CARABC NTG4.5

Contents

CARABC Wireless CarPlay Android Auto Navigation Module User Manual

For Mercedes Benz NTG4.5 Becker System

1. Introduction

This manual provides detailed instructions for the installation, operation, and troubleshooting of your CARABC Wireless CarPlay Android Auto Navigation Module. This module is designed to integrate seamlessly with your Mercedes Benz vehicle equipped with the NTG4.5 Becker system, enhancing your driving experience with modern connectivity features.

2. Function Description

The CARABC module offers a range of features to upgrade your in-car entertainment and navigation:

  • Apple CarPlay: Built-in vehicle machine interaction system for iPhone, providing voice command, phone control, information, navigation, music, and Siri interaction. Supports wireless connection.
  • Android Auto: Original ecological Android car-machine interaction system developed by Google, offering voice control for phone, information, navigation, and music. Supports wireless connection.
  • Airplay: Supports wireless mirroring functions for iPhone.
  • USB Music: Online music playback function, directly insert a U disk for music.
  • Reversing Video Input: The smart module can decode video and can be equipped with rear-view video input (CVBS/AHD).
  • Advanced Chip: Equipped with an advanced 5GHz chip for stable performance.
  • Bluetooth Calling: Supports original car Bluetooth call function.
  • Audio EQ Adjustment: Music and navigation volume can be adjusted separately.
  • Original Car MIC Support: Utilizes the pre-installed car microphone.
  • Wired Baidu Car Life: Supported (requires activation in factory settings with password: 0301).
Diagram showing various features like Wireless Android Auto, Wireless CarPlay, Call Phone, Voice Control, USB Flash Play, Reverse and Front Camera, Online Music, Screen Mirroring.

Figure 2.1: Overview of module features

3. Product List

The product package typically includes the following components:

  • Smart Box (Main Module)
  • Wire Harness (Optional cables for AUX, USB, Camera)
Image of the Smart Box module

Smart Box

Image of the wire harness with USB, AUX, and camera connectors

Wire Harness

4. Specifications

AttributeValue
ModelBC01
Operating Temperature-30~+75℃
Stored Temperature-30~+85℃
Environment Humidity≤98% (at 45℃), 65±5% (rated)
Power Consumption1A (rated), 3A (Max)
Shutdown Current300mA (Clock is on)
Static Currentless than 3mA
Operating Voltage5V
Charging Current≤2A, when the USB charging current >1A, the host should activate the circuit protection function to control the current below 1.5A, to avoid burning the product.

5. Installation

5.1 Compatibility Check

This module is compatible with Mercedes Benz A, B, C, E, CLA, GLA, GLK, ML, and Sprinter models equipped with the NTG4.5 Becker system. Before installation, please confirm your car has a Becker slot/harness in the glove box.

Compatible Model List for Mercedes Benz NTG4.5 system

Figure 5.1: Compatible Model List

5.2 Installation Steps (Plug and Play)

The CARABC module is designed for plug-and-play installation, requiring no complex wiring or modifications. Ensure your car is turned off before beginning installation.

  1. Locate the Becker Slot: Open the glove box in front of the passenger seat. Identify the Becker slot, which may contain an existing Becker Map Pilot module.
  2. Remove Existing Module (if applicable): If a Becker Map Pilot module is present, gently pull it out from the slot.
  3. Insert the Smart Box: Insert the CARABC Smart Box into the Becker slot. Ensure it is fully seated and secure.
  4. Connect Wire Harness (Optional): If you plan to use additional features like reversing camera, external USB, or AUX input, connect the provided wire harness to the Smart Box and route the cables as needed.
Diagram showing the NTG4.5 system, Becker slot location, and steps to insert the module.

Figure 5.2: Installation into Becker Slot

Easy installation steps: 1. Insert item into Shell slot, 2. Connect with Smartphone, 3. Enjoy.

