1. Introduction
This manual provides detailed instructions for the use, operation, safety precautions, and technical specifications of your JETO JT-88 4K Anti-Shake Action Camera. Please read this manual carefully before using the camera and keep it for future reference. This high-definition digital video recording device is mini-sized, waterproof, and features digital video recording, photo-shooting, and high-speed USB data transmission, allowing you to capture your experiences anytime, anywhere.
The JETO JT-88 is an ultra-slim action camera with an integrated design, suitable for various activities such as vehicle data recording, mountain climbing, skiing, cycling, parachuting, diving, fishing, and hunting.
2. Safety Information
⚠ Camera products can only be used for purposes permissible under applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.
- Do not insert any object into the TF slot except for the TF card.
- It is normal for the TF card to heat up after prolonged use.
- It is normal for the camera to heat up after prolonged use.
3. Package Contents
Please check that all the following items are included in your package:
- 4K Anti-shake Camera (1)
- USB Cable (1)
- Swivel Back Clip (1)
- Magnetic Chassis with Lanyard (1)
- Camera Waterproof Case (1)
- Helmet brace accessory set
- Bicycle frame accessory set
- USB card reader (Gift)

4. Product Overview
The JETO JT-88 is a compact and versatile 4K action camera designed for capturing high-quality video and photos in various environments. It features advanced electronic image stabilization (EIS) to ensure smooth footage even during dynamic activities.
4.1. Key Features
- Anti-Shake and Ultra HD 4K/30FPS video quality
- Super mini portable size (64.5mm x 28mm x 20mm), easy to carry (36g/1.27oz)
- 12MP wide-angle lens (120° FOV)
- Life waterproof function (up to 30M with waterproof case)
- Support video recording while charging
- Automatic Loop recording
- Support high capacity TF card (MicroSD / TF)
- PC webcam functionality
- Built-in vibrating motor for feedback
- WIFI function for mobile phone connection and real-time viewing
- Magnetic attraction for versatile mounting
- One-click recording
- Gyro-stabilized camera stabilization
- Battery Power Supply (800mAh battery capacity, 4K recording duration approx. 150min with WIFI off)



5. Setup
5.1. Memory Card Installation and Removal
- Insert the TF card into the card slot as instructed, until it is secured.
- To remove the memory card, gently press it down until it pops out, then remove it.
Note:
- When using a TF card larger than 32GB, it is recommended that there be no other data on the TF card, as the camera will automatically format it to FAT32, resulting in data loss.
- Insert the TF card in the correct orientation. Inserting it backwards may damage the camera and the memory card.
- If the TF card is incompatible with the camera, please try inserting it again or use a different memory card.
- Please use a genuine Class 10 high-speed card.
5.2. Charging
Connect the camera to a power source using the provided USB cable. The red light will be on during charging and will turn off when fully charged.
5.3. Mobile App Installation and Connection
- **Download and install the APP:**
- iOS: Search for "SupCamPro" on the Apple App Store.
- Android (International): Search for "SupCamPro" on Google Play.
- Android (China): Download "SupCamPro" from your device's app store.
- In standby state, consecutively press the WIFI button twice to switch to WIFI mode. After connecting to WiFi, the green light remains on.
- **WIFI Mode Behavior:**
- **Without TF card:** The blue and green lights flash alternately. The camera vibrates once every three seconds. If there is no operation for three minutes, the camera will automatically shut down. After connecting to the APP, the blue light will flash, and the camera vibrates once every three seconds. The camera will not shut down after connecting to the APP.
- **With TF card:** After connecting to the APP, the blue and green lights remain on. The blue light flashes when recording video.
- Open the SupCam Pro App, click to add camera, select to set up Wi-Fi to connect. The Wi-Fi name begins with "H88-*******", and the password is "12345678".
- Choose to enter the camera for real-time operation within the app.
6. Operating Instructions
6.1. Power On/Off
- **Power On:** Press the power button. The product vibrates once, and the blue light is always on, indicating the camera is in standby state.
- **Power Off:** Long press the power button. The light goes off, and the camera shuts down.
6.2. Video Recording
- From standby state, short press the video button once. The product vibrates once, and the blue light flashes slowly to start recording.
- To stop recording, short press the video button once again. The product vibrates to save the document.
6.3. Photo Taking
Click the photo button within the SupCam Pro app once to take a photo.
6.4. Standby State
- **With TF card inserted:** In standby mode, the blue light remains on. The camera automatically shuts down after 3 minutes without any operation.
- **Without TF card:** In standby mode, the blue light flashes, and the camera vibrates every 3 seconds. After 3 minutes, the camera automatically shuts down.
- **After turning on WIFI:** The blue and green lights flash, and the camera vibrates once every 3 seconds. After 3 minutes, the camera automatically shuts down if not connected to the app.
