Introduction
Thank you for choosing the 1HORA AUT203 Wireless Earphones. These earphones are designed to provide a high-quality audio experience with the convenience of wireless technology. Featuring Bluetooth 5.3, intelligent touch controls, and a comfortable design, the AUT203 is compatible with both iOS and Android devices. Please read this manual carefully to ensure proper use and optimal performance of your new earphones.
Package Contents
Please check the box for the following items:
- AUT203 Earphones (Left and Right)
- Charging Case
- USB Type-C Charging Cable
- User Manual
- 2 Pairs of Earplugs (Ear Tips)


Specifications
| Feature | Specification |
|---|---|
| Model | AUT203 |
| Bluetooth Version | 5.3 |
| Wireless Range | Up to 10 meters (approx.) |
| Charging Type | USB Type-C |
| Earbud Battery Capacity | 30mAh (3.7V, 0.111Wh) |
| Charging Case Battery Capacity | 250mAh (3.7V, 0.925Wh) |
| Earbud Playback Time | Up to 5 hours on a single charge |
| Total Playback Time (with case) | Up to 17 hours (at 100% volume) |
| Charging Time (Case) | Approx. 1.5 hours |
| Frequency Response Range | 20Hz - 20KHz |
| Impedance Range | Up to 32 Ω |
| Wireless Protocols | AVRCP/HFP/HSP/A2DP |
| Vocalism Principle | Dynamic |
| Material | Metal, Plastic |
| Earbud Weight | Approx. 3.5g (each) |
| Total Weight | 84g |
| Microphone | Yes |

Setup and First Use
1. Charging the Earphones and Case
- Place both earphones into the charging case.
- Connect the USB Type-C charging cable to the charging port on the case and plug the other end into a USB power source (e.g., wall adapter, computer USB port).
- The indicator light on the charging case will show the charging status. A full charge for the case takes approximately 1.5 hours.
- The charging case can provide up to 2 full charges for the earphones.


2. Bluetooth Pairing
- Ensure the earphones are charged.
- Open the charging case. The earphones will automatically enter pairing mode.
- On your device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
- Select "AUT203" from the list of available devices to connect.
- Once connected, you will hear a confirmation tone, and the earphones will be ready for use.
- The earphones will automatically reconnect to the last paired device when taken out of the case, if Bluetooth is enabled on the device.


Operating Instructions
Intelligent Touch Controls
The AUT203 earphones feature intuitive touch controls for managing music playback and calls. The touch sensitive area is located on the outer surface of each earbud.
- **Play/Pause:** Single tap on either earbud.
- **Next Track:** Double tap on the right earbud.
- **Previous Track:** Double tap on the left earbud.
- **Answer/End Call:** Single tap on either earbud during an incoming call or active call.
- **Reject Call:** Press and hold either earbud for 2 seconds during an incoming call.
- **Activate Voice Assistant:** Triple tap on either earbud (if supported by your device).


Audio Quality
Experience deep bass stereo with clear sound, delivered by a large 13mm driver in each earbud.


Call Quality
The lightweight design (each headset weighs only 3.5g) and integrated microphone ensure clear and smooth calls.


Maintenance and Care
- **Cleaning:** Regularly clean the earbuds, especially the ear tips and charging contacts, with a soft, dry, lint-free cloth. Do not use harsh chemicals or abrasive materials.
- **Storage:** When not in use, always store the earphones in their charging case to protect them from dust, damage, and to keep them charged.
- **Avoid Water:** The earphones are not waterproof. Avoid exposure to water, moisture, or extreme temperatures.
- **Battery Care:** To prolong battery life, avoid fully discharging the earphones and charging case frequently. Charge them regularly, even if not in constant use.
Troubleshooting
Earphones not pairing or connecting:
- Ensure both earphones are fully charged.
- Make sure Bluetooth is enabled on your device.
- Turn off Bluetooth on your device, then turn it back on.
- Forget/delete "AUT203" from your device's Bluetooth list and try pairing again.
- Place both earphones back into the charging case, close the lid, wait a few seconds, then open the lid to re-initiate pairing mode.
- Ensure the earphones are within the 10-meter wireless range of your device.
Only one earphone is working:
- Place both earphones back into the charging case and close the lid.
- Open the lid and take both earphones out simultaneously. They should automatically connect to each other.
- If the issue persists, try resetting the earphones (refer to the full user manual for specific reset instructions if available).
Earphones not charging:
- Ensure the charging cable is securely connected to both the case and the power source.
- Check if the charging indicator light on the case is active.
- Clean the charging contacts on both the earphones and inside the case with a dry cloth.
- Try using a different USB Type-C cable or power adapter.
Poor sound quality or disconnections:
- Ensure the earphones are within the optimal Bluetooth range of your device.
- Check for any obstructions between the earphones and your device.
- Ensure there is no interference from other wireless devices.
- Try adjusting the ear tips for a better seal in your ear.
User Tips
- For the best audio experience, ensure you select the correct size of ear tips that provide a snug and comfortable fit in your ear canal.
- To maximize battery life, always place the earphones back into the charging case when not in use.
- Keep your device's Bluetooth settings easily accessible for quick pairing and troubleshooting.
- Regularly update your device's operating system to ensure optimal Bluetooth compatibility and performance.
Warranty and Support
For warranty information and customer support, please refer to the documentation provided with your purchase or contact the retailer/manufacturer directly. Keep your proof of purchase for any warranty claims.