1. Introduction
The DaranEner NEOZ Portable Power Station is a compact and powerful energy solution designed for outdoor adventures, emergency backup, and general portable power needs. Featuring a 300W (600W surge) AC inverter and a 179.2Wh LiFePO4 battery, it offers multiple output ports and versatile charging options. This manual provides essential information for safe and efficient use of your NEOZ power station.
2. Safety Instructions
- Do not disassemble, repair, or modify the unit.
- Keep the unit away from fire, water, and extreme temperatures.
- Do not use or store the unit in direct sunlight or high temperatures.
- Avoid dropping or subjecting the unit to strong impacts.
- Ensure proper ventilation during use and charging to prevent overheating.
- Keep out of reach of children.
- Dispose of the product according to local regulations for LiFePO4 batteries.
3. Package Contents
Upon unpacking, please ensure all items are present:
- DaranEner NEOZ Portable Power Station
- AC Charging Cable
- Car Charging Cable (12V)
- User Manual
4. Product Overview
The DaranEner NEOZ is designed for ease of use and portability, weighing only 6.2 lbs (2.75kg) and measuring 8.6 x 7 x 5.1 inches (22x18x13cm). It features a robust LiFePO4 battery and multiple output ports to power various devices.

4.1. Input and Output Ports

- INPUT/MPPT (DC5521 Solar Input): For solar panel charging (Max. 90W, 10V-30V DC).
- 12V/3A (Car Socket Output): Max. 36W output for car appliances.
- QC3.0 18W (USB-A Outputs): Two ports for fast charging compatible USB devices.
- PD 60W (USB-C Output): One port for Power Delivery compatible devices.
- DC ON/OFF Button: Controls DC outputs.
- AC ON/OFF Button: Controls AC outputs.
- AC OUTPUT (AC Outlets): Two 120V-60Hz outlets, 300W continuous, 600W surge.
- AC INPUT: For AC wall charging (Max. 100W, 100-120V-60Hz).
4.2. LED Flashlight
The NEOZ includes a built-in 2W LED flashlight with multiple modes for emergency or outdoor use.

- Constant Light: Two brightness levels (50% and 100%).
- Flashing Mode: For signaling or attention.
- SOS Mode: International distress signal.
5. Initial Setup and Charging
Before first use, it is recommended to fully charge your DaranEner NEOZ Power Station.
5.1. Charging Methods
The NEOZ offers three convenient charging methods:
- AC Wall Outlet Charging: Connect the provided AC charging cable to the AC INPUT port and then to a wall outlet. The power station supports 120W AC Super Fast Charge, reaching 100% in approximately 1.5 hours.


- Solar Panel Charging: Connect a compatible solar panel (Max. 90W, 10V-30V DC) to the INPUT/MPPT port. The built-in MPPT controller optimizes solar charging. A full charge can be achieved in approximately 2 hours under optimal sunlight conditions.

- Car Charging: Use the provided car charging cable to connect the power station to your vehicle's 12V lighter socket. A full charge takes approximately 2 hours.

6. Operating Instructions
6.1. Powering On/Off
To power on the unit, press and hold the main power button (if available, otherwise refer to specific output buttons). To power off, press and hold the main power button again. Individual output sections (AC, DC) have their own ON/OFF buttons.
6.2. Using Output Ports
- AC Outputs: Press the 'AC ON/OFF' button to activate the AC outlets. Plug in your devices (e.g., laptops, small appliances) ensuring their total power consumption does not exceed 300W (or 600W surge).
- DC Outputs (USB-A, USB-C, Car Socket): Press the 'DC ON/OFF' button to activate the DC ports. Connect your USB-powered devices or 12V car appliances.
- LED Flashlight: Press the dedicated LED light button to cycle through brightness levels and modes (constant, flashing, SOS).
7. LED Screen Display Guide
The dynamic LED display provides real-time information about the power station's status.

