Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your PHYEE 7-inch Android Car Radio. This unit is designed to enhance your driving experience with features such as CarPlay, Android Auto, Bluetooth, RDS radio, WiFi connectivity, and GPS navigation. It is specifically compatible with Ford F150 models from 2007 to 2014.

Figure 1: PHYEE 7-inch Android Car Radio
Package Contents
Please check the contents of your package against the list below:
- 1 x Android Head Unit
- 1 x Harness Adapter
- 1 x CAN BUS Decoder
- 1 x Antenna Adapter
- 1 x 16 Pin Cable
- 1 x GPS Antenna
- 1 x WiFi Antenna
- 2 x USB Cables
- 1 x User Manual
- 1 x Reversing Camera (optional)

Figure 2: Product Accessories
Panel Overview
Familiarize yourself with the front and rear panels of the head unit:

Figure 3: Panel Introduction
Front Panel Controls:
- MIC: Microphone input.
- Power Button: Press to turn on/off, short press for standby.
- Home Button: Returns to the main home screen.
- Volume + / Volume -: Adjusts the audio volume.
- Return Button: Navigates back in menus.
- Reset Hole: For factory reset (use a thin object to press).
- USB Port: For USB reading and charging.
Rear Panel Connections:
- 6PIN USB: USB port for data transfer.
- 4PIN USB: USB port for data transfer.
- Audio and Video Transfer: RCA connections for audio/video input/output.
- Power Plug: Main power connection.
- Reversing Video Input: RCA input for rearview camera.
- Radio Antenna: Connection for FM/AM radio antenna.
- GPS Antenna: Connection for GPS signal reception.
Installation and Setup
Proper installation is crucial for optimal performance. It is recommended to have this unit installed by a professional. Ensure the vehicle's power is disconnected before starting installation.
CAN Bus Decoder Setup:
After completing the wiring, you must configure the CAN Bus settings on the Android radio. This ensures proper communication with your vehicle's systems, such as steering wheel controls.

Figure 4: CAN Bus Decoder Connection
- Enter the Android radio factory settings part (password: 3368).
- Choose CAN Bus decoder type as SimpleSoft or XINPU.
- Choose car brand as Ford.
- Choose F150 and the appropriate year range (2007-2014).
General Wiring:
Connect the provided wiring harnesses, GPS antenna, and WiFi antenna to their respective ports on the head unit and integrate them with your vehicle's existing wiring. Refer to the included wiring diagram for specific connections.
Operating Instructions
Basic UI Navigation:
The unit runs on Android 13. Navigate through applications and settings using the touchscreen interface. Swipe left/right to access different app pages. The home button returns you to the main screen.

Figure 5: UI Interface Display
Radio (FM/RDS):
Access the FM radio application from the main menu. You can manually tune frequencies or use the preset stations. The RDS function provides additional information like station name (PS), program type (PTY), alternative frequencies (AF), and traffic announcements (TA).

Figure 6: RDS Radio Interface
Bluetooth (BT 5.1):
Pair your smartphone via Bluetooth 5.1 for hands-free calling and audio streaming (A2DP). Navigate to the Bluetooth settings, enable Bluetooth on your phone, and select the car radio from the list of available devices. The unit supports phonebook synchronization.

Figure 7: Bluetooth Call/Music
GPS Navigation:
The unit features built-in GPS navigation with an omnidirectional map display. Access the navigation application to plan routes and receive turn-by-turn directions.

Figure 8: GPS Navigation
CarPlay & Android Auto:
Connect your iPhone or Android smartphone to use Apple CarPlay or Android Auto. These features allow you to access your phone's apps, navigation, music, and messaging directly on the car radio screen. Both wired and wireless connections are supported.

Figure 9: CarPlay & Android Auto Connectivity
Video 1: UI, FM Radio, USB Media, and CarPlay Demonstration
Multimedia Playback (USB):
Connect a USB flash drive to one of the USB ports to play audio, video, or view high-definition pictures. The unit supports various media formats including MP3, MP4, WMA, JPEG, MPEG, AVI, RM, FLV, ASF, WMV, MP4, MKV, OGM, TS, DivX, RMVB, and VOB.

Figure 10: Multimedia Playback via USB
WiFi Internet:
Connect to the internet via 2.4G WiFi. The unit supports mobile phone hotspot connections, allowing you to access online features and applications.

Figure 11: WiFi Internet Connectivity
Steering Wheel Control:
The unit supports steering wheel control. After proper CAN Bus configuration, you can set your steering wheel buttons as function keys for the car radio, allowing for convenient control without taking your hands off the wheel.

Figure 12: Steering Wheel Control Setup
Reversing Video (Optional):
If an optional reversing camera is connected, the unit will automatically switch to the reverse image mode when the vehicle is put into reverse gear, providing a clear view of the area behind your car.

