1. Introduction
The Hayve ES05 is a versatile 4.3-inch handheld industrial endoscope designed for detailed visual inspection in hard-to-reach areas. Featuring a high-definition camera, adjustable LED lighting, and a semi-rigid waterproof cable, it is ideal for automotive diagnostics, pipe assessment, wall cavity inspection, and various industrial maintenance tasks. This manual provides essential information for the safe and effective use of your ES05 endoscope.
2. Package Contents
Please check the box for the following items:
- ES05 Handheld Industrial Endoscope Unit
- Semi-Rigid Snake Cable (5 meters)
- USB Charging Cable
- User Manual
- Accessory Kit (Hook, Magnet, Side Mirror)
3. Product Overview
Familiarize yourself with the components and controls of your ES05 endoscope:
- Power Button: Turns the device on/off.
- Cable Interface Port: Connects the semi-rigid camera cable to the main unit.
- Charging/Data Slot: USB Type-C port for charging and data transfer.
- Charging Indicator Light: Indicates charging status.
- Reset Button: Resets the device (use a pin to press).
- Menu Navigation: Buttons for navigating on-screen menus.
- OK Button: Confirms selections or captures images/videos.
- Color/Black-White Button: Toggles between color and black & white display modes.
- Contrast Adjustment: Adjusts image contrast.
- Adjust Light Brightness: Controls the intensity of the LED lights on the camera probe.
- Zoom In (1.0X-2.0X): Magnifies the image.
- Zoom Out (2.0X-1.0X): Reduces image magnification.
- Image Flip (180°): Rotates the image on the screen.
- Pressure-Distributing Surface Geometry: Ergonomic design for comfortable grip.
- 15° Optimized Grip Angle: Enhances user comfort during prolonged use.
4. Initial Setup
4.1 Charging the Device
- Locate the USB Type-C charging port on the side of the main unit.
- Connect the provided USB charging cable to the port and plug the other end into a suitable USB power adapter (not included).
- The charging indicator light will illuminate during charging. A full charge takes approximately 3 hours and provides up to 3.5 hours of continuous runtime.
4.2 Attaching the Camera Probe
- Align the connector of the semi-rigid camera cable with the Cable Interface Port on the top of the main unit.
- Gently push and twist the connector clockwise until it is securely fastened.
- Ensure a firm connection to prevent image loss or flickering.
5. Operating Instructions
5.1 Powering On/Off
Press and hold the Power Button for a few seconds to turn the endoscope on or off. The 4.3-inch HD screen will display the live feed from the camera probe.
5.2 Adjusting LED Brightness
The camera probe features 8 adjustable LED lights for optimal illumination in dark environments. Use the 'Adjust Light Brightness' buttons on the control panel to cycle through 3 levels of brightness or turn the lights off.
5.3 Using Zoom and Image Flip
- Zoom: Use the 'Zoom In' and 'Zoom Out' buttons to magnify the image from 1.0X to 2.0X for closer inspection of details.
- Image Flip: Press the 'Image Flip' button to rotate the image 180 degrees, which can be useful when navigating the probe in complex orientations.
5.4 Attaching Accessories
The accessory kit includes a hook, magnet, and side mirror. These can be attached to the camera probe for specific tasks:
- Hook: For retrieving small objects.
- Magnet: For picking up metallic items.
- Side Mirror: For viewing at a 90-degree angle.
5.5 Application Examples
The ES05 endoscope is suitable for a wide range of applications:
- Automotive Diagnostics: Inspect engine components, wiring, and other vehicle parts.
- Pipe Assessment: Examine plumbing, drains, and HVAC ducts for blockages or damage.
- Wall Cavity Inspection: Look inside walls for electrical issues, pests, or insulation problems.
- Cabinet Gap Scanning: Explore tight spaces in furniture or appliances.
5.6 Product Demonstration Video
Watch this video for a visual guide on the features and operation of the Hayve ES05 Industrial Endoscope:
6. Maintenance
- Cleaning the Lens: Gently wipe the camera lens with a soft, dry cloth. For stubborn dirt, use a lens cleaning solution and a microfiber cloth.
- Cleaning the Probe: The camera probe is IP67 waterproof. After use in wet or dirty environments, wipe it clean with a damp cloth and mild soap, then dry thoroughly. Do not immerse the main unit in water.
- Storage: Store the endoscope and its accessories in a cool, dry place, away from direct sunlight and extreme temperatures.
- Battery Care: For optimal battery life, charge the device regularly and avoid fully discharging it for extended periods.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No image on screen | Camera cable not connected properly; Device not powered on; Low battery. | Ensure camera cable is securely connected. Press and hold power button. Charge the device. |
| Image is blurry | Lens is dirty; Insufficient lighting; Object too close/far. | Clean the camera lens. Adjust LED brightness. Adjust distance to object. |
| LED lights not working | LEDs turned off or at lowest setting. | Press the 'Adjust Light Brightness' button to increase intensity. |
| Device does not turn on | Low battery; Device malfunction. | Charge the device fully. If problem persists, contact customer support. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | ES05 |
| Display Screen | 4.3-inch IPS HD |
| Image Capturing Resolution | 1080*720 (Real-time display) |
| Viewing Angle | 60° (178° Wide-Angle HD Screen) |
| Cable Length | 5 meters (16.4 feet) |
| Cable Type | Semi-Rigid Snake Cable |
| Probe Diameter | 8mm |
| Illuminant | 8 Adjustable LED Lights |
| Waterproof Rating | IP67 (for camera probe) |
| Battery | 2500mAh Rechargeable (Battery Included: Yes) |
| Continuous Runtime | Approx. 3.5 hours |
| Fast Charging Time | Approx. 3 hours |
| Operating Temperature | -10°C to +55°C |
| Working Humidity | 30%-85%Rh |
| Interface | Type-C |
| Working Current | 460mA |
| Power Dissipation | 1.9W |
| Is Smart Device | No |
| Certification | CE, FCC, RoHS, WEEE |
9. User Tips
- The ES05 operates independently without the need for a phone, Wi-Fi, or additional apps, making it quick and easy to deploy.
- The upgraded short lens (3.3cm / 1.3in) is particularly suitable for navigating very narrow spaces and handling corner shooting with greater ease compared to traditional lenses.
- Utilize the semi-rigid cable to maintain the camera's position and direction, which is crucial for precise inspections in complex environments.
- Always ensure the camera lens is clean for the clearest possible image, especially when working in dusty or oily conditions.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the contact details provided by your retailer or the official Hayve website. Keep your purchase receipt as proof of purchase.
