HOMCOM 921-759V70BK

Contents

HOMCOM Massage Office Chair

Heated Reclining Desk Chair - Instruction Manual

Model: 921-759V70BK

1. Introduction

Thank you for choosing the HOMCOM Massage Office Chair. This versatile swivel chair is designed to provide both functionality and relaxation, featuring multiple massage points, a heating function, and a retractable footrest for enhanced comfort. This manual provides essential information for the safe assembly, operation, and maintenance of your new office chair. Please read it thoroughly before use and retain it for future reference.

HOMCOM Massage Office Chair in an office setting
Figure 1: HOMCOM Massage Office Chair in a typical office environment.

2. Important Safety Information

  • Always ensure all bolts and screws are securely tightened before using the chair.
  • Do not stand on the chair or use it as a step stool.
  • Do not use the chair if any parts are missing, damaged, or worn. Contact customer support for replacement parts.
  • Keep children and pets away from the chair during assembly.
  • Do not expose the chair to direct sunlight or extreme temperatures.
  • The chair is designed for indoor use only.
  • Maximum weight capacity: 400 lbs (181 kg). Do not exceed this limit.
  • When using the massage and heating functions, ensure the power cord is not pinched or damaged.
  • Unplug the chair from the power outlet when not in use or before cleaning.
Image showing a person sitting in the chair with a '400 lbs' label, indicating its heavy-duty capacity.
Figure 2: The chair is designed for big and tall users, supporting up to 400 lbs.

3. Package Contents

Please check the package carefully to ensure all components are present and undamaged. If any parts are missing or defective, please contact customer service.

  • Backrest
  • Seat Cushion with Armrests and Footrest
  • Gas Lift Cylinder
  • Gas Lift Cover
  • Star Base
  • Casters (5 pieces)
  • Mounting Hardware (screws, washers, Allen wrench)
  • Wired Remote Control (for massage/heat)
  • Power Adapter
  • Lumbar Support Pillow (integrated or separate)

4. Assembly Instructions

Assembly is required for this chair. It is recommended to assemble the chair on a soft, clean surface to prevent damage. Two people may be helpful for certain steps.

  1. Attach Casters to Base: Insert the five casters into the holes at the end of each leg of the star base. Push firmly until they click into place.
  2. Insert Gas Lift: Place the gas lift cylinder into the center hole of the star base. Cover the gas lift with the telescopic cover.
  3. Attach Seat to Base: Carefully align the mechanism under the seat cushion with the top of the gas lift cylinder. Press the seat down firmly onto the gas lift.
  4. Attach Backrest: Secure the backrest to the seat mechanism using the provided screws and Allen wrench. Ensure all screws are tightened evenly and securely.
  5. Connect Massage/Heat Wiring: Connect the wiring from the backrest and seat to the main control unit, if not pre-connected. Ensure the wired remote is accessible.
  6. Final Check: Verify that all connections are secure and the chair is stable before use.

5. Operating Instructions

5.1. Seat Height Adjustment

To adjust the seat height, pull the lever located under the right side of the seat upwards. While holding the lever, stand up to raise the seat or remain seated to lower it. Release the lever at the desired height to lock it in place. This chair features a Class-3 gas lift for smooth and secure operation.

5.2. Reclining Function and Footrest

The chair can recline up to 140 degrees. To recline, pull the lever on the left side of the seat upwards and lean back. Release the lever at your desired angle to lock it. To extend the retractable footrest, pull it out from under the seat. Push it back in when not needed.

Side view of the chair demonstrating the 140-degree reclining function and extended retractable footrest.
Figure 3: Chair demonstrating 140° recline and extended footrest for relaxation.

5.3. Massage and Heating Functions

The chair features a six-point vibration massage system with eight modes and a three-stage lumbar heating function, controlled by a wired remote. Plug the power adapter into a standard wall outlet and connect it to the chair's power input.