Figure 13: Reversing Video Display
Driving Recorder (Optional):
The unit supports USB input for a driving recorder (DVR). When connected, it can provide real-time recording of your journeys, enhancing safety and providing evidence in case of incidents.

Figure 14: Driving Recorder Functionality
Maintenance
- Cleaning: Use a soft, dry cloth to clean the screen and unit. Avoid abrasive cleaners or solvents.
- Software Updates: Periodically check for software updates to ensure optimal performance and access to new features. Updates can usually be found on the manufacturer's website or through the unit's settings.
- Temperature: Avoid exposing the unit to extreme temperatures, direct sunlight for prolonged periods, or high humidity.
- Reset: If the unit becomes unresponsive, use a thin object to press the reset hole on the front panel. This will perform a soft reset without losing data.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not power on. | Incorrect wiring, blown fuse, vehicle power issue. | Check power connections and fuses. Ensure vehicle power is supplied. Consult a professional installer. |
| No sound. | Volume too low, incorrect audio output settings, speaker wiring issues. | Increase volume. Check audio settings and ensure speakers are correctly wired. |
| GPS not working or inaccurate. | GPS antenna not properly connected or positioned, poor satellite signal. | Ensure GPS antenna is securely connected and placed in an area with clear sky view. |
| Bluetooth connection issues. | Phone not in pairing mode, incorrect pairing process, interference. | Ensure Bluetooth is enabled on both devices and in pairing mode. Try re-pairing. Clear previous connections. |
| CarPlay/Android Auto not connecting. | Incorrect USB cable, phone not compatible, software glitch. | Use a high-quality USB cable. Ensure your phone's OS is up to date. Restart both phone and head unit. |
| Steering wheel controls not working. | CAN Bus not configured correctly, wiring issue. | Re-check CAN Bus settings (password 3368). Verify wiring connections. |
Specifications
| Feature | Detail |
|---|---|
| Brand Name | PHYEE |
| Model | FFF150 |
| Operating System | Android 13 |
| RAM | 2 G |
| ROM | 32 G |
| Processor Type | 4 Cores |
| Display Size | 7" |
| Resolution | 1024*600 |
| Din | Double Din |
| Out Power | 4*42W |
| Voltage | 12 V |
| Item Weight | 1.55kg |
| Material | plastic, metal, electronic |
| Tuner Type | FM RDS |
| Preset Station | 18 FM preset |
| Bluetooth | Bluetooth 5.1 |
| Apple CarPlay | Apple CarPlay (wireless / wired) |
| Android Auto | Android Auto (wireless / wired) |
| Mirror Link | Mirror Link |
| Special Features | WiFi function, Support steering wheel control, Support Can-Bus, Built-in GPS, Charger, MP3 players, Voice Control, CarPlay, Android Auto, Reversing Input, Remote Controller Included |
| Digital Media Format | Mp3, MP4, WMA, JPEG |
| OSD Language | Multi-language support (Chinese (Simplified/Traditional), Albanian, Arabic, Azeri, Irish, Estonian, Belarusian, Bulgarian, Icelandic, Polish, Persian, Danish, German, Russian, French, Filipino, Finnish, Georgian, Haitian Creole, Korean, Dutch, Galicia, Catalan, Czech, Croatian, Latin, Latvian, Lithuanian, Romanian, Maltese, Malay, Macedonian, Norwegian, Portuguese, Japanese, Swedish, Serbian, Slovak, Slovenian, Swahili, Thai, Turkish, Welsh, Ukrainian, Hebrew, Greek, Spanish, Hungarian, Armenian, Italian, Yiddish, Hindi, Urdu India, Indonesia, English, Vietnamese) |
| Certification | CE, FCC, RoHS |
| Button Backlight Color | Red |
| For Vehicle Brands/Model | Ford F150 (2007-2014) |
User Tips
- For the best GPS performance, ensure the GPS antenna is mounted in a location with a clear view of the sky, away from metal obstructions.
- When using CarPlay or Android Auto, ensure your phone's operating system is updated to the latest version for optimal compatibility and stability.
- If experiencing slow performance, try closing unused applications running in the background.
- To maintain clear audio quality, regularly clean the screen and avoid touching the microphone area unnecessarily.
- Consider using a high-quality USB cable for wired CarPlay/Android Auto connections to prevent connectivity issues.
Warranty and Support
Your PHYEE car radio comes with a 1-year warranty from the date of purchase, covering manufacturing defects. For technical support, troubleshooting assistance, or warranty claims, please contact the PHYEE Official Store or your authorized dealer. Please retain your proof of purchase for warranty validation.
For further assistance, refer to the contact information provided with your purchase or visit the official PHYEE website.