SP530E/SP630E All-in-One LED Controller User Manual

1. Introduction

The SP530E and SP630E are versatile IoT LED controllers designed for managing various types of LED lighting. Both models support RF remote control for convenient operation.

SP530E: Features a dual-mode (2.4GHz WiFi and Bluetooth LE5.0) chip, allowing for control via Bluetooth, WiFi, local network, or cloud connection through a dedicated App. It also supports third-party voice control systems like Amazon Alexa and Google Home.
SP630E: Utilizes a single-mode (Bluetooth LE5.0) chip, enabling Bluetooth connection via the App.

These controllers offer extensive potential for customizing lighting and ambiance, providing an intelligent, convenient, and personalized user experience.

2. Key Features

Multiple Control Methods: Supports App control (iOS/Android), 2.4G RF remote control, and 2.4G touch 86-type control panel. SP530E additionally supports smart speaker voice command control (e.g., Amazon Alexa, Google Home).
Advanced Music Effects: Features newly upgraded music effects, including multi-segment LED strip music effects and Matrix LED music spectrum effects. Users can configure multiple segments with different music effects, pixel counts, and audio frequency ranges. Matrix LED effects allow flexible configuration of size, wiring, and parameters like color palette, saturation, and direction.
Versatile Music Capture: Supports three music capture modes: phone microphone, player streaming, and on-board microphone.
Broad LED Compatibility: Compatible with up to 12 different types of LED strips, including PWM (without IC) and SPI (with IC) LED strips, as well as mixed LED strips.
Customizable Settings: Supports power on/off dynamic effects, timer settings, playful on/off triggering settings, and default power-on status configuration.
App Functionality: The App features 5 major control pages: Dynamic, Static, Music, Custom, and Settings, with content adapting to the selected LED type.
Firmware Updates: Supports OTA (Over-The-Air) firmware upgrades to keep the device in its optimal state.
Cloud Integration (SP530E): Integrated with "BanlanX" Cloud for stable IoT smart home cloud connections.
Zone Control: Remote controls and 86-type control panels can be set up for zone-control (divisible into 4 zones) or unified control (ALL).

3. Specifications

Attribute	Value
Input Voltage	DC 5-24V
PWM Single Channel Max Output Current	6A
PWM Total Max Output Current	12A
Max. Load Power	288W (at 24V)
Working Temperature	-10°C to 60°C
Working Current (SP530E)	20mA~85mA
Working Current (SP630E)	3mA~13mA
Controller Dimensions	78mm × 56mm × 20mm
Material	Plastic
Connection Mode	WiFi / Bluetooth / RF 2.4GHz (SP530E), Bluetooth / RF 2.4GHz (SP630E)
Controlled Method	WiFi / Bluetooth / RF 2.4GHz (SP530E), Bluetooth / RF 2.4GHz (SP630E)
Remote Distance	30m
Applicable Lights	LED Strip Lights
Certification	CCC, CE, FCC, ROHS
Warranty	2 years

Supported LED Strip Types:

PWM Single Color, PWM Dual White/CCT, PWM RGB, PWM RGBW, PWM RGBCCT, SPI Single Color, SPI Dual White/CCT, SPI RGB, SPI RGBW, SPI RGBCCT, SPI RGB+1CH PWM Single Color, SPI RGB+2CH PWM CCT.

Supported IC Chips (SPI):

WS2811, WS2812, WS2813, WS2814, WS2815, TM1804, TM1812, UCS1903, UCS1909, UCS1912, UCS2903, UCS2909, UCS2912, TM1829, TM1914A, GW6205, GS8206, GS8208 etc.

Supported PWM Chips (Without IC):

FCOB, SMD5050, 3014, 3528, 5730, 5630 etc. (2pin V+ V-, 3pin CCT V+ CW WW, 4pin RGB V+ R G B, 5pin RGBW V+ R G B W, 6pin RGBCCT V+ R G B CW WW).

Maximum IC Quantity Supported:

SP530E: SPI DIM: 1200 IC max, SPI CCT: 1200 IC max, SPI RGB: 1200 IC max, SPI RGBW: 900 IC max, SPI RGBCCT: 600 IC max.
SP630E: SPI DIM: 600 IC max, SPI CCT: 600 IC max, SPI RGB: 600 IC max, SPI RGBW: 450 IC max, SPI RGBCCT: 300 IC max.

4. Setup Guide

4.1. Unboxing and Inspection

Carefully unbox your LED controller and accessories. Inspect all components for any signs of damage. If any parts are missing or damaged, please contact customer support.

4.2. Wiring the LED Controller

Different types of LED strips correspond to specific output ports on the controller. Ensure the ports match your selected LED type. Refer to the wiring diagrams and tables below for correct connections.

