1. Introduction
Thank you for choosing the MEKEDE Android 2 Din Car Radio. This multimedia player is designed to enhance your driving experience with advanced features like wireless CarPlay, Android Auto, GPS navigation, and a high-resolution touch screen. This manual provides essential information for installation, operation, maintenance, and troubleshooting to ensure optimal performance and safety.
2. Safety Information
- Read all instructions carefully before installation and use.
- Professional installation is highly recommended to avoid damage to the unit or your vehicle.
- Do not operate the device in a way that distracts you from driving. Always prioritize road safety.
- Ensure all connections are secure and properly insulated to prevent short circuits.
- Keep the device away from water, moisture, and extreme temperatures.
3. Package Contents
The package typically includes the following items. Please verify all components upon unboxing:
Head Unit
Power Cable & Canbus Box (model dependent)
RCA Cable, MIC, USB Cable, 4G Antenna (model dependent), GPS Antenna
Rearview Camera (Gift) & Disassembly Tools (Gift)
Note: Specific accessories may vary slightly depending on the exact model (e.g., MN-H2, X10, X20, M700S, M800S).
4. Installation
4.1 Pre-installation Check
- Ensure your vehicle is compatible with a Double Din head unit.
- Disconnect the vehicle's battery before starting installation.
- Verify all included components match the packing list.
4.2 Wiring Diagram
Refer to the following diagrams for proper wiring connections. Incorrect wiring can damage the unit or vehicle electronics.
Figure 1: M700S/M800S Main Unit Back Panel & Wiring Diagram
- A. Power cable: GND (-12VDC), ACC (Key Switch +12VDC), BACK (Reverse detecting line), KEY1 (Steering wheel control study -1), KEY2 (Steering wheel control study -2), ILL (Small lights detecting), B+ (+12VDC), ANT (ANT power +12VDC), FR+ (Front right speaker +), FR- (Front right speaker -), FL+ (Front left speaker +), FL- (Front left speaker -), RR+ (Rear right speaker +), RR- (Rear right speaker -), RL+ (Rear left speaker +), RL- (Rear left speaker -).
- B. RCA Cable
- C. 360° panoramic device
- D. Digital TV.CAN: (If your car needs canbus, please use cable connect this port)
- E. One USB interface
- F. Double USB interface
- G. Reverse video cable
- H. Radio
- I. 4G Card Slot
- J. GPS interface
- K. 4G+ wireless network interface
- L. Cooling fan
- M. COAXIAL Interface
- N. OPTICAL Interface
Figure 2: X10/X20 Main Unit Back Panel & Wiring Diagram
- A. Power cable
- B. RCA Cable
- C. Digital TV.CAN: (If your car needs canbus, please use cable connect this port)
- D. USB interface
- E. USB interface
- F. Reverse video cable
- G. GPS interface
- H. Radio
- I. 4G Card Slot
- J. 4G+ wireless network interface
- L. Cooling fan
Figure 3: MN-H2 Main Unit Back Panel & Wiring Diagram
- A. Power cable
- B. RCA Cable
- C. Digital TV.CAN: (If your car needs canbus, please use cable connect this port)
- D. USB interface
- E. USB interface
- F. Reverse video cable
- G. GPS interface
- H. Radio
- L. Cooling fan
4.3 Rear Camera Connection
To connect the rearview camera, follow these steps:
- Red cable ① connects to the reverse light's positive terminal ("+").
- Black cable ② connects to the reverse light's negative terminal ("-").
- Reverse detection cable ④ (brown and pink) connects to the red cable ③ extending from the video input cable.
- Cable ⑤ does not need to be connected.
4.4 Physical Installation
The head unit is designed to fit seamlessly into your Ford Focus, Mondeo, S-MAX, C-MAX, or Galaxy dashboard. Use the provided disassembly tools to carefully remove the original radio. Connect all necessary cables as per the wiring diagrams. Secure the new head unit in place. The images below show the typical appearance before and after installation:
Before and After Installation
5. Operating Instructions
5.1 User Interface (UI)
The device offers various UI themes and display options. You can customize the main menu screen according to your preference.