Figure 5.3: Simplified Installation Overview

5.3 Installation Video

Video 5.1: Unboxing and Installation Demonstration

Video 5.2: Detailed Installation Guide

6. Connection Diagram

Connection diagram showing USB, AUX, Reversing Video, and 12V+ ACC inputs

Figure 6.1: Module Connection Diagram

The module features several connection points:

  • USB Expansion: Connect to a mobile phone or U disk for software upgrades and multimedia playback.
  • Original Car AUX: Connect to the original car's AUX input for audio transmission.
  • Reversing Video Input: For connecting a rear-view camera.
  • 12V+ ACC: Power connection.

6.1 DIP Switch Settings

DIP switch on the module with labels 1 and 2

Figure 6.2: DIP Switch for Audio Bluetooth

  • Dial 1: Used to turn on/off the audio Bluetooth.
  • Dial 2: This dial is invalid and has no function.

7. Operation

7.1 Control Key Operations

The module supports control via the original car's steering wheel buttons and central knob:

Diagram of steering wheel controls and central knob for operation

Figure 7.1: Control Key Operations

  • Voice Button: Activates voice commands (e.g., Siri).
  • End Calls: Press to end a call.
  • Answer Calls: Press to answer a call.
  • Long Press (2s) for Previous/Next Song: Use the appropriate buttons to switch tracks.
  • Knob Operation: Use the central knob for navigation and selection within the CarPlay/Android Auto interface.
Diagram showing car radio buttons and their functions for module control

Figure 7.2: Car Radio Button Functions

7.2 Bluetooth Audio Connection

There are two methods for Bluetooth audio connection. Choose one method, as they cannot be used simultaneously.

Method 1: Via Original Car Host

  1. Step 1: Open the Bluetooth audio settings of the original car host and select "Connect via BT audio device".
    Screenshot of car display showing 'Search for BT audio devices' and 'Connect via BT audio device'

    Figure 7.3: Step 1 - Select BT Audio Device

  2. Step 2: The system will display "Ready for Bluetooth connection".
    Screenshot of car display showing 'Ready for Bluetooth connection'

    Figure 7.4: Step 2 - Waiting for Connection

  3. Step 3: A connection request will pop up. Click "Yes" to authorize.
    Screenshot of car display showing 'Do you want to authorise CARABC-BT?'

    Figure 7.5: Step 3 - Authorize Connection

  4. Step 4: A pairing request with a passkey will appear. Click "Yes" to confirm.
    Screenshot of car display showing 'Does the passkey match the passkey on CARABC-BT?'

    Figure 7.6: Step 4 - Confirm Passkey

Method 2: Via Phone's Bluetooth

  1. Step 1: Go to Settings > Sound on the car display and turn on the relevant button (P2 in the manual's diagram).
    Screenshot of car display showing 'Settings' menu with 'sound' selected

    Figure 7.7: Step 1 - Car Settings Sound

    Attention:

    • If you cannot open the button, disconnect CarPlay and try again.
    • Turning the button on or off may restart the device.
  2. Step 2: Use your phone's Bluetooth to search for and connect to the original car Bluetooth (the name may be "MB-Bluetooth").

Note: Bluetooth Audio Connection Method 1 and Method 2 cannot be used at the same time. If using Method 1, you need to turn off the button mentioned in Method 2, Step 1.

7.3 Wireless CarPlay Connection

  1. Step 1: On the car display, select "Bluetooth" from the main menu.
  2. Step 2: Check the Bluetooth Device name, which will start with "CAR-BT-xxxx".
  3. Step 3: On your iPhone, turn on Wi-Fi and keep it on. Then go back to Bluetooth settings and connect to the "CAR-BT-xxxx" device.
  4. Step 4: Select the Bluetooth Device name "CAR-BT-xxxx" and click "Pair". A request window will pop up to "Use CarPlay". Confirm to establish the connection.
Screenshot of CarPlay interface with various apps

