SCULPFUN iCube Ultra 12W

Contents

SCULPFUN iCube Ultra 12W Desktop Laser Engraver User Manual

Model: iCube Ultra 12W | Brand: SCULPFUN

1. Introduction

The SCULPFUN iCube Ultra 12W is an advanced desktop laser engraving machine designed for both beginners and experienced users. It features a fully enclosed design, ensuring Class 1 laser safety compliance, and integrates a high-efficiency smoke filter system for a clean and safe working environment. With its 12W diode laser and optional 1.2W infrared laser module, it offers versatile engraving and cutting capabilities across a wide range of materials.

SCULPFUN iCube Ultra 12W Desktop Laser Engraver

Figure 1: SCULPFUN iCube Ultra 12W Desktop Laser Engraver

2. Safety Information

Your safety is paramount. The iCube Ultra is designed with multiple safety features to ensure a secure operating experience. Please read and understand all safety instructions before use.

2.1. Class 1 Laser Safety Compliance

The iCube Ultra complies with FDA/Class 1 laser safety standards, making it an entry-level, high-performance laser engraving machine suitable for various environments.

2.2. Enclosed Design & Protective Cover

The machine features a fully enclosed design with a detachable acrylic protective cover. This design eliminates the need for safety goggles during operation. A small built-in door provides easy access to materials while maintaining safety.

2.3. Safety Mechanisms

  • Immediate Stop: The machine supports immediate stopping of operation if the protective door is opened during engraving.
  • Emergency Stop Switch: A prominent emergency stop switch is located on the machine for immediate shutdown in case of any unexpected event.
  • Temperature Sensor: Equipped with a temperature sensor that alarms and stops operation if the internal temperature becomes too high.
  • USB Security Key: Provides additional security guarantees.

2.4. Smoke Filter System

A built-in high-efficiency smoke filter system prevents pungent smoke odors, making the machine safe for use in homes, offices, or classrooms. This system includes a strong suction fan, a smoke dust filter, and an activated carbon smell filter.

Safety Features and Components

Figure 2: Key Safety Features and Components

Built-in Smoke Filter System Diagram

Figure 3: Built-in Smoke Filter System with Multi-layer Filtration

3. Product Overview and Components

3.1. Package Contents

The SCULPFUN iCube Ultra package includes the following items:

  • 1x iCube Ultra machine body
  • 1x 12W blue laser module
  • 1x Data cable
  • 1x Power adapter
  • 1x Tool set
  • 1x Lens repair kit
  • 1x Protective goggles
  • 1x Wood board
  • 1x MDF board
  • 1x Smoke exhaust pipe
  • 1x Flange
  • 1x Hose clamp
Package Contents

Figure 4: Contents included in the iCube Ultra package

3.2. Machine Parts and Interfaces

Familiarize yourself with the various parts and interfaces of your iCube Ultra machine:

  1. RGB Indicator Light: Displays machine status.
  2. Temperature Alarm Sensor: Monitors internal temperature.
  3. RA mini Rotary Attachment Port: For connecting rotary accessories (sold separately).
  4. Multi-Function Button: For various operations.
  5. Auto Focus Button: Initiates one-click auto-focus.
  6. Power Port: Connects to the power adapter.
  7. Camera Port: For connecting a positioning camera (accessories sold separately).
  8. Type-C PC Port: For connecting to a computer.
  9. Power Switch: Turns the machine on/off.
  10. Air Assist Hose Hole: For connecting an air assist system (accessories sold separately).
  11. USB Dongle Port: For security key.
  12. Automatic Air Pump Port: For connecting an automatic air pump (accessories sold separately).
  13. Emergency Stop Switch: For immediate shutdown.
Labeled parts and interfaces of the iCube Ultra

Figure 5: Front and Rear View of iCube Ultra with Labeled Components

4. Setup

The SCULPFUN iCube Ultra is designed for quick and easy setup, requiring no complicated installation. Simply unpack the machine, connect the necessary cables, and you're ready to begin.

4.1. Initial Placement

Place the iCube Ultra on a stable, level surface in a well-ventilated area. Ensure there is sufficient space around the machine for operation and maintenance.

4.2. Power Connection

Connect the power adapter to the machine's power port (6) and then plug it into a suitable power outlet.

4.3. Computer/App Connection

Connect the machine to your computer using the provided data cable via the Type-C PC Port (8), or establish a wireless connection to the Sculpfun APP on your iOS/Android device.

4.4. Laser Module Installation (if not pre-installed)

If your laser module is not pre-installed, carefully insert it into the designated slot until it clicks into place. Ensure it is securely fastened.

4.5. Smoke Exhaust Setup

Attach the smoke exhaust pipe to the machine's exhaust port using the flange and hose clamp. Direct the other end of the pipe to an outdoor vent or a dedicated air filtration system to ensure proper smoke removal.

Video 1: SCULPFUN iCube Ultra Product Demonstration and Setup Overview

5. Operating Instructions

The iCube Ultra is designed for intuitive operation, allowing you to create with ease.

5.1. Power On

Flip the Power Switch (9) to turn on the machine. The RGB Indicator Light (1) will illuminate, indicating the machine's status.

5.2. Software and Connectivity

The iCube Ultra is compatible with easy-to-use laser engraving software. You can control the machine via a wired connection to your PC (Windows/MacOS) or wirelessly through the Sculpfun APP (iOS/Android).