Figure 4: UI Display Collection
Figure 5: M700S/M800S Theme Interface (Daylight & Night Mode)
Figure 6: X10/X20 Theme Interface
Figure 7: MN-H2 UI Options (Over 50 UIs)
5.2 GPS Navigation
The unit features a built-in global positioning system for omni-directional map display, real-time traffic conditions, and accurate positioning. Supports various navigation apps like iGO, Sygic, Yandex, Google Maps, Waze, and AMAP.
Figure 8: GPS Navigation Interface
5.3 Multimedia Playback
Enjoy music and videos from USB flash drives or SD cards. Supports 1080P video format.
Video 1: Demonstration of Real-time Dynamic Window, Music Playback, DSP Equalizer, FM/AM Radio, Bluetooth Hands-free, Bluetooth Music, CarPlay, DVR, Reversing Camera, Steering Wheel Control, Video Playback, and Split Screen functionality.
5.4 Bluetooth Functionality
The built-in smart Bluetooth system supports mobile phone pairing, hands-free dialing, and syncing phonebook contacts for safe driving.
Figure 9: Bluetooth Phone and Music Interface
5.5 Wireless CarPlay & Android Auto
The head unit comes with built-in wireless CarPlay (for iOS) and Android Auto (for Android systems), eliminating the need for additional accessories.
- Connection Steps:
- Connect your phone via Bluetooth.
- Select "Car Lin-K" on the head unit and wait for connection.
- Both CarPlay and Android Auto can also be connected via USB cable.
Figure 10: Wireless CarPlay and Android Auto Connection Guide
5.6 Steering Wheel Control (SWC)
The head unit supports your vehicle's original steering wheel controls for music and hands-free calling. If your steering wheel lacks control buttons, an optional Bluetooth SWC can be purchased.
To program SWC: Navigate to Settings > Factory Settings > Enter Password > Select Car Protocol Options (CAN BUS) > Select your CAN BUS type > Car model > Year. Then, in the SWC learning interface, press and hold the desired button on the steering wheel until the unit recognizes it.
Figure 11: Steering Wheel Control Interface
5.7 DSP Equalizer Adjustments (M700S, M800S models)
Increase DSP digital audio processing module multi-dimensional surround lossless sound effects for a high-definition audio-visual experience. Adjust equalizer settings, surround space, bass enhancement, and bass filter.
Figure 12: DSP Equalizer Adjustments
5.8 Split Screen and Picture-in-Picture (PIP)
Supports two applications displayed on the screen simultaneously for convenient multitasking. Also supports video and DVR applications in Floating Window mode.
Figure 13: Split Screen and PIP Functionality
5.9 4G LTE & WiFi
Built-in 4G modules allow you to stay connected to fast cellular data networks. You can also use the WiFi function to connect to your phone's hotspot or other WiFi networks. Note: MN-H2 model only supports WiFi, not 4G LTE.
Figure 14: Built-in 4G LTE and WiFi
5.10 Intelligent Day/Night Mode
The system automatically adjusts the screen's brightness and color for optimal visibility during day and night, reducing glare and eye strain.
Figure 15: Intelligent Day/Night Mode
5.11 Vehicle Status Display
The unit can display real-time vehicle information such as door open/close status and light switch status, provided your car has a compatible CANBUS box. Low-end cars without a CANBUS box may not support this function.
Figure 16: Display Door and Light Switch Status
5.12 Customization
Customize your car's color and license plate display on the unit's interface.
Figure 17: Customize Car Color and License Plate
5.13 Optional Features (Additional Accessories Required)
- OBD II Support: Monitor real-time data and fault codes from your vehicle's computer (OBDII module not included).
- ADAS Function: Advanced Driver-Assistance Systems, including vehicle collision warning (DVR not included).
- TPMS Support: Monitor tire pressure and temperature (TPMS sensors not included).
- AI Voice Control: Requires purchase of an activation code.
- DAB+ Support: Digital Audio Broadcasting (DAB+ module not included).
- AV-OUT Support: The video output can display content on headrest displays via a video cable (accessories not included).
Figure 18: OBD II Support
Figure 19: ADAS Function (Vehicle Collision Warning)
Figure 20: TPMS Support
Figure 21: AI Voice Control
Figure 22: DAB+ Radio
Figure 23: AV Output (Optional)
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the screen and exterior. Avoid abrasive cleaners or solvents.
- Software Updates: Periodically check for software updates from the manufacturer's website or through the device's settings to ensure optimal performance and access to new features.
