1. Introduction
The Hoomc DT263W-B Wireless HDMI Transmitter and Receiver Kit is designed to wirelessly project content from smart devices such as computers, tablets, laptops, and Macs to larger displays like HD TVs, monitors, and projectors. This kit supports 4K30Hz resolution and offers stable, low-latency transmission up to 150 meters. It is ideal for various applications including large screen viewing, gaming, live streaming, and conference presentations.

2. Package Contents
Please check the package contents upon unboxing to ensure all items are present:

- Wireless Extension Receiver (1 Pc)
- Wireless Extension Transmitter (1 Pc)
- SMA Antenna (4 Pcs)
- USB-A to Type-C Cable (2 Pcs)
- Power Adapter (2 Pcs)
- Warranty Card + User Manual (1 Set)
3. Interface Specifications
Familiarize yourself with the ports and indicators on both the Transmitter and Receiver units:

Transmitter
- HD Signal Input: Connects to the HDMI source device.
- External Battery Indicator: Shows battery status.
- External Battery Power Button: For managing external battery power.
- System Status Indicator:
- ON: System working normally.
- Flashing: System working abnormally.
- Power Adapter Input Interface: For connecting the DC 5V power adapter.
- Function Button:
- (1) Short press the button to stop or mirror.
- (2) Long press for 5 seconds to pair with the receiver.
Receiver
- HD Signal Output: Connects to the HDMI display device.
- External Battery Indicator: Shows battery status.
- External Battery Power Button: For managing external battery power.
- System Status Indicator:
- ON: System working normally.
- Flashing: System working abnormally.
- Power Adapter Input Interface: For connecting the DC 5V power adapter.
- Function Button:
- (1) Short press the button to stop or mirror.
- (2) Long press for 5 seconds to pair with the transmitter.
4. Setup Guide
The DT263W kit is designed for plug-and-play operation, requiring no driver installation or complex setup. Follow these steps for a quick and easy setup:
4.1 Basic Connection (1-to-1)
- Connect Transmitter: Plug the HDMI output of your source device (e.g., camera, laptop) into the HD Signal Input port of the DT263W Transmitter.
- Connect Receiver: Plug the HDMI input of your display device (e.g., TV, projector) into the HD Signal Output port of the DT263W Receiver.
- Power On: Connect the provided power adapters to both the Transmitter and Receiver units, then plug them into a power source. Alternatively, use compatible external batteries (F970, F750, F550) for portable power.
- Antenna Installation: Screw the four SMA antennas onto their respective ports on both the Transmitter and Receiver.
- Pairing: The units should automatically pair. If not, long-press the Function Button on both the Transmitter and Receiver for 5 seconds to initiate pairing. The System Status Indicator will show normal operation (solid ON) once connected.
- Verify Display: Ensure your display device is set to the correct HDMI input. The content from your source device should now be mirrored wirelessly.

4.2 Multiple Transmitters to One Receiver Setup
The DT263W supports connecting multiple transmitters to a single receiver, allowing for easy switching between different source devices.
- Connect Multiple Transmitters: Connect each source device (e.g., multiple laptops) to its own DT263W Transmitter unit via HDMI. Power on all transmitters.
- Connect Single Receiver: Connect the single DT263W Receiver unit to your display device via HDMI. Power on the receiver.
- Pairing: Pair each Transmitter with the Receiver by long-pressing the Function Button on both units for 5 seconds. Ensure each Transmitter is paired individually.
- Switching Sources: To switch between active source devices, short-press the Function Button on the desired Transmitter. The Receiver will then display the content from that Transmitter.

4.3 Powering Options
The DT263W units can be powered using two methods:
- USB-C Power: Use the provided USB-A to Type-C cables and power adapters (DC 5V/1A) to power each unit.
- External Battery: The units support external F970, F750, F550 batteries for portable use. A 5000mAh battery can provide approximately 12 hours of usage.

