BIUBLE 1500A Car Jump Starter with 150PSI Air Pump User Manual

1. Introduction

Thank you for choosing the BIUBLE 1500A Car Jump Starter with 150PSI Air Pump. This multi-functional device is designed to provide emergency jump-starting for vehicles, inflate tires, and serve as a portable power bank and emergency light source. Please read this manual thoroughly before use to ensure safe and optimal performance.

2. Product Contents

Carefully unpack the box and ensure all items are present and in good condition. If any items are missing or damaged, please contact customer support.

Car Jump Starter Unit
Jumper Cables (Smart Clamps)
Inflatable Hose
Nozzle Adapters (x4)
USB Charging Cable
User Manual

Contents of the BIUBLE 1500A Car Jump Starter package — Figure 2.1: Product Package Contents (Car Jump Starter, Jumper Cables, Inflatable Hose, Nozzle Adapters, USB Charging Cable, User Manual)

3. Setup

3.1 Initial Charging

Before first use, fully charge the jump starter unit. Connect the provided USB charging cable to the unit's input port and a suitable USB power adapter (not included). The LED display will indicate the charging status and battery level. A full charge is recommended for optimal performance, especially for jump-starting.

4. Operating Instructions

4.1 Jump Starting a Vehicle

This device can jump-start vehicles with 12V batteries, including those with zero voltage. Ensure the jump starter is sufficiently charged before attempting to jump-start.

Insert the Battery Clip: Firmly insert the blue end of the jumper cables into the jump starter's dedicated jump-start port. Ensure a secure connection.
Connect Clips to the Engine Battery: Attach the red clamp to the positive (+) terminal of the vehicle's battery and the black clamp to the negative (-) terminal. Ensure the clamps make good contact with the battery terminals.
Start Your Engine: Once connected, the jump starter will automatically detect the battery. Start your vehicle's engine. If the engine does not start immediately, wait a few seconds and try again. Do not crank for more than 3 seconds per attempt.
Remove Cables: After the engine starts, immediately remove the jumper cables from the vehicle battery, then disconnect them from the jump starter unit.

Safety Precautions:

Do not touch the red and black clamps together.
Do not attempt to jump-start a frozen battery.
If the jump starter indicates an error, refer to the troubleshooting section.

Three-step guide for jump starting a car — Figure 4.1: Jump Start Steps (Insert battery clip, Connect clips to engine battery, Start engine)

Jump starter connected to a car battery, demonstrating zero voltage instant start — Figure 4.2: Zero Voltage Instant Start Capability

4.2 Using the Air Compressor / Tire Inflator

The integrated 150PSI air compressor can inflate tires and other inflatables. It supports PSI, BAR, and KPA units.

Connect the Hose to the Tire: Screw the inflatable hose onto the tire valve stem. Ensure it is tightly secured to prevent air leakage.
Preset Tire Pressure: Turn on the jump starter. Use the control buttons (usually '+' and '-' or mode button) to select the desired pressure unit (PSI, BAR, KPA) and set the target pressure. The large digital LED screen will display the current and target pressure.
Start Inflation: Press the inflation button to begin pumping. The device will automatically stop when the preset pressure is reached.
Disconnect Hose: Once inflation is complete, quickly unscrew the hose from the tire valve.

Jump starter inflating a car tire, highlighting 150PSI cordless tire inflator feature — Figure 4.3: 150PSI Cordless Tire Inflator in Use

Three-step guide for tire inflation — Figure 4.4: Inflation Steps (Connect hose, Preset pressure, Automatic stop)

4.3 Using as a Power Bank

The device features USB and Type-C output ports to charge your electronic devices.

Connect your device's charging cable to the appropriate output port on the jump starter.
The jump starter will automatically begin charging your device.

Jump starter charging a smartphone, demonstrating power bank functionality — Figure 4.5: Power Bank Functionality (Charging a smartphone)

4.4 Using the Flashlight / Emergency Light

The jump starter includes a built-in flashlight with multiple lighting modes for various situations.

Short Press the Light Button: Press the dedicated light button to cycle through the lighting modes: constant on, SOS signal, and warning light (strobe).
Press again to turn off the light.

Person using the jump starter's flashlight under a car hood — Figure 4.6: Flashlight and Emergency Light Modes

4.5 Understanding the LED Display

The large digital LED screen provides essential information about the device's status and operation.

