and modulated pulse modes to optimize processing quality and significantly reduce the heat-affected zone. With reliable performance and a modular all-fiber design, all optoelectronic components are encapsulated in a robust casing, ensuring durability in harsh industrial environments.

2. Technical Specifications

Optical Characteristics

ParameterSpecification (1500W Model)
Power1500W
Wavelength1080±10 nm
Output fiber core diameter20µm, 25µm or 50µm
Cable Length12 m or customized
Beam Delivery Output ConnectorQBH or customized
Guide BeamRed
Operation ModeContinuous or Modulated
PolarizationRandom
Power Stability (25℃)<±1.5% (2h)
Power Adjustment Scope10%-100%
Max. Modulation Frequency5kHz

Mechanical Dimensions & Weight

ParameterSpecification
Weight<26Kg
Outline Feature (H×W×D)80mm×402mm×346mm

Electrical Characteristics

ParameterSpecification
Voltage220±20V, AC, PE, 50/60Hz
Power Consumption4.5 kW
Control InterfaceRS232

Water Cooling Parameters

ParameterSpecification
Min. Water Cooling Capacity3.5 kW
Temperature Settings25℃ (Laser Module), 30℃ (QBH)
Cooling Tubes Size (Inner)Φ12mm
Cooling Water Flux>15L/min
QBH Cooling Water Flux1.5~2.0L/min

3. Setup and Installation

Proper installation is crucial for the safe and optimal performance of your fiber laser source. Ensure all connections are secure and follow local electrical codes.

3.1 Unpacking and Inspection

  • Carefully unpack the laser source and all accessories.
  • Inspect the unit for any signs of damage during transit. Report any damage immediately.
  • Verify all components listed in the package contents are present.
The laser source and accessories packaged in a cardboard box.
Figure 3.1: Package contents upon arrival.

3.2 Electrical Connections

  • Connect the laser source to a stable 220V AC power supply (50/60Hz) as specified.
  • Ensure proper grounding (PE connection) to prevent electrical hazards.
  • Refer to the detailed wiring diagram for specific electrical connections.
Detailed close-up images of the laser head, control panel, electrical wiring, and fiber output.
Figure 3.2: Close-up of electrical wiring and control panel connections.

3.3 Water Cooling System Connection

  • Connect the water cooling system to the laser source using Φ12mm inner diameter cooling tubes.
  • Ensure the cooling water flux is greater than 15L/min for the main laser module and 1.5-2.0L/min for the QBH connector.
  • Set the chiller temperature to 25℃ for the laser module and 30℃ for the QBH.

3.4 Fiber Optic Cable Connection

  • Carefully connect the QBH output connector to your laser processing head.
  • Avoid bending or twisting the fiber optic cable excessively to prevent damage.
Front view of the laser source with the fiber cable connected.
Figure 3.3: Fiber cable connected to the laser source.

4. Operation

The FONLAND fiber laser source is designed for ease of use with a simple control interface. Always ensure safety precautions are followed during operation.

4.1 Powering On

  • Ensure all electrical and cooling connections are correctly made and secure.
  • Turn on the water chiller first and verify proper water flow.
  • Switch on the main power to the laser source. Observe the indicator lights on the control panel.

4.2 Laser Emission Control

  • Use the RS232 control interface to communicate with the laser source.
  • Adjust the laser power within the 10%-100% range as required for your application.
  • Select between continuous or modulated operation modes based on your processing needs.
  • The red guide beam assists in aiming the laser.
Image showing a laser welding setup with filler material, illustrating product application.
Figure 4.1: Schematic of laser welding setup with filler material.
Close-up of laser welding process on a metal surface.
Figure 4.2: Example of laser welding application.

5. Maintenance

While the FONLAND fiber laser source is designed for low maintenance, regular checks can extend its lifespan and ensure consistent performance.

5.1 Daily Checks

  • Verify the water chiller is operating correctly and maintaining the set temperatures.
  • Check for any visible damage to the fiber optic cable or connectors.
  • Ensure the operating environment is clean and free from excessive dust or humidity.

5.2 Periodic Maintenance

  • Clean the QBH connector and laser head optics regularly using appropriate cleaning materials and procedures.
  • Inspect electrical connections for any signs of wear or loosening.
  • Monitor the water quality in the chiller and replace or filter as recommended by the chiller manufacturer.

6. Troubleshooting

This section provides basic troubleshooting steps for common issues. For more complex problems, contact technical support.

6.1 No Laser Output

  • Check if the power supply is connected and switched on.
  • Verify the water chiller is running and providing adequate cooling.
  • Ensure all interlocks (if applicable) are closed.
  • Check the control interface for any error messages.

6.2 Unstable Laser Power

  • Confirm the water chiller temperature is stable and within the recommended range.
  • Inspect the fiber optic cable and connectors for cleanliness and damage.
  • Ensure the ambient temperature is stable and within the operating range.

6.3 Overheating Alarm

  • Check the water flow rate and ensure it meets the specifications.
  • Verify the water chiller is functioning correctly and its cooling capacity is sufficient.
  • Clean any dust or obstructions from the laser source's ventilation openings.

7. Dimensions

The following diagram illustrates the outline dimensions of the FONLAND Fiber Laser Source.

Outline dimensions diagram of the FONLAND BWT Fiber Laser Source, showing front, top, and side views with measurements.
Figure 7.1: Outline Dimensions of the Fiber Laser Source.
DimensionValue
Height (H)80 mm
Width (W)402 mm
Depth (D)346 mm
Main Body Depth360 mm
Handle Offset33 mm

8. Package Contents

The standard package for the FONLAND Fiber Laser Source typically includes:

  • FONLAND BWT Fiber Laser Source Unit (BFL-CW1500-A or BFL-CW2000-A)
  • Fiber Optic Cable (12m or customized length)
  • Power Cable
  • Control Cable (RS232)
  • Cooling Water Tubes
  • User Manual (PDF available online: View PDF)
The laser source and accessories packaged in a cardboard box.
Figure 8.1: Typical package contents.

9. Product Media

Product Showcase Video

Description: A short video showcasing the FONLAND BWT Fiber Laser Source and its features.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please contact FONLAND Official Store directly. Ensure you have your product model and serial number ready when contacting support.

Contact Information:

  • Email: hliko@kindlelaser.com
  • Whatsapp: +8618107230934

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.