- Reset: If the device becomes unresponsive, locate the small reset button (RST) on the front panel (refer to Figure 1, 2, or 3) and press it gently with a non-metallic pointed object.
7. Troubleshooting
- Q: The radio does not start.
-
- Check CAN BUS: If your vehicle uses a CAN BUS system, ensure it is correctly connected.
- Power Connections: Verify that the ACC and 12V wires are connected to the positive 12V power supply of the car, and the ground wire is connected to the negative pole. You can test these connections with an electricity meter.
- Internal Connections: The connection cables inside the radio might have come loose during transit. Carefully open the back cover and reconnect any detached cables.
- If the issue persists, provide a video showing the power connections and voltage test for further assistance.
- Q: The steering wheel controls are not working.
-
- Check CAN BUS: Ensure the CAN BUS is properly connected.
- Configure in Settings: Go to Settings > Factory Settings (password: 8888 or 3368) > Car Protocol Options (CAN BUS). Select your specific CAN BUS type, car model, and year.
- Learning State: Follow the on-screen instructions to enter the steering wheel control learning state and program each button.
- Q: How do I access factory settings?
- The factory password is 8888 or 3368.
- Q: Why is 4G LTE not working on my MN-H2 model?
- The MN-H2 model only supports WiFi functionality and does not have built-in 4G LTE capabilities.
8. Specifications
Below is a general overview of the technical specifications. Specifics may vary by model variant.
Figure 24: Configuration Parameters by Model
| Feature | MN-H2 | X10 / X20 | M700S / M800S |
|---|---|---|---|
| Operating System | Android 14 | Android 14 | Android 14 |
| Core | 4-Core | 8Core * 1.6Ghz UIS8581A | 8Core * 2.0Ghz 64 Bit Unisoc UIS7862S (2*Cortex A75+6*Cortex A55 12NM) |
| RAM / ROM | 2+32 GB | 2+32 GB / 4+64 GB | 8+128 GB / 8+256 GB |
| Car-Play + Auto | Wireless | Wireless | Wireless |
| BT module | BT4.1 | BT5.0 | BT5.0 |
| Resolution | 1024*600 | 1280*720 | 1280*720 |
| Screen type | IPS | IPS | QLED |
| Cooling fan | YES | YES | YES |
| AMP IC | YD7388 | Toshiba 001 / TOA7738 | TDA7851 |
| Radio Chip | MT6625LN | 4755 | 7708 |
| Full AV Output | Optional | Optional | Optional |
| DSP | No | EQ | Support |
| Voice Control | Optional (purchase activation code) | Optional (purchase activation code) | Optional (purchase activation code) |
| RDS | Support | Support | Support |
| PIP Split Screen | None | Support | Support |
| 3D Real-Time Dynamics | None | None | Support |
| Multicolor Button Light | None | None | Support |
| Supporting accessories (optional) | DVR / TPMS / OBD2 / DAB+ (Note: Accessories are not included and are purchased separately) | ||
General Specifications:
- Display Size: 7 inches (some models may feature larger screens up to 9 inches)
- Is touch screen: Yes
- Built-in Screen: Yes
- Din: Double Din
- Voltage: 12 V
- Digital Media Format: Mp3, MP4, WMA, JPEG
- OSD Language: Chinese (Simplified), Chinese (Traditional), Arabic, Polish, German, Russian, French, Finnish, Korean, Dutch, Czech, Latvian, Norwegian, Portuguese, Japanese, Slovak, Slovenian, THAI, Hebrew, Greek, Spanish, Hungarian, Italian, English
9. User Tips
- For optimal performance, ensure your vehicle's CAN BUS is correctly configured in the factory settings if applicable.
- If experiencing issues with steering wheel controls, remember to enter the 'learning state' to program the buttons.
- Consider purchasing optional accessories like an OBDII module or TPMS for enhanced vehicle monitoring and safety features.
- Regularly check for software updates to benefit from new features and improvements.
- If you encounter any issues, double-check all wiring connections before contacting support.
10. Warranty and Support
MEKEDE products typically come with a 3-year warranty. For specific warranty details and support, please refer to the official MEKEDE website or contact your seller. Ensure you retain your proof of purchase for warranty claims.
Manufacturer: Shenzhen Mekede Technology Co., Ltd. (also operates under the NaviFly brand).