Inflatable Unit: Displays the selected pressure unit (PSI, BAR, KPA).
Actual Value: Shows the current pressure reading during inflation.
Inflatable Mode: Indicates the type of item being inflated (e.g., car, motorcycle, bicycle, ball).
Default Value: Shows the preset target pressure.
Power: Displays the remaining battery level of the jump starter.

Close-up of the jump starter's LED screen showing various indicators — Figure 4.7: Digital LED Screen Indicators

5. Maintenance

5.1 Charging the Device

To prolong battery life, fully charge the jump starter every 3-6 months, even if not in use. Avoid storing the device with a completely depleted battery.

5.2 Storage

Store the device in a cool, dry place away from direct sunlight, moisture, and extreme temperatures. Keep it out of reach of children.

5.3 Cleaning

Wipe the unit with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners. Ensure all ports are free of dust and debris.

6. Troubleshooting

Device not turning on: Ensure the battery is charged. If it's fully charged and still not turning on, contact support.
Vehicle not jump-starting: Check that the jumper cables are securely connected to both the jump starter and the vehicle battery terminals. Ensure the battery terminals are clean. The vehicle battery might be severely damaged and require professional assistance.
Air compressor not inflating: Verify the inflatable hose is securely attached to both the device and the tire valve. Check if the target pressure is set correctly and if the device has sufficient charge.
Device not charging: Try a different USB charging cable and power adapter. Ensure the charging port is clean.

7. Specifications

Feature	Specification
Brand Name	BIUBLE
Peak Current	>1200 A
Voltage	12 V
Battery Capacity	> 30000 mAh
Conversion Rate	>90%
Number Of Built-in Batteries	4
Air Compressor Pump	Maximum Air Pressure 150PSI
Special Features	USB, Lighting, Warning Light, SOS Lighting, Power Bank, Portable Charger, Portable Power Station, Car Jump Starter
External Testing Certification	MSDS, ROHS, FCC, CE
Certification	UL, RoHS, MSDS, CE
Dimensions (H x W x D)	20.20 cm x 10.60 cm x 5.00 cm (7.95 in x 4.17 in x 1.96 in)
Weight	1.12 kg
Origin	Mainland China

Diagram showing the dimensions of the jump starter — Figure 7.1: Product Dimensions

8. User Tips

Always keep the jump starter charged above 50% for emergency readiness.
Store the device in your vehicle for easy access during emergencies.
Familiarize yourself with the LED display and control buttons before an emergency arises.
When inflating tires, always check the vehicle manufacturer's recommended tire pressure.
Ensure the jumper cable clamps are clean and free of corrosion for optimal conductivity.

9. Warranty and Support

For warranty information or technical support, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

	Lenercom Jump Starter & Air Pump Quick User Guide This guide provides detailed instructions for the Lenercom 4-in-1 Jump Starter and Air Pump, covering its features, operation, safety guidelines, and troubleshooting. Learn how to jump-start vehicles, use the air compressor, power bank, and LED light functions safely and effectively.
	GOOLOO A5 Jump Starter with Inflator User Manual User manual for the GOOLOO A5 Jump Starter with Inflator, featuring 4000A and 150PSI. Includes operation instructions, product highlights, technical specifications, safety warnings, and warranty information.
	GOOLOO A3 Jump Starter with Inflator User Manual \| Model JS-506 User manual for the GOOLOO A3 Jump Starter and Tire Inflator (Model JS-506). Covers jump-starting, tire inflation, power bank, LED flashlight, SOS light, safety, and operation instructions.
	BUVAYE All-in-One Jump Starter & Air Compressor User Manual Comprehensive user manual for the BUVAYE All-in-One Jump Starter and Air Compressor, detailing features, specifications, usage instructions, safety precautions, and troubleshooting for this portable automotive device.
	BiUBLE JS002 Car Jump Starter User Manual: Features, Operation, and Troubleshooting Get detailed information on the BiUBLE JS002 Car Jump Starter. This user manual covers package contents, key features, technical specifications, operating instructions, jump starting procedures, safety guidelines, care, maintenance, and troubleshooting tips.
	AstroAI S8 Air 1500A 150PSI Jump Starter with Air Compressor User Manual User manual for the AstroAI S8 Air, a versatile 1500A jump starter and 150PSI air compressor. Features include jumpstarting vehicles, inflating tires, acting as a power bank, and an emergency flashlight. This guide provides detailed instructions, safety warnings, troubleshooting tips, and product specifications.

BIUBLE 1500A Car Jump Starter Power Bank Portable 150PSI Air Pump