1. Introduction
Thank you for choosing the INSE S7P Cordless Stick Vacuum Cleaner. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new appliance. Please read it thoroughly before first use and keep it for future reference.
2. Product Overview
The INSE S7P is a versatile and powerful cordless stick vacuum cleaner designed for effective cleaning across various surfaces. It features a lightweight design, multiple suction modes, and an advanced filtration system.

Figure 2.1: INSE S7P Cordless Stick Vacuum Cleaner and Included Accessories
Key Features:
- Powerful Suction: Equipped with a 265W brushless motor, delivering up to 26 kPa of deep suction.
- Long Runtime: Up to 45 minutes of fade-free power with a 2500 mAh × 6-cell lithium-ion battery.
- All-in-One LED Display: Provides real-time information on remaining runtime, suction level, clog warnings, and filter-care reminders.
- Versatile Design: Lightweight (2.5 kg), 6-in-1 design with a retractable tube, easily converts from upright to handheld. Features a self-standing design.
- Advanced Filtration: 5-stage HEPA filtration system (Cyclone, Metal Mesh, HEPA H13, Air Outlet Filter) captures 99.99% of particles as small as 0.3 µm.
- 2-in-1 Motorized LED Brush: Adapts to different floor cleaning needs.
3. Package Contents
Before using your INSE S7P, please ensure all items are present in the package:
| Item | Quantity |
|---|---|
| LED Roller Brush | 1 |
| Cordless Vacuum (Main Unit) | 1 |
| Crevice Tool | 1 |
| Retractable Metal Tube | 1 |
| Dust Brush | 1 |
| Adapter (Charger) | 1 |
| Wall Mount | 1 |
| HEPA Filter | 2 |
| Cleaning Tool | 1 |
| User Manual | 1 |

Figure 3.1: Detailed Package Contents
4. Setup and Assembly
4.1 Initial Charging
- Before first use, fully charge the vacuum cleaner. Connect the adapter to the charging port on the main unit and plug it into a power outlet.
- The LED display will indicate charging status. A full charge takes approximately 4 hours.
4.2 Assembly
The INSE S7P features a modular design for easy assembly and versatility.
- Attach the Retractable Metal Tube: Align the metal tube with the main vacuum unit and push until it clicks into place.
- Attach the LED Roller Brush: Connect the LED roller brush to the end of the metal tube. Ensure it is securely fastened.
- Alternative Configurations: For handheld use, attach accessories like the crevice tool or dust brush directly to the main unit. The retractable tube allows for easy adjustment for different cleaning heights.
- Wall Mount Installation: Use the provided wall mount to store your vacuum and accessories. Choose a suitable location and secure the mount to the wall using appropriate fasteners (not included).

Figure 4.1: Versatile Cleaning Configurations
5. Operation
5.1 Power On/Off
- Press the power button on the main unit to turn the vacuum on or off.
5.2 Suction Modes
The INSE S7P offers three suction modes:
- Eco Mode (12 kPa): Provides up to 45 minutes of runtime, ideal for light cleaning and extended use.
- Mid Mode (19 kPa): Offers up to 30 minutes of runtime for everyday cleaning tasks.
- Max Mode (26 kPa): Delivers maximum suction power for up to 15 minutes, suitable for deep cleaning and stubborn dirt.
Use the mode selection button on the main unit to switch between these modes.

Figure 5.1: Battery Runtime per Suction Mode
5.3 LED Display
The all-in-one LED display provides crucial information at a glance:
- Remaining Runtime: Shows the estimated battery life.
- Suction Level Display: Indicates the current suction mode (Eco, Mid, Max).
- Clog Reminders: Alerts you if there's a blockage in the vacuum path.
- Filter-Care Reminders: Notifies you when filters need cleaning or replacement.

Figure 5.2: All-in-One LED Display
5.4 Using Attachments
- LED Roller Brush: Ideal for various floor types, including hardwood, tile, and carpets. The LED lights illuminate dust in dark areas.
- Crevice Tool: Perfect for narrow gaps, corners, and edges.
- Dust Brush: Suitable for delicate surfaces, upholstery, and curtains.

