1. Introduction
The Renke RS-FSXCS-N01-3H-EX Ultrasonic Weather Station is a civilian-level integrated meteorological station designed for comprehensive environmental monitoring. It simultaneously measures temperature, humidity, wind speed, wind direction, air pressure, rainfall, noise, and sunlight. This station is characterized by its high integration of all modules and fast response time. An electronic compass can also be fitted internally, enhancing its versatility for various applications.
2. Setup and Installation
The Renke Ultrasonic Weather Station is designed for easy installation, featuring a multi-collection device integrated design. It is suitable for pole mounting.
2.1 Mounting
- The device is designed for pole mounting.
- Its built-in electronic compass eliminates specific direction requirements during installation, allowing for horizontal mounting without complex alignment procedures.
2.2 Power and Communication
- The weather station operates on a 10-30V DC power supply.
- It utilizes a standard Modbus communication protocol for data transmission, ensuring compatibility with various data logging systems.
2.3 Physical Dimensions and Configurations
2.4 Application Environments
This weather station is suitable for a wide range of environmental monitoring applications:
- City environmental monitoring
- Agricultural automatic meteorological stations
- Traffic automatic meteorological stations along highways
- Meteorological field monitoring stations
- Automatic weather stations nearby high-voltage transmission substations or guyed structures
3. Operating Principles
The Renke Ultrasonic Weather Station integrates multiple sensors to provide comprehensive environmental data:
3.1 Measurement Principles
- Wind Speed and Direction: Measured using ultrasonic principles, providing 360° all-round data without mechanical moving parts or angle restrictions.
- Noise: Accurate collection with a measurement range of 30dB to 120dB.
- PM2.5 and PM10: Collected simultaneously with a range of 0-1000μg/m3 and a resolution of 1μg/m3. Features unique dual-frequency data collection and automatic calibration technology, ensuring consistency within ±10%.
- Temperature and Humidity: Ambient temperature and humidity are measured using an imported Swiss unit for high accuracy.
- Air Pressure: The air pressure sensor has a wide range of 0-120kPa, making it applicable to various altitudes.
3.2 Data Collection and Software
Data from the weather station can be integrated into existing systems or managed with Renke's solutions:
- If you have your own data logger, you only need to connect the sensor and utilize the provided communication protocol.
- If you do not have a data logger, Renke can provide one, complete with English software. This software allows you to easily read, inquire, and download collected data.
4. Maintenance
Proper maintenance ensures the longevity and accuracy of your Renke Ultrasonic Weather Station.
4.1 General Care
- The weather station has an IP54 protection grade, indicating resistance to dust and splashing water.
- Regularly inspect the unit for any physical damage or obstructions to sensors.
- Keep the exterior clean from dirt, dust, and debris to ensure accurate readings.
4.2 Cleaning
- Use a soft, damp cloth to clean the exterior surfaces.
- Avoid abrasive cleaners, solvents, or harsh chemicals that could damage the housing or sensitive sensor components.
- Periodically check the sensor openings for any blockages, especially for the wind, rainfall, and PM sensors, and gently clear them if necessary.
5. Troubleshooting
This section provides guidance for common issues you might encounter with your weather station.
5.1 No Data Output
- Power Supply: Verify that the power supply (10-30V DC) is correctly connected and providing adequate voltage.
- Communication: Check all communication wiring for secure connections. Ensure the Modbus protocol settings on both the weather station and your receiving system are correctly configured.
- Data Logger: Confirm that your data logger or receiving system is properly configured and operational to communicate with the weather station.
5.2 Inaccurate Readings
- Mounting Location: Ensure the weather station is mounted in an unobstructed location, away from buildings, trees, or other structures that could interfere with wind flow, sunlight, or rainfall collection.
- Sensor Cleanliness: Clean all sensor surfaces to remove any dirt, dust, spiderwebs, or debris that might affect measurements.
- Orientation: Confirm the unit is installed horizontally, as per setup instructions, especially if it has a built-in electronic compass.
5.3 Physical Damage
- If the unit sustains physical damage, contact Renke customer support for repair or replacement options. Do not attempt unauthorized repairs.
6. Specifications
6.1 General Specifications
- Power Supply: 10-30V DC
- Max. Power Consumption: 0.7W
- Body Material: ABS + Aluminum alloy
- Communication Protocol: Standard Modbus communication protocol
- Protection Grade: IP54
- Dimensions (without optical rainfall): Height 233mm, Width 109mm
- Dimensions (with optical rainfall): Height 265mm, Width 109mm
6.2 Detection Elements and Performance
| Detection Element | Range | Accuracy | Long-term stability |
|---|---|---|---|
| Air Temperature | -40℃~+80℃ | ±0.5℃ (25℃) | ≤0.1℃/y |
| Air Humidity | 0%RH~99%RH | ±3%RH (60%RH, 25℃) | ≤1%/y |
| Air Pressure | 0-120Kpa | ±0.15Kpa@25℃ 101Kpa | -0.1kPa/y |
| Sunlight | 0~200,000 Lux | ±7% (25℃) | ≤5%/y |
| Noise | 30dB~120dB | ±0.5dB | ≤3dB/y |
| PM2.5/PM10 | 0-1000ug/m3 | ±3%FS (@100μg/m3, 25℃, 50%RH) | ≤1%/y |
| Wind Speed | 0~40m/s | ±0.5+2%FS (60%RH, 25℃) | -- |
| Wind Direction | 0~359° | ±3° (60%RH, 25℃) | -- |
7. Warranty and Support
7.1 Product Warranty
The Renke Ultrasonic Weather Station typically comes with a 1-year warranty from the date of purchase. For detailed warranty terms and conditions, including coverage and claim procedures, please contact Renke customer service directly.
7.2 Customer Support
Shandong Renke Control Technology Co., Ltd. is committed to providing comprehensive meteorological solutions and excellent customer support. For any inquiries, technical assistance, troubleshooting guidance, or to obtain the latest product catalog and competitive quotation, please do not hesitate to contact the Renke team.
8. User Tips
- Robust Design: The weather station features a robust structure, making it easy to install and suitable for 24/7 continuous monitoring in various environments.
- Simplified Installation: Thanks to its built-in electronic compass, the device can be installed horizontally without specific directional alignment, simplifying the setup process.
- Optimal Placement: For the most accurate performance, ensure the unit is placed in an open area free from obstructions (such as tall buildings, trees, or other structures) that could affect wind flow, light exposure, or rainfall measurements.
- Data Logging: If using your own data logger, ensure you have the correct communication protocol implemented. If not, consider Renke's data logger solution for seamless data acquisition.