High Compatibility with various operating systems and Sculpfun APP

Figure 6: Software Compatibility and Mobile App Support

5.3. Material Placement

Place your material on the engraving platform. Ensure it is flat and within the 150x150mm working area. The maximum processing height is 80mm.

5.4. Auto Focus

Press the Auto Focus Button (5) for one-click auto-focus. This eliminates the need for manual adjustments, ensuring optimal laser focus for precise results.

5.5. Engraving/Cutting Process

Once your design is loaded and the material is in place, initiate the engraving or cutting process through the software/app. The machine boasts a maximum engraving speed of 10000mm/min.

5.6. Indicator Light Status

The RGB Indicator Light (1) provides real-time feedback on the machine's status:

  • Green: Standby Mode
  • Blue: In Operation
  • Yellow: Engraving Completed
  • Red: Malfunction
Indicator Light Status Meanings

Figure 7: Indicator Light Modes and Their Meanings

5.7. Semi-Open Structure for Large Objects

The unique semi-open structure design allows you to engrave not only inside the machine but also directly on the surface of larger objects that may not fit entirely within the enclosure.

Semi-open structure design for engraving larger objects

Figure 8: Semi-Open Structure Design

5.8. Material Compatibility

The iCube Ultra supports precise engraving and cutting on over 300 materials, including but not limited to:

  • 12W Diode Laser: Leather, Wood, Acrylic, Brass, Bamboo, Stone, Silicone case, Paper, Plywood, MDF.
  • 1.2W Infrared Laser (Dual Version Only): Stainless Steel, Plastic, Aluminum Alloy, Ceramic.
Material compatibility for 1.2W Infrared Laser and 12W Diode Laser

Figure 9: Diverse Material Engraving Capabilities

5.9. Optional Accessories

Enhance your engraving capabilities with optional accessories (sold separately):

  • RA Mini Rotary Roller: For engraving cylindrical objects.
  • Air Pump: For air assist during cutting, improving results and reducing charring.
  • Air Purifier: For additional air filtration.
  • Positioning Camera: For precise material alignment and design placement.
Multiple accessories for expanded functionality including RA Mini Rotary Roller, Air Pump, Air Purifier, and Positioning Camera

Figure 10: Optional Accessories for Enhanced Functionality

6. Maintenance

Regular maintenance ensures the longevity and optimal performance of your iCube Ultra.

6.1. Laser Lens Replacement

The iCube Ultra series features an innovative laser head that supports replacement of the laser lens. If the lens becomes damaged or dirty after long-term use, it can be replaced to restore cutting efficiency. Refer to the detailed instructions in the full user manual for lens replacement procedures.

6.2. Cleaning the Smoke Filter

Periodically check and clean or replace the smoke dust filter and activated carbon smell filter within the built-in smoke filter system to maintain effective smoke and odor removal.

6.3. General Cleaning

Keep the engraving platform and the interior of the machine clean from debris and dust. Use a soft, dry cloth for cleaning. Avoid using abrasive cleaners or solvents.

7. Troubleshooting

This section provides solutions to common issues you might encounter.

7.1. Machine Not Powering On

  • Ensure the power adapter is securely connected to the machine and a working power outlet.
  • Check the Power Switch (9) is in the 'On' position.

7.2. Laser Not Firing or Weak Output

  • Verify the laser module is correctly installed and seated.
  • Check if the laser lens is clean and undamaged. Replace if necessary.
  • Ensure the Auto Focus function has been performed correctly.
  • Confirm the USB security key is inserted.

7.3. Engraving Quality Issues

  • Blurry Engraving: Re-run the Auto Focus function. Ensure the material is flat and stable.
  • Inconsistent Engraving: Check for loose components or debris on the linear bearings.
  • Incomplete Cuts: Adjust laser power and speed settings in your software. Ensure the material is suitable for the laser power.

7.4. Smoke/Odor Issues

  • Ensure the smoke exhaust pipe is properly connected and vented.
  • Check if the smoke filter needs cleaning or replacement.

7.5. Indicator Light Showing Red (Malfunction)

  • Check for any obstructions inside the machine.
  • Verify the protective door is fully closed.
  • If a temperature alarm is triggered, allow the machine to cool down.
  • If the issue persists, power cycle the machine and consult the full user manual or contact support.

8. Specifications

FeatureSpecification
Product NameSCULPFUN iCube Ultra Desktop Laser Engraver
ModeliCube Ultra 12W
Brand NameSCULPFUN
Product Size330 x 360 x 290 mm
Laser Power12W blue light (Diode Laser)
Optional Laser Module1.2W Infrared Laser (Dual Version Only)
Working Voltage12V
Working Current6A
Engraving Area150 x 150 mm
Maximum Processing Height80 mm
Maximum Engraving Speed10000 mm/min
Motion AccuracyUp to 0.1 mm
Safety CertificationFDA/Class 1, CE
ConnectivityType-C PC Port, Wireless (APP)
CompatibilityWindows, MacOS, Android, iOS
Package WeightApprox. 8.5 kg
Package Size430 x 410 x 355 mm
Outer Box Size840 x 450 x 385 mm

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official SCULPFUN website or contact your authorized dealer. Keep your purchase receipt as proof of purchase.

© 2023 SCULPFUN. All rights reserved.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.