Figure 5.3: 2-in-1 Motorized LED Brush
6. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your vacuum cleaner.
6.1 Emptying the Dust Bin
- Ensure the vacuum is turned off.
- Locate the dust bin release button and press it to detach the dust bin from the main unit.
- Open the dust bin lid and empty the contents into a trash can.
- Close the lid and reattach the dust bin to the main unit until it clicks securely.
6.2 Cleaning the Filtration System
The 5-stage filtration system requires periodic cleaning.

Figure 6.1: High-Efficiency Filtration System Components
- Disassemble Filters: Remove the dust bin and carefully detach the Cyclone, Metal Mesh Filter, HEPA Filter, and Air Outlet Filter.
- Clean Components: Tap off loose dirt from the Cyclone and Metal Mesh Filter. Rinse these components under running water.
- Clean HEPA Filter: Gently tap the HEPA filter to remove dust. If heavily soiled, rinse it under cold water.
- Drying: Ensure all filter components are completely dry before reassembling. This may take up to 24 hours. Do not use the vacuum with wet filters.
- Reassembly: Reassemble the filters in reverse order and attach the dust bin.
6.3 Cleaning the Roller Brush
- Turn off the vacuum and detach the LED roller brush head.
- Remove the roller brush from its housing.
- Use the provided cleaning tool or scissors to cut and remove any tangled hair or debris from the brush.
- Reinsert the roller brush and reattach the brush head.
7. Troubleshooting
If you encounter any issues with your INSE S7P, please refer to the following troubleshooting guide:
| Problem | Possible Cause | Solution |
|---|---|---|
| No Power / Vacuum Not Turning On | Battery is depleted. Not properly charged. | Ensure the vacuum is fully charged. Check charger connection. |
| Weak Suction Power | Dust bin is full. Filters are clogged. Blockage in the tube or brush head. | Empty the dust bin. Clean all filters thoroughly. Check for and remove any blockages. |
| LED Display Not Working Correctly | Software glitch. Battery issue. | Try turning the vacuum off and on again. Ensure battery is charged. If problem persists, contact support. |
| Brush Roll Not Spinning | Hair or debris tangled in the brush roll. Brush roll is damaged. | Clean the brush roll, removing any obstructions. If damaged, contact support for replacement. |
| Vacuum Shuts Off Unexpectedly | Battery overheating or low charge. Clog detected. | Allow the vacuum to cool down and recharge. Check for and clear any clogs. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand Name | INSE |
| Model | S7P |
| Motor Wattage | 265W |
| Suction Power | 26Kpa |
| Runtime | Up to 45min |
| Weight (Product) | 1.7kg |
| Dust Box Capacity | 1-2 L |
| Filter Type | HEPA |
| LCD Display | Yes |
| Bag Or Bagless | Bagless |
| Cord Length | WireLess |
| Special Suction Nozzle | Crevice Nozzle |
| Certification | CE |
| Voltage | 220 V |
| Origin | Mainland China |
| Remote Control | No |
| Color | Purple |
| Package Weight | 3.68kg |
| Package Size (L x W x H) | 45×35×56.5cm |
9. User Tips
- For optimal battery life, avoid fully discharging the vacuum frequently. Charge it after each significant use.
- Regularly check the brush roll for tangled hair, especially if you have pets, to maintain effective cleaning.
- Utilize the different suction modes: Eco for quick clean-ups, Mid for daily dirt, and Max for deep cleaning or stubborn messes.
- The self-standing design is convenient for quick pauses during cleaning without needing to lean the vacuum against a wall.
- Keep spare HEPA filters on hand for quick replacements to ensure continuous high-efficiency filtration.
10. Warranty and Support
For any warranty claims, technical support, or service inquiries, please contact the seller or manufacturer directly. Refer to your purchase documentation for specific warranty terms and contact information.
Manufacturer: Shenzhen Etoe Technology Co., Ltd.
E-mail: Support@etoeofficial.com