1. Product Overview
The WEEME 806 Electric Hair Clipper is a versatile and powerful grooming tool designed for both wet and dry haircuts, as well as beard trimming. It features a rechargeable battery, USB charging capability, and a range of accessories for precise styling.
Package Contents
- Main Hair Clipper
- Detail Trimmer (in some kits)
- Foil Shaver (in some kits)
- Multiple Guide Combs (e.g., 1.5mm, 2mm, 3mm, 4mm, 4.5mm, 6mm)
- USB Charging Cable(s)
- Cleaning Brush(es)
- Lubricating Oil (may be included)
Figure 1: Example of WEEME 806 Hair Clipper Kit Contents, including main clipper, detail trimmer, foil shaver, various guide combs, USB cables, and cleaning brushes.
2. Setup and Charging
Initial Charge
Before first use, fully charge the hair clipper for a minimum of 12 hours. Subsequent charges will typically take approximately 3 hours. Some models may require up to 5 hours for a full charge.
Charging Instructions
- Ensure the clipper is turned off.
- Connect the USB charging cable to the charging port on the clipper.
- Connect the other end of the USB cable to a power source such as a power bank, computer, wall adapter, or socket.
- The LED display will indicate charging status.
Figure 2: The WEEME 806 Hair Clipper connected for USB charging, compatible with various USB power sources.
3. Operating Instructions
Basic Operation
- Ensure the clipper is fully charged. The LED display shows the battery percentage.
- Select the appropriate guide comb for your desired hair length. Attach it securely to the clipper head.
- For fine adjustments, use the integrated adjusting lever on the side of the clipper, which allows for lengths between 0.8mm and 2.0mm.
- Press the ON/OFF switch to start the clipper.
- Begin trimming hair or beard, moving the clipper against the direction of hair growth.
- The clipper is suitable for both wet and dry haircutting.
- After use, turn off the clipper and clean it as described in the Maintenance section.
LED Display Indicators
Figure 3: Close-up of the LED display showing battery indicator, oil reminder, and charging reminder icons.
- Battery Indicator: Shows the remaining battery percentage.
- Oil Reminder: Illuminates to remind you to lubricate the blades.
- Charging Reminder: Illuminates when the battery is low or when the device is charging.
Safety Features
The blades feature rounded tips to ensure safety during use and prevent skin irritation.
Figure 4: Illustration of the safe design with rounded blade tips, demonstrating gentle contact with skin.
4. Maintenance
Proper maintenance ensures the longevity and optimal performance of your hair clipper.
- Cleaning the Cutter Head: After each use, remove the cutter head. Use the provided small brush to sweep away any hair clippings along the direction of the blade. You can then clean the cutter head with water. Ensure it is completely dry before reattaching or storing to prevent rust.
- Lubrication: Once the cutter head is completely dry, apply a few drops of lubricating oil onto the blades. This helps maintain blade sharpness and smooth operation.
- Cleaning the Motor Head: Use the small brush to clean any broken hair from the motor head of the main unit. Do not flush the motor head with water to prevent water from entering the internal components.
- External Cleaning: Do not use acidic substances to clean the clipper's body. It is best to wipe the fuselage with a neutral lotion or a damp cloth.
- Blade Replacement: The cutter head needs to be replaced regularly to maintain cutting performance. Refer to the manufacturer's guidelines for replacement parts.
- Battery Care: To maintain battery life, ensure the clipper is fully charged before long-term storage. For normal use, periodically allow the battery to fully discharge and then recharge it. If not used for an extended period, charge it every few months.
5. Troubleshooting
If you encounter issues with your WEEME 806 hair clipper, consider the following:
- Clipper not turning on: Ensure the battery is fully charged. Check the charging reminder on the LED display.
- Poor cutting performance: Clean the blades thoroughly, lubricate them, and ensure no hair is obstructing the cutting mechanism. If performance does not improve, the blades may need replacement.
- Battery not holding charge: Ensure you are following the recommended charging procedures, especially the initial 12-hour charge. For long-term storage, ensure periodic charging.
- Unusual noise or vibration: Turn off the clipper immediately. Check for any foreign objects or damage to the blades or motor. If the issue persists, discontinue use.
6. Specifications
| Feature | Specification |
|---|---|
| Brand Name | WEEME (Manufacturer: XMSJ) |
| Model | 806 |
| Power Type | Rechargeable, USB Power |
| Battery Type | Li-ion Battery (Included) |
| Charging Time | Approx. 3 hours (12 hours for first use) |
| Usage Time | Approx. 85 minutes (up to 180-240 minutes depending on model and usage) |
| Voltage | Global Universal (100-240V) |
| Blade Material | Other (Self-sharpening) |
| Motor Type | Vibrating |
| Minimum Haircut Length | 1.1 - 2 mm (adjustable lever 0.8-2.0mm) |
| Length Adjustment Method | Change of nozzles (guide combs) |
| Functions | Wet haircut, Dry haircut |
| Target Audience | Adults |
| Certifications | RoHs, CE |
| Origin | Mainland China |
| Approx. Dimensions (Clipper) | Height: 17cm (6.69in), Top Width: 3.6cm (1.41in), Bottom Width: 2.2cm (0.86in) |
| Approx. Package Dimensions | Length: 20cm, Width: 20cm, Height: 5cm |
| Approx. Package Weight | 0.28 kg |
Figure 5: Dimensions of the WEEME 806 main hair clipper.
7. User Tips
- For best results, ensure hair is clean and detangled before trimming.
- Always start with a longer guide comb than you think you need, and gradually reduce the length if desired.
- Move the clipper at a steady, even pace for consistent results.
- Regularly check the LED display for the oil reminder and lubricate blades promptly to prevent wear and tear.
- When using for beard trimming, comb your beard in the direction of growth before trimming to ensure all hairs are captured.
8. Warranty and Support
For specific warranty information, please refer to the documentation provided at the time of purchase or contact your seller directly. Keep your proof of purchase for any warranty claims.
For product support, troubleshooting beyond this manual, or to inquire about replacement parts, please contact the retailer or manufacturer's customer service.
