MAONO AME2 Gen2

Contents

MaonoCaster E2 Gen2 Audio Interface Mixer

Model: AME2 Gen2 | Brand: MAONO

1. Introduction