| Indicator | Description |
|---|---|
| Power Indicator (%) | Remaining battery percentage. |
| Input Indicator (IN) | Indicates power input (charging). |
| Time Indicator (Min/Hrs) | Estimated time remaining for charging or discharging. |
| Frequency (Hz) | AC output frequency. |
| Output AC Voltage (V) | Current AC output voltage. |
| Output Indicator (OUT) | Indicates power output (discharging). |
| AC Indicator | Indicates AC output is active. |
| DC Indicator | Indicates DC output is active. |
| USB Indicator | Indicates USB output is active. |
| PD Indicator | Indicates USB Power Delivery (PD) output is active. |
| LED Indicator | Indicates the LED flashlight is active. |
| Alarm Indicator (!) | Indicates an error or warning condition. |
8. Maintenance
To ensure the longevity and optimal performance of your DaranEner NEOZ Power Station:
- Storage: If storing for extended periods, recharge the battery to 80% every 3-6 months. This helps maintain the battery's health and extends its shelf-life.
- Cleaning: Use a dry, soft cloth to clean the exterior of the unit. Do not use harsh chemicals or abrasive materials.
- Temperature: Store the unit in a cool, dry place within the recommended operating temperature range (-10°C to 45°C).
9. Troubleshooting
The DaranEner NEOZ features an upgraded Battery Management System (BMS) for protection. If you encounter issues, check the following:
- No Output/Unit Shuts Down: The BMS may have activated protection due to overload, short-circuit, over-discharge, or overcharge. Disconnect all devices, restart the unit, and ensure connected devices do not exceed the rated power (300W AC, 36W Car Socket, 60W USB-C, 18W USB-A).
- Overheating: The unit has a built-in cooling fan. If it feels excessively hot, ensure the ventilation vents are not blocked. The BMS will automatically shut down the power supply if it detects overheating. Allow the unit to cool down before resuming use.
- Charging Issues: Ensure charging cables are securely connected and the power source is active. For solar charging, verify the solar panel is in direct sunlight and within the specified voltage range (10V-30V DC).
- Alarm Indicator (!): If the alarm indicator is lit, it signifies a system error. Try restarting the unit. If the issue persists, contact customer support.
10. Specifications
| Category | Details |
|---|---|
| General | Brand: DaranEner Type: Portable Power Station Model: NEOZ Color: Silver+Gray |
| Battery Details | Capacity: 179.2Wh Type: LiFePO4 Life Cycles: 3500+ Cycles to 80% Original Capacity Shelf-life: Recharge to 80% Every 3-6 Months System: MPPT Controller, BMS, UPS, etc. |
| Outputs | USB-C*1: Max. 60W USB-A*2: Max. 18W (QC3.0) Car Socket Output: Max. 36W (12V/3A) AC Output: 300W (600W surge) 120V-60Hz LED Lighting: 2W |
| Inputs | Solar Charging: Max. 90W (10V-30V DC) AC Input: Max. 100W (100-120V-60Hz) |
| General Operating | Operating Temperature: -10°C to 45°C |
| Weight & Size | Product Weight: 2.75kg (6.2 lbs) Package Weight: 4kg Product Size (L x W x H): 22x18x13cm (8.6 x 7 x 5.1 inches) Package Size (L x W x H): 36x34x25cm |



11. User Tips
- For optimal battery life, avoid completely draining the power station regularly.
- When using solar charging, position the solar panel directly towards the sun for maximum efficiency.
- Always check the power requirements of your devices before plugging them into the power station to avoid overloading.
- The pure sine wave AC output is safe for sensitive electronics.
- Utilize the LED flashlight's SOS mode in emergency situations to signal for help.
12. Warranty & Support
The DaranEner NEOZ Portable Power Station comes with a 5-year service warranty. For technical support, warranty claims, or any questions regarding your product, please contact DaranEner customer service through your purchase platform or the official DaranEner website.