Introduction
Thank you for choosing the HOMCOM Linen Criss Cross Legged Office Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your new office chair. Please read it thoroughly before use and retain it for future reference.

Safety Information
- Ensure all parts are present and undamaged before assembly. Do not use if any parts are missing or broken.
- Assemble the chair on a soft, clean surface to prevent scratches.
- Do not overtighten screws during assembly.
- Keep children and pets away during assembly.
- Do not stand on the chair.
- Do not use the chair for purposes other than its intended use as an office chair.
- Maximum weight capacity: 120 kg. Do not exceed this limit.
- Regularly check all fasteners to ensure they remain tight.
Setup and Assembly
Assembly of your HOMCOM office chair is required. Please follow the steps below carefully. It is recommended to have a second person assist with assembly for ease and safety.
- Unpack all components and verify against the parts list (not provided in this manual, refer to packaging).
- Attach the base to the gas lift cylinder.
- Secure the seat plate mechanism to the underside of the seat cushion.
- Connect the backrest to the seat cushion.
- Place the assembled seat onto the gas lift cylinder.
- Ensure all screws are tightened securely, but do not overtighten.

Operating Instructions
Your HOMCOM office chair is designed for comfort and versatility in your workspace.
- Adjustable Seat Height: To adjust the seat height, locate the lever under the seat. Pull the lever upwards while seated to lower the chair, or pull it upwards while standing to raise the chair. Release the lever at your desired height. The seat height can be adjusted between 45 cm and 55 cm.
- Tilt Function: The chair features a tilt function for gentle rocking. Push the lever inwards to lock the tilt mechanism, and pull it outwards to unlock it, allowing the chair to recline. The tension of the tilt can be adjusted by rotating the knob located under the seat.
- 360° Swivel: The chair is equipped with a 360° swivel mechanism, allowing for effortless rotation and movement around your workspace without needing to reposition the entire chair.
- Criss-Cross Sitting Design: The wide seat (61 cm) is specifically designed to accommodate comfortable cross-legged sitting, promoting a relaxed posture during long work hours. The backrest is shaped to fit the back for support.
- Armless Design: The armless design allows the chair to be easily tucked under most desks, saving space when not in use.



Maintenance
Proper maintenance will extend the life and appearance of your chair.
- Cleaning: For the linen-feel fabric, gently spot clean with a damp cloth and mild detergent. Avoid harsh chemicals or abrasive cleaners. Blot spills immediately.
- Frame: Wipe metal parts with a soft, dry cloth.
- Inspection: Periodically check all screws and bolts to ensure they are tight. Retighten if necessary.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading of the fabric.
Troubleshooting
If you encounter any issues with your chair, please refer to the following common problems and solutions:
- Chair does not adjust height:
- Ensure the height adjustment lever is fully engaged.
- Check if the gas lift cylinder is properly installed and not damaged.
- Chair squeaks or wobbles:
- Check all assembly screws and bolts and tighten them securely.
- Ensure the base and gas lift are correctly seated.
- Tilt function not working:
- Verify the tilt lock lever is in the unlocked position.
- Adjust the tilt tension knob to ensure it's not too tight.
If problems persist, please contact customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | HOMCOM |
| Model Number | 83B-427V70CW |
| Color | Cream |
| Material | Linen (100% Polyester), High-Density Foam, Metal |
| Installation Method | Self-contained (Assembly Required) |
| Overall Dimensions (W x D x H) | 61 cm x 64 cm x 76-86 cm |
| Seat Dimensions (W x D x H) | 61 cm x 49 cm x 45-55 cm (Adjustable) |
| Backrest Dimensions (W x L) | 61 cm x 40 cm |
| Weight Capacity | 120 kg |


User Tips
- For optimal comfort, adjust the seat height so your feet are flat on the floor or a footrest, and your knees are at a 90-degree angle.
- Experiment with the tilt tension to find the rocking resistance that best suits your preference.
- Take short breaks and stretch regularly, even with a comfortable chair, to maintain good posture and circulation.
- Utilize the armless design to easily move between different workstations or to save space when the chair is not in use.
Warranty and Support
For any questions regarding your HOMCOM office chair, including warranty information, missing parts, or operational assistance, please contact the retailer or manufacturer's customer support. Please have your model number (83B-427V70CW) and purchase details ready when contacting support.