FGHGF 25008-nRF54L15

Contents

Nordic NRF54L15 Bluetooth Beacon User Manual

Model: 25008-nRF54L15

1. Introduction

The FGHGF 25008-nRF54L15 is a compact and efficient Bluetooth Beacon designed with Nordic nRF54L15 technology and a 3-axis accelerometer. This low-power IoT device is an excellent choice for various applications, including smart home integration, staff management, proximity information pushing, and indoor positioning in public and private environments. Users can easily configure the beacon via a dedicated mobile application. Free SDK and firmware information are available upon request for advanced development.

2. Features

  • Advanced Bluetooth Technology: Utilizes Nordic nRF54L15 for reliable and efficient wireless communication.
  • Integrated 3-Axis Accelerometer: Enables motion detection and enhanced tracking capabilities.
  • Ultra-Low Power Consumption: Designed for extended battery life, making it suitable for long-term deployments.
  • Compact and Portable Design: Weighing approximately 7g with a diameter of 30mm and thickness of 8.4mm, it is discreet and comfortable to wear or attach.
  • Sleek, Rounded Aesthetic: Modern and unobtrusive housing.
  • App-Configurable: Easy setup and customization through a user-friendly mobile application.
  • Versatile Applications: Ideal for smart home automation, personnel tracking, asset location, and proximity services.
  • Developer Friendly: Free SDK and firmware information provided for custom solutions.

3. Setup Guide

To begin using your 25008-nRF54L15 Bluetooth Beacon, follow these steps:

  1. Battery Installation: The beacon uses a coin cell battery. Carefully open the device (if applicable, or ensure battery is pre-installed) and insert the coin cell battery into the designated holder on the back of the circuit board. Ensure correct polarity.
  2. App Download: Download the official configuration application for the Nordic nRF54L15 Bluetooth Beacon from your device's app store (iOS/Android).
  3. Device Pairing: Open the application and follow the on-screen instructions to scan for and pair with your beacon. The app will guide you through the initial connection process.
  4. Initial Configuration: Once paired, use the app to set up the beacon's parameters, such as advertising intervals, transmission power, and any specific data broadcasting requirements for your intended application.
Back view of the 25008-nRF54L15 Bluetooth Beacon circuit board, featuring a coin cell battery holder.
Figure 3.1: Back view of the beacon showing the coin cell battery holder.

4. Operating Instructions

The 25008-nRF54L15 Bluetooth Beacon is designed for continuous operation once configured. Its primary functions revolve around broadcasting data for proximity detection, indoor positioning, and activity monitoring.

  • Proximity Detection: The beacon continuously broadcasts its unique identifier. Compatible devices (e.g., smartphones, gateways) within range can detect this signal, allowing for applications like location-based notifications or automated actions when entering/leaving a specific area.
  • Indoor Positioning: By deploying multiple beacons in an area, their signals can be used to triangulate or trilaterate the position of a receiving device, enabling precise indoor location tracking for assets or personnel.
  • Activity Monitoring: Leveraging its 3-axis accelerometer, the beacon can detect movement, orientation changes, and vibrations. This data can be transmitted to a central system for monitoring activity levels, detecting falls, or tracking the status of moving assets.
  • Configuration via App: Adjust operational parameters such as broadcast frequency, power levels, and data payload through the dedicated mobile application as needed.
Diagram illustrating application cases for the Bluetooth Beacon, including Activity Monitoring and Asset Location Tracking.
Figure 4.1: Illustrative diagram of beacon application cases.

5. Maintenance

To ensure optimal performance and longevity of your Bluetooth Beacon, consider the following maintenance guidelines:

  • Battery Replacement: When the beacon's performance degrades (e.g., reduced range, inconsistent broadcasting), it may be time to replace the coin cell battery. Refer to Section 3 for battery installation.
  • Cleaning: Keep the device clean and free from dust and debris. Use a soft, dry cloth for cleaning. Avoid using harsh chemicals or abrasive materials.
  • Environmental Conditions: Store and operate the beacon within its specified temperature and humidity ranges. Avoid exposure to extreme temperatures, direct sunlight, or high moisture environments.
  • Physical Inspection: Periodically check for any physical damage to the casing or circuit board.

6. Troubleshooting

If you encounter issues with your Bluetooth Beacon, try the following troubleshooting steps:

  • Beacon Not Detected:
    • Ensure the battery is correctly installed and has sufficient charge. Replace if necessary.
    • Verify that Bluetooth is enabled on your receiving device (e.g., smartphone, gateway).
    • Check if the beacon is within the effective range of the receiving device.
    • Restart the configuration application and try scanning again.
  • Inconsistent Data/Range:
    • Check for environmental interference from other wireless devices or large metal objects.
    • Ensure the beacon is not obstructed.
    • Verify the beacon's transmission power settings in the app; increase if appropriate.
    • Replace the battery if it's low.
  • App Connection Issues:
    • Ensure your app is updated to the latest version.
    • Clear the app's cache or reinstall it.
    • Restart your mobile device.

7. Specifications

FeatureSpecification
Model25008-nRF54L15
Brand NameFGHGF
Communication MethodBluetooth-Compatible
ChipsetNordic nRF54L15
Additional Sensor3-Axis Accelerometer
Power ConsumptionLow Power
ApplicationIoT Device for Smart Home, Staff Management, Proximity, Indoor Positioning
Dimensions (Diameter x Thickness)Approx. 30mm x 8.4mm (25.05mm diameter shown in diagram)
WeightApprox. 7g
MaterialPC
OriginMainland China
Front view of the 25008-nRF54L15 Bluetooth Beacon circuit board with a dimension overlay indicating a diameter of 25.05mm.
Figure 7.1: Beacon circuit board with approximate diameter measurement.

8. User Tips

No specific user tips are available at this time.

9. Warranty and Support

For warranty information, please refer to the terms and conditions provided at the time of purchase on the platform where the product was acquired. For technical support, inquiries regarding SDK, firmware, or any operational issues, please contact the seller directly through the platform's messaging system. Ensure you provide your product model (25008-nRF54L15) and a detailed description of your issue for efficient assistance.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.