6.5. Recording While Charging Mode
The camera will automatically power on when connected to a power source or car charger. Briefly press the record button to start video recording. When using recording while charging, please turn off the camera and save the file, and then disconnect the USB cable.
6.6. Connecting to Computer
- **U-Disk Mode:** After connecting the camera to the computer using a Type-C cable, you can play video files stored on the TF card and delete unnecessary files.
- **Webcam Mode:** Without a TF card, when connecting to the computer, the camera can be used as a webcam.
6.7. Parameter Settings (via Mobile App)
Access these settings through the SupCam Pro mobile application:
| Setting | Options |
|---|---|
| Video resolution | 4K/30, 2.7K/30, 1080/P30 |
| Video length | Off/1min/2mins/3mins/5mins/10mins |
| Video Loop Recording | Open/Close |
| Video encoding | H.264/H.265 |
| EIS (Electronic Image Stabilization) | Close/LDC/EIS |
| Anti-shake calibration | Cancel/Confirm |
| Video sound | Open/Close |
| Startup recording | Close/Open |
| Frequency | 50HZ/60HZ |
| Rotary Lock | Open/Close (Only in standby mode) |
| LED indicator light | Open/Close |
| Automatic shutdown | Close/3mins/5mins/10mins |
| Audio noise reduction | Close/Open |
| Date Stamp | Open/Close |
| Time format | Year/Month/Day, Month/Day/Year, Day/Month/Year |
| Format TF card | Cancel/Confirm |
| Reset factory setting | Cancel/Confirm |
7. Maintenance
7.1. General Care
- Keep the camera dry. Do not expose it to extreme temperatures or humidity.
- Avoid dropping or subjecting the camera to strong impacts.
- Store the camera in a clean, dust-free environment when not in use.
7.2. Cleaning
- Use a soft, dry cloth to clean the camera body.
- For the lens, use a specialized lens cleaning cloth and solution to avoid scratches.
- Ensure the waterproof case is clean and free of debris before underwater use to maintain its seal.
8. Troubleshooting
8.1. Camera cannot be turned on
- The battery is low on power. Please charge it promptly.
- Press the reset button to reset the camera and then turn it on again.
8.2. Battery can't be charged
- The charging indicator light is not on, meaning the charger is not properly plugged in. Please check if the charger is connected correctly.
8.3. Memory card cannot be recognized
- Please check if the TF card is at least Class 10, with a maximum size of 256GB.
- Please check if the TF card is inserted backwards.
- When using a TF card on the camera for the first time, it is recommended to format it first.
8.4. Video has no image stabilization
- Check if the image stabilization setting in the app is enabled.
8.5. Product freezes or cannot operate normally
- Press the reset button to automatically reset and restart the device.
9. Specifications
| Feature | Specification |
|---|---|
| Brand Name | JETO |
| Model Number | JT-88 |
| Model Name | 4K Anti-Shake |
| Type | Mini Action Camera |
| High Definition Support | 4K |
| Sensor Technology | CMOS |
| Camera Stabilization | Gyro-stabilized, Electronic Image Stabilization |
| Memory Card Type | MicroSD / TF (Max 256GB, Class 10 recommended) |
| Built-in Memory Size | Non |
| Power Supply Method | Battery Power Supply |
| Battery Capacity | 800mAh |
| Recording Duration (4K, WIFI Off) | Approx. 150 minutes |
| Product Size | 64.5mm x 28mm x 20mm |
| Product Weight | 36g / 1.27oz |
| Waterproof Depth | 30M (with waterproof case) |
| Connectivity | WIFI (2.4GHz) |
| Fuselage Opening | 1/4 (for mounting) |
| Certification | CE, FCC |
| Origin | Mainland China |
10. User Tips
- Maximize Battery Life: To extend recording time, especially for longer activities, consider turning off Wi-Fi when not actively using the app for live view or settings adjustments.
- Optimal Stabilization: Ensure EIS (Electronic Image Stabilization) is enabled in the app settings for the smoothest footage, particularly during high-motion activities like cycling or skiing.
- Versatile Mounting: Experiment with the magnetic pendant, back clip, and various mounts (helmet, bicycle) to capture unique perspectives and hands-free footage. The 360° rotating clip offers great flexibility.
- Aspect Ratio Switching: Utilize the camera's ability to instantly switch between 16:9 (for YouTube/TV) and 9:16 (for TikTok/Reels) to suit your content platform needs.
- Underwater Adventures: Always ensure the waterproof case is properly sealed and tested before taking the camera underwater to prevent damage.
11. Warranty and Support
For detailed warranty information and customer support, please refer to the official JETO website or contact your retailer. You can also find additional resources and the full user manual in PDF format at the following link: User Manual (PDF).
12. Product Video
Watch this video for a visual guide on the JETO JT-88 4K Anti-Shake Action Camera's features and usage: