COMFAST Outdoor Wireless AP Bridge User Manual

1. Introduction

This manual provides detailed instructions for the installation, configuration, and operation of the COMFAST Outdoor Wireless AP Bridge. This device is designed to provide stable and long-distance wireless transmission for various outdoor monitoring and networking scenarios.

The COMFAST series includes several models with varying specifications:

• CF-E113A V2: 300Mbps, 5.8GHz, up to 3KM transmission, 1*10/100Mbps WAN/LAN RJ45. Features strong anti-interference capabilities.
• CF-E112N V2: 300Mbps, 2.4GHz, up to 1KM transmission, 1*10/100Mbps WAN/LAN RJ45. Offers longer transmission distance in the 2.4G band.
• CF-E130N: 300Mbps, 2.4GHz, up to 1KM transmission, 1*10/100Mbps WAN/LAN RJ45.

This manual primarily focuses on the CF-E113A V2 model, but many instructions apply broadly to the series.

2. Package Contents

Please verify that all items are present in your package. The packaging may be updated without prior notice.

For CF-E113A V2 (2pcs package):

• CF-E113A V2 CPE x 2
• PoE Adapter x 2
• Quick Install Guide x 2
• Power Cable x 2
• Cable Ties x 4

For CF-E112N V2 (2pcs package):

• Outdoor CPE x 2
• PoE Adapter x 2
• Quick Install Guide x 2
• Stainless Steel Ring x 2

For CF-E130N (1pc package):

• CF-E130N CPE x 1
• PoE Adapter x 1
• Quick Install Guide x 1
• Stainless Steel Ring x 2

3. Product Overview

3.1 Interface Description

1. WAN Port: Used for PoE power supply and data transmission.
2. LAN Port: Used for PoE power supply and data transmission.
3. Reset Button: Used to restore the device to factory settings.
4. Indicator Lights: Show the status of the equipment.

3.2 Smart Signal Indicator LED

The four signal LED lights on the device represent the current signal strength received from the peer device. This helps in finding the optimal location to deploy the device and achieve better performance.

4. Setup

4.1 Installation Methods

The COMFAST Outdoor Wireless AP Bridge can be installed using various methods, including pole mounting (with ties or a bracket) and wall mounting.

4.1.1 Pole Mounting (using Ties)

1. Make sure the tie (A) is threaded through the designated slot (B) and adjusted to a suitable position based on the pole's thickness.
2. Install the main equipment on the pole and fasten the ties (A) securely with tension.
3. Press the buckle (E) and remove the cover (C) of the main equipment. Plug the Ethernet cable (D) into the Ethernet port, then fasten the cover (C) back in place.

4.1.2 Bracket Mounting

If using a bracket (purchased separately), follow these steps:

1. Make sure the tie (A) is threaded through the designated slot (B) and adjusted to a suitable position based on the pole's thickness.
2. Install the bracket on the pole. Then, install the main equipment onto the bracket and fasten the ties (A) with pliers for tensioning.
3. Press the buckle (E) and remove the cover (C) of the main equipment. Plug the Ethernet cable (D) into the Ethernet port, then fasten the cover (C) back in place.

4.1.3 Wall Mounting

1. Identify the nail holes (F and G) on the device.
2. Place two nails on the wall at the corresponding positions and hang the CPE onto these nails.
3. Press the buckle (E) and remove the cover (C) of the main equipment. Plug the Ethernet cable (D) into the Ethernet port, then fasten the cover (C) back in place.

4.2 Wired Connection Method

1. Plug the PoE adapter into a power socket.
2. Connect the PoE port of the adapter to the WAN port of the CPE.
3. Connect the LAN port of the PoE adapter to your PC.

4.3 Software Configuration

The wireless bridge software features a user-friendly interface accessible via a web browser.

1. Open your web browser (e.g., Internet Explorer) and enter the default IP address 192.168.10.1 to access the interface settings.
2. Set a login password for security.
3. Navigate to Wireless Settings to change the wireless name (SSID), encryption mode, wireless password, national channel, and channel bandwidth.
4. Click 'Finish' or 'Apply' to save your settings.

4.4 Terminal Mode Setup (AP/STA Pairing)

For point-to-point or multipoint connections, you will need to configure devices as Access Point (AP) and Station (STA).

1. For the STA (Client) device: Turn the mode switch of the CPE to the "STA" position.
2. For the AP (Host) device: Turn the mode switch of the CPE to the "AP" position.
3. Initial Pairing: The base station automatically disables the auto-mate interface after 30 minutes. Please complete the pairing within 30 minutes.
4. Distance for Initial Pairing: The distance between the base station (AP) and the terminal (STA) should not exceed 10 meters during the first pairing to ensure a secure connection. After successful automatic matching, the devices can be installed and used at longer distances.

5. Operating Modes

The COMFAST Outdoor Wireless AP Bridge supports multiple working modes to suit different project requirements and scenarios.

• Bridge Mode: Connects two or more wired networks wirelessly, acting as a transparent link. Ideal for point-to-point connections.
• AP Mode (Access Point): Allows wireless devices to connect to a wired network.
• Repeater Mode: Extends the range of an existing wireless network by retransmitting the signal.
• Router Mode: Functions as a router, providing network address translation (NAT) and managing network traffic.

6. Features and Advantages

The COMFAST Outdoor Wireless AP Bridge offers several key features and advantages for reliable outdoor wireless connectivity:

• High-Speed Stability: Designed for project worry-free operation with high-speed and stable transmission.
• Industrial Configuration: Utilizes high-performance Qualcomm chips and external high-power FEM amplifiers for stable wireless transmission.
• 5.8GHz Anti-Interference: Supports the 5.8GHz mainstream frequency band, improving anti-interference ability across multiple channels for stable data transmission without stalling.
• Professional Outdoor Protection: Adopts an integrated molding shell design, adapting to harsh outdoor environments (wind, sun, rain, snow).
• 48V POE Power Supply: Conveniently powered by a 48V PoE adapter or PoE switch via Ethernet cable.
• Automatic Bridge Pairing: Features one-click pairing for easy transmission, simplifying setup for novices.
• Long Distance Transmission: Achieves 3km point-to-point and point-to-multipoint wireless transmission with full engineering-grade hardware technology and 11dBi high-gain antennas.
• Hidden SSID Safety WiFi: Supports SSID hiding to enhance network security and stability.
• Smart Signal Indicator LED: Provides visual feedback on signal strength for optimal device deployment and performance.
• Multiple Application Scenarios: Suitable for various wireless monitoring scenarios such as elevators, communities, factories, scenic spots, and construction sites, as well as network transmission in districts, scenic areas, villages, and towns.

7. Specifications (CF-E113A V2)

7.1 Model Comparison

8. Troubleshooting

• No Power: Ensure the PoE adapter is correctly plugged into a power socket and the Ethernet cable is securely connected to the CPE's WAN port. Check the power indicator light on the CPE.
• No Network Connection: Verify all Ethernet cable connections. Ensure the PoE adapter's LAN port is connected to your network (e.g., router or PC). Check the WAN/LAN indicator lights on the CPE.
• Poor Signal Strength:
• Ensure there are no physical obstructions (trees, walls, buildings, etc.) between the transmitter and receiver devices, as these can significantly affect signal strength.
• Use the Smart Signal Indicator LEDs on the CPE to adjust the angle and alignment of the equipment for optimal signal reception.
• Pairing Issues:
• During initial pairing, ensure the distance between the AP and STA devices does not exceed 10 meters.
• The auto-mate interface on the base station disables after 30 minutes. Complete the pairing process within this timeframe.
• Cannot Access Web Interface: Ensure your PC is directly connected to the PoE adapter's LAN port (which is connected to the CPE) and your PC's IP address is in the same subnet as the CPE (e.g., if CPE is 192.168.10.1, set PC to 192.168.10.x). Try resetting the device to factory settings if the default IP is not working.
• Device Malfunction: If the device is unresponsive or behaving erratically, try performing a factory reset using the Reset button.

9. User Tips

• Optimal Pairing: For the most reliable initial setup, place the AP and STA devices within 10 meters of each other during the first pairing. This ensures a strong connection before deploying them for long-distance use.
• Clear Line of Sight: Always aim for a clear line of sight between the transmitting and receiving units. Any physical obstructions like trees, walls, or buildings will degrade signal strength and transmission distance.
• Signal Strength Monitoring: Utilize the Smart Signal Indicator LEDs on the device to fine-tune the alignment of your CPEs. More lit LEDs indicate a stronger signal, helping you achieve the best possible performance.
• Software Access: For real-time monitoring and advanced settings, remember that the device's software interface can be accessed from both mobile phones and computers.

10. Warranty and Support

Product specifications and information mentioned in this manual are for reference and are subject to updates without prior notice. This manual is intended as a user guide.

For warranty information, please refer to the warranty card included with your product or contact the manufacturer directly.

Manufacturer: Shenzhen Four Seas Global Link Network Technology Co., Ltd

Address: Room 607-610, Block B Tao JINDI Electronic Business Incubation Base, Tenglong Road, Longhua District, Shenzhen, China

Hotline: 0755 83790059 / 83790659

COMFAST is a registered trademark of Shenzhen Four Seas Global Link Network Technology Co., Ltd. All other trademarks or registered trademarks mentioned in this document belong to their respective owners.