Introduction
This manual provides instructions for the proper use and maintenance of your HIROYASU USB-C Programming Cable. This cable is designed to facilitate programming of compatible two-way radios, including the HIROYASU HW-UV938, HW-UV910, and Irradio UV-98Plus models, via a computer running supported operating systems.
Product Overview
The HIROYASU USB-C Programming Cable connects your compatible walkie-talkie to a computer for channel programming and other radio settings adjustments. It features a USB-A connector for your computer and a Type-C connector for your radio.

Figure 1: HIROYASU USB-C Programming Cable (overall view)

Figure 2: Close-up view of the USB-A and Type-C connectors
Setup Instructions
- Install Drivers: Before connecting the cable, ensure that the necessary USB drivers are installed on your computer. These drivers are typically provided by the radio manufacturer or the cable supplier. If you do not have the drivers, please contact the seller for assistance.
- Install Programming Software: Obtain and install the appropriate programming software for your specific walkie-talkie model (e.g., HIROYASU HW-UV938, HW-UV910, Irradio UV-98Plus). This software is essential for configuring your radio. Please contact the seller for information on where to obtain the software.
- Connect to Computer: Plug the USB-A end of the programming cable into an available USB port on your computer.
- Connect to Radio: With the radio powered off, connect the Type-C end of the programming cable to the programming port on your walkie-talkie. Ensure a secure connection.
- Power On Radio: Turn on your walkie-talkie.
- Verify Connection: Launch the programming software on your computer. The software should detect the connected radio. If not, check driver installation and cable connections.
Operating Instructions
- Launch Software: Open the programming software on your computer.
- Read Data from Radio: In the software, select the option to "Read from Radio" or "Download from Radio." This will transfer the current settings from your walkie-talkie to the computer.
- Modify Settings: Use the software interface to adjust channels, frequencies, tones, power levels, and other programmable features as needed.
- Write Data to Radio: Once modifications are complete, select the option to "Write to Radio" or "Upload to Radio" to transfer the new settings from the computer back to your walkie-talkie.
- Verify Settings: After writing, power cycle your radio and test the new settings to ensure they are correctly applied and functioning as expected.
- Disconnect: Safely close the programming software, power off your radio, and then disconnect the programming cable.
Maintenance
- Storage: Store the cable in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tightly coiling or bending the cable sharply to prevent internal damage.
- Cleaning: Use a soft, dry cloth to clean the cable and connectors. Do not use liquid cleaners or solvents.
- Handling: Always grasp the connectors when plugging or unplugging the cable, rather than pulling on the cable itself. The cable is made of High Strength Durable PU material, but proper handling extends its lifespan.
Troubleshooting
- Cable Not Recognized:
- Ensure drivers are correctly installed.
- Try a different USB port on your computer.
- Restart your computer.
- Verify the cable is securely connected to both the computer and the radio.
- Programming Software Does Not Detect Radio:
- Confirm the radio is powered on.
- Check that the correct COM port is selected in the software settings (if applicable).
- Ensure you are using the correct programming software for your radio model.
- Reinstall drivers and software.
- Error During Read/Write Operation:
- Ensure the radio battery is sufficiently charged.
- Do not interrupt the connection during programming.
- Close other applications that might interfere with the USB port.
Specifications
| Feature | Detail |
|---|---|
| Item Type | Programming Cable |
| Cable Length | 100 cm (Below 1.5m) |
| USB Interface | USB 2.0 |
| Radio Connector | Type-C |
| Cable Material | High Strength Durable PU |
| Color | Black |
| Weight | 5g |
| Adapted System | WinXP, Win7, Win8, Win10, Win11 |
| Adapted Walkie Talkie Models | Iradio UV-98Plus, HIROYASU HW-UV910, HIROYASU HW-UV938 |
| Certification | CE, FCC |
| Origin | Mainland China |
User Tips
- Always ensure you have the latest version of the programming software and drivers for optimal performance and compatibility.
- Before making significant changes, it is recommended to save a backup of your radio's current configuration.
Warranty and Support
For technical support, driver downloads, programming software, or any inquiries regarding your HIROYASU USB-C Programming Cable, please contact the seller directly. They can provide the necessary software and assistance for your specific radio model.
Note: The seller explicitly states: "P.S: please contact us by message for sending the software."