Figure 7.8: CarPlay Interface

7.4 Wireless Android Auto Connection

  1. Step 1: On the car display, select "Bluetooth" from the main menu.
  2. Step 2: Check the Bluetooth name starting with "CAR-BT-xxx" in the Bluetooth system interface.
  3. Step 3: Click on the Bluetooth name beginning with "CAR-BT-xxx". A pairing request will pop up; click "Pairing". After successful Bluetooth pairing, your phone will prompt a request to enable the Android Auto option; confirm it.
  4. Step 4: Turn on the Android Auto app on your mobile phone, and the system will connect automatically.
Screenshots of Android Auto user interface examples

Figure 7.9: Android Auto User Interface

7.5 Apple Wireless Screen Mirroring (Airplay)

  1. Step 1: On the car display, select "Airplay" from the main menu.
  2. Step 2: On your iPhone, turn on Wi-Fi. Select the "Wireless LAN" option. The search bar will show "CAR-WIFI-XXX". Click the link, and enter the password: 66668888.
  3. Step 3: After the CarPlay Wi-Fi connection is successful, return to the main interface of your phone. Open the shortcut menu page, select "Screen Mirroring".
  4. Step 4: After "Screen Mirroring" is turned on on your mobile phone, select "Airplay" to complete the wireless screen mirroring.

8. Reverse Settings

You can configure the camera type for your reversing video input:

  1. Step 1: On the car display, click "Settings".
  2. Step 2: Go to "Settings" and tap "CameraType".
  3. Step 3: Enter "CameraType" and select either "After Market Camera" or "OE Camera" according to your installed camera type.
Screenshot of car display showing 'Settings' menu with 'System' selected

Figure 8.1: Step 1 - Click Settings

Screenshot of car display showing 'System' menu with 'CameraType' selected

Figure 8.2: Step 2 - Select CameraType

Screenshot of car display showing 'CameraType' options: NONE, After Market Camera, OE Camera

Figure 8.3: Step 3 - Choose Camera Type

9. Troubleshooting (FAQ)

  • Q: Why is my image not working?
    A: Please exit CarPlay, connect to your phone's Wi-Fi personal hotspot, and then turn on the screen projection mode on your phone.
  • Q: Is my car compatible?
    A: Please check if there is a wiring harness/slot in the glove box and confirm if your car system is NTG4.5. If both conditions are met, our products are compatible.
  • Q: iOS mirror connection method.
    A: When connecting to AirPlay with V0.012 versions, you need to first change the phone name to "iPhone" (note the capitalization). Then, create a personal hotspot with the password 12345678. Wait for the module to automatically connect to the hotspot, then use the phone to open the screen mirroring function and click on the mirror connection.
  • Q: The sound cannot be connected automatically, or there is no sound?
    A: When using passive Bluetooth connection, if you cannot connect by yourself, please delete the connection records between the car Bluetooth list and the mobile phone Bluetooth. Then, let the car connect to the Bluetooth of our product.
  • Q: When making a call, does the microphone use the one from the phone or the hands-free one from the car itself?
    A: The module supports the original car MIC (pre-installed MIC), so it should utilize the car's hands-free microphone.

For an audio adjustment video, please scan the QR code below with your browser:

QR code for audio adjustment video

10. User Tips

  • Initial Bluetooth Connection: Be patient during the initial Bluetooth connection process, as it may require a few attempts to establish a stable link.
  • System Stability: Once connected, the system generally works very well.

11. Warranty Terms

Thank you for choosing our product. Our products undergo strict functional and performance tests to ensure good condition before shipment. All products come with a one-year warranty.

11.1 Warranty Exclusions

The free warranty service does not cover the following conditions:

  • After the free warranty period, or if the appearance is scratched, dirty, or deformed.
  • The warranty card and purchase certificate are inconsistent with the product model or have altered marks.
  • The barcode of the host machine body is unclear or missing.
  • Failure to use, maintain, repair, or refit the product according to the requirements of this manual, resulting in damage.
  • Damage due to force majeure (such as fire, flood, traffic accident, lightning, earthquake, etc.).

© 2023 CARABC. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.