Wiring diagram for various LED strips and controller connections — **Figure 1: Detailed Wiring Diagram for SPI and PWM LED Strips.** This diagram illustrates how to connect different types of LED strips (WS2812B, WS2815, WS2813, COB CCT, COB RGB for SPI; COB SINGLE COLOR, COB CCT, COB RGB, 5050 RGBW, 5050 RGBCCT for PWM) to the SP530E controller, showing the specific pin configurations (VCC, R, G, B, CW, WW, DAT, GND) for each type. The image also shows the SP530E controller, the BanlanX app interface, and compatible voice assistants like Alexa and Google Assistant, along with various remote controls.

Wiring table and LED Type Setting table — **Figure 2: Wiring and LED Type Setting Tables.** This image presents two tables: one detailing the output port connections (VCC, R, G, B, CW, WW, DAT, GND) for 12 different LED types (1CH PWM Single Color to SPI RGB+2CH PWM CCT), indicating which pins are used for each type. The second table shows the parameter settings (RGB, CW, WW) for each of the 12 LED types, using icons to represent PWM, IC, or unused parameters.

4.3. App Installation

The controller supports App control for both iOS and Android devices. For Apple devices, iOS 10.0 or higher is required. For Android devices, Android 4.4 or higher is required.

Search for "BanlanX" in the App Store (iOS) or Google Play (Android).
Alternatively, scan the QR code provided on the product packaging or in the manual to download and install the App.

4.4. Device Pairing

Once the App is installed:

Open the "BanlanX" App.
Click the "+" icon in the top right corner of the home page to add a new device.
Follow the on-screen prompts to connect your controller. You may need to set the LED type and calibrate the color order during this process. These settings can also be adjusted later in the App's settings page.

5. Operating Instructions

Video 1: SP530E/SP630E Controller Overview and App Functions. This video demonstrates the wiring process for the LED controller, showcases various App control interfaces including dynamic effects, static colors, music modes, and DIY settings, and illustrates the diverse lighting effects achievable with different LED strip types.

5.1. App Control

The "BanlanX" App provides comprehensive control over your LED lighting. After pairing your device, you can access various control pages:

Dynamic: Explore a range of pre-set dynamic lighting effects like Rainbow, Comet, Red Wave, Purple Breath, and Gradient.
Static: Select a solid color from a color wheel or choose from saved colors.
Music: Engage music-reactive lighting modes. You can select different strip music modes or matrix music modes.
DIY: Create and customize your own lighting effects by setting colors, brightness, and speed.

To access settings, click the gear icon in the upper right corner of the App. Here you can:

Rename the device.
Modify the LED type.
Calibrate the color order.
Set timers for automatic on/off.
Configure on/off effects.
Adjust music effect layouts (Strip or Matrix, with matrix size options).

App, RF remote, and Voice control options — **Figure 3: Multiple Control Options.** This image displays the various ways to control the LED controller: via the mobile App (showing a color selection interface), a 2.4G RF Touch Remote, a 2.4G Touch Wall Mounted Smart Panel Control (both purchased separately), and third-party voice control systems like Amazon Alexa and Google Home (voice control is only available for the SP530E model).

Smartphone 4G/5G Control at Any Time and Any Place — **Figure 4: Remote Smartphone Control.** This image illustrates the convenience of controlling the LED lighting system from anywhere using a smartphone with 4G/5G connectivity, showing scenarios in both an office and a home environment.

5.2. Remote Control (2.4G Touch Remote / Panel)

The controller is compatible with 2.4G touch remotes (RB1, RB2, RB3, RB4) and 86-type touch panels (RC1, RC2, RC3, RC4). These remotes and panels can be used for zone control (up to 4 zones) or unified control (ALL).

Button Function Diagram for remotes — **Figure 5: Remote Button Functions.** This diagram details the functions of the buttons on the RB4 and RC4 remote controls. It explains short press and long press actions for ON/OFF, MODE, SPEED, MUSIC, ALL, and specific zone selection (1-4). It also illustrates how to adjust brightness (25%, 50%, 75%, 100%), and select color HUE/temperature using the color rings.

Binding/Unbinding: Within 20 seconds after powering on the controller, long press the ON key on the remote/panel to bind or unbind it.
Zone Setting: Within 20 seconds after powering on, long press a specific zone button (1-4) or the ALL button on the remote/panel to set the controller to that zone.

5.3. Voice Control (SP530E Only)

The SP530E model supports integration with popular voice control systems such as Amazon Alexa and Google Home. This allows you to control your LED lights using simple voice commands.

Voice control supported with Alexa and Google Home — **Figure 6: Voice Control Compatibility.** This image highlights the voice control capabilities of the SP530E controller, showing compatibility with Amazon Alexa, Google Assistant, Tmall Elf, Baidu Xiaodu, and Xiaomi Xiao Ai. An example voice command, "Hi, Alexa Turn the lights on for me," is displayed, emphasizing that voice control is exclusive to the SP530E model.