4.4 Installation
The units feature an integrated cold shoe for quick and easy installation onto compatible camera rigs or other equipment.

5. Operating Instructions
Once set up, operating the DT263W is straightforward:
- Power On/Off: Connect/disconnect power or use the external battery power button.
- Mirror/Stop Transmission: A short press of the Function Button on either the Transmitter or Receiver will toggle between mirroring the display and stopping transmission.
- Switching Sources (Multiple Transmitters): If using multiple transmitters with one receiver, short-press the Function Button on the desired active Transmitter to switch the displayed source.
- Monitoring: The system status indicator provides visual feedback on the device's operational status.


6. Maintenance
To ensure the longevity and optimal performance of your Hoomc DT263W kit, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the exterior of the units. Avoid using liquid cleaners or solvents.
- Storage: Store the units in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
- Antennas: Ensure antennas are securely attached but do not overtighten. Handle them carefully to prevent damage.
- Cables: Inspect power and HDMI cables regularly for any signs of wear or damage. Replace damaged cables immediately.
- Ventilation: Ensure the units have adequate ventilation during operation to prevent overheating. Do not block ventilation holes.
7. Troubleshooting
If you encounter issues with your DT263W kit, refer to the following common problems and solutions:
- No Signal on Display:
- Ensure both Transmitter and Receiver are powered on and their System Status Indicators are solid ON.
- Verify all HDMI cables are securely connected to both the source and display devices.
- Check that the display device is set to the correct HDMI input.
- Try re-pairing the Transmitter and Receiver by long-pressing their Function Buttons for 5 seconds.
- Ensure the transmission distance is within the specified 150M range and there are no major obstructions.
- Test with different HDMI cables or source/display devices to isolate the problem.
- Poor Video Quality or Intermittent Signal:
- Reduce the distance between the Transmitter and Receiver.
- Minimize obstructions (walls, furniture) between the units.
- Check for potential interference from other 5Ghz wireless devices.
- Ensure antennas are properly installed and oriented.
- Verify the source device's resolution and refresh rate are compatible with the DT263W's maximum resolution (3840*2160@30Hz).
- Units Not Pairing:
- Ensure both units are powered on.
- Long-press the Function Button on both the Transmitter and Receiver simultaneously for 5 seconds until the System Status Indicator flashes, then release. They should attempt to pair.
- Move the units closer together during the pairing process.
- System Status Indicator Flashing Abnormally:
- This indicates a system working abnormally. Try power cycling both units.
- Check all connections. If the issue persists, contact customer support.
8. Specifications
| Feature | Specification |
|---|---|
| Type | WIRELESS HDMI |
| Brand Name | Hoomc |
| Origin | Mainland China, Guangdong |
| Material | Metal |
| Standards | HDMI 1.4; HDCP 1.4 |
| Maximum Pixel Clock | 340MHz |
| Maximum Data Rate | 10.2Gbps |
| Maximum Resolution | 3840*2160@30Hz |
| Connector | HDMI-A |
| Wireless Network | 5Ghz |
| Transmission Distance | ≤150M |
| Power Supply | The power adapter: DC 5V |
| Operating Temperature | -5℃ ~ +70℃ |
9. User Tips
- For optimal performance, ensure a clear line of sight between the Transmitter and Receiver.
- When using external batteries, monitor the battery indicator to avoid unexpected power loss during critical operations.
- If experiencing lag, try reducing the distance or ensuring minimal wireless interference.
- The "local HD video loop output" feature on the Transmitter can be useful for monitoring the source directly while transmitting wirelessly.
10. Warranty and Support
The Hoomc DT263W Transmitter and Receiver Kit comes with a 1-year free warranty.
For technical support or warranty claims, please refer to the contact information provided in your Warranty Card or contact the seller directly.
Contact Information:
- Email: 2039728528@qq.com
- WhatsApp: +86 17700267836
- WeChat: +86 17700267836