  • Power On/Off: Press the power button on the remote to turn the massage/heat functions on or off.
  • Massage Modes: Use the 'Mode' button to cycle through the eight different vibration massage patterns.
  • Intensity: Adjust the massage intensity using the '+' and '-' buttons.
  • Timer: Set the massage duration using the 'Timer' button.
  • Heat Function: Activate the lumbar heating function with the 'Heat' button. The heat has three stages.
  • Massage Points: The chair includes 2 shoulder massage points, 2 waist massage and heat points, and 2 thigh massage points.
Close-up of the chair's back and seat with massage points indicated, showing the wired remote control and a diagram of massage zones on a human back.
Figure 4: Wired remote control for activating 6-point vibration massage and 3-stage lumbar heating.
Front view of the chair highlighting the six massage points (blue circles) and the lumbar heat zone (red area).
Figure 5: Visual representation of the 6 vibration massage points and lumbar heat zone.

6. Care and Maintenance

  • Cleaning: For general cleaning, wipe the microfiber cloth and PU surfaces with a soft, damp cloth. For stubborn stains, use a mild soap solution and wipe dry immediately. Do not use harsh chemicals or abrasive cleaners.
  • Casters: Periodically check the casters for hair or debris that may hinder smooth movement. Clean as necessary.
  • Hardware: Regularly check all screws and bolts to ensure they remain tight. Retighten if necessary to maintain stability.
  • Power Cord: Inspect the power cord and adapter for any signs of damage. If damaged, discontinue use and contact customer support.
  • Storage: Store the wired remote in its built-in side pocket when not in use to prevent loss or damage.

7. Troubleshooting

Problem Possible Cause Solution
Chair does not adjust height Gas lift not engaged or faulty. Ensure the lever is fully pulled. If still not working, the gas lift may need replacement.
Massage/Heat function not working Power not connected, remote faulty, or internal wiring issue. Check power adapter connection to chair and wall outlet. Ensure remote is functioning. Contact support if issues persist.
Chair feels wobbly Loose screws or uneven assembly. Check and tighten all assembly screws, especially where the backrest attaches to the seat.
Casters not rolling smoothly Debris (hair, lint) caught in casters. Turn the chair over and carefully remove any obstructions from the caster wheels.

8. Specifications

Feature Detail
Model Number 921-759V70BK
Brand HOMCOM
Color Black
Materials Microfiber Cloth (100% Polyester), Foam, PU
Overall Dimensions 76W x 77D x 115-123H cm
Reclining Dimensions 76W x 134D x 96-114H cm
Seat Dimensions 57W x 52D x 51-59H cm
Back Dimensions 59W x 16D x 73H cm
Footrest Dimensions 38L x 23W cm
Lumbar Support Dimensions 45L x 34W cm
Cord Length (Remote) 1.8 m
Input Voltage 100-240V, 50/60Hz
Output Voltage/Current 12V/1A, 12W
Weight Capacity 400 lbs (181 kg)
Recline Angle Up to 140°
Massage Points 6-point vibration (2 shoulder, 2 waist, 2 thigh)
Massage Modes 8
Heat Function 3-stage lumbar heating
Gas Lift Class Class-3
Wheels PU wheels (suitable for various floor types)
Side-by-side dimension diagram of the HOMCOM office chair, showing overall height, width, depth, seat height, and backrest height.
Figure 6: Detailed dimensions of the HOMCOM Massage Office Chair.
Side view of the chair with a human silhouette illustrating ergonomic support for the neck, shoulders, lumbar, and hips.
Figure 7: Ergonomic design providing support for key areas of the back.

9. User Tips

  • For optimal comfort, adjust the seat height so your feet are flat on the floor or a footrest, and your knees are at a 90-degree angle.
  • Experiment with different massage modes and intensities to find what works best for your needs.
  • Take short breaks and utilize the reclining function and footrest to stretch and relieve pressure during long periods of sitting.
  • Ensure the power cord for the massage function is routed safely to avoid tripping hazards or damage.

10. Warranty and Support

For warranty information, technical support, or to order replacement parts, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

© 2023 HOMCOM. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.