To enable voice control, link your "BanlanX" account with your Amazon Alexa or Google Home app and follow their respective setup instructions.

5.4. Music Lighting Effects

Experience dynamic lighting synchronized with your music. The controller offers:

Multi-segment LED Strip Music Effects: Configure different music effects on various segments of the same LED strip, each with unique pixel counts and tailored to low, mid, or high audio frequencies.
Matrix LED Music Spectrum Effects: Customize the size and wiring layout of your LED matrix, setting parameters for falling dots and sound columns (color palette, saturation, direction) for unique visual displays.

Newly Upgraded Music Effects — **Figure 7: Enhanced Music Effects.** This image showcases the newly upgraded music effects, featuring both multi-segment LED strip music effects and Matrix LED music spectrum effects. It also highlights the various music collection methods: player streaming, mobile microphone, and a built-in microphone.

5.5. Timer Function

Set schedules for your lights to turn on or off automatically. This is ideal for daily routines, such as waking up or going to sleep.

Support Timer Function — **Figure 8: Timer Functionality.** This image demonstrates the timer function, allowing users to schedule their lights to turn off at a specific time (e.g., Sleep PM 11:00) and turn on at another (e.g., Wake up AM 6:30).

5.6. Group Setting & Control

Manage multiple controllers simultaneously by grouping them. This allows you to control lights in different areas or rooms with a single command.

Group Setting & Group Control — **Figure 9: Group Control Feature.** This image illustrates the group setting and control capability, showing a floor plan divided into multiple zones (Zone1, Zone2, Zone3, Zone4). Each zone contains one or more LED controllers, all of which can be controlled simultaneously using a single remote or smart panel.

6. Maintenance

Cleaning: Use a soft, dry cloth to clean the controller. Do not use liquid cleaners or aerosol sprays.
Environment: Keep the device in a dry environment, away from direct sunlight, high temperatures, and humidity.
Power: Always disconnect power before performing any maintenance or wiring changes.

7. Troubleshooting

Controller Not Responding: Check all power connections to ensure they are secure. Verify that the input voltage is within the specified DC 5-24V range.
App Connection Issues: For SP530E, ensure both WiFi and Bluetooth are enabled on your smartphone and the controller. For SP630E, ensure Bluetooth is enabled. Try restarting the App and the controller.
Remote Control Not Working: Ensure the remote is properly bound to the controller (long press ON key within 20s of power-on). Check the remote's battery.
Incorrect Colors/Effects: Verify that the correct LED type is selected in the App settings. Perform color order calibration if colors appear incorrect.
LED Strip Not Lighting Up: Double-check the wiring connections between the controller and the LED strip, ensuring polarity is correct. Confirm the LED strip itself is functional.

8. User Tips

Always ensure all wiring is correctly connected and secured before applying power to prevent damage to the controller or LED strips.
When setting up complex music effects or matrix layouts, experiment with different parameters in the App to achieve your desired visual outcome.
For optimal voice control performance (SP530E), ensure your controller is within range of your smart speaker and has a stable WiFi connection.

9. Warranty and Support

This product comes with a 2-year warranty from the date of purchase. For technical support, troubleshooting assistance, or warranty claims, please refer to the seller's contact information or the official "BanlanX" website.

For additional information and documents, you may refer to the User Manual (PDF).

	SP530E / SP630E All-In-One IoT LED Controller: Features, Specs, and Instructions Comprehensive guide to the SP530E and SP630E All-In-One IoT LED Controllers. Learn about features, supported LED types, app control via BanlanX, 2.4G remote compatibility, technical specifications, and wiring diagrams.
	BTF-LIGHTING FCOB WS2812B SPI RGB IC LED Strip User Manual User manual for the BTF-LIGHTING FCOB WS2812B SPI RGB IC LED Strip, detailing product parameters, installation, precautions, and controller compatibility for optimal lighting setups.
	FCOB SPI RGBCCT LED Strip User's Manual User's manual for the FCOB SPI RGBCCT LED Strip, detailing product parameters, installation, precautions, and connection methods for various applications.
	Controlador SP530E: Guía de Características, Dimensiones y Aplicación BanlanX Información detallada sobre el controlador LED SP530E de SiLed, incluyendo sus características técnicas, dimensiones, diagramas de conexión, combinaciones de LED y cómo usar la aplicación BanlanX para control.
	BTF-LIGHTING FCOB WS2812B SPI RGB IC LED Strip User Manual User manual for BTF-LIGHTING FCOB WS2812B SPI RGB IC LED Strip. Details product specifications, precautions, controller and power supply recommendations, wiring diagrams, installation instructions, and professional lighting solutions.

All in One LED Controller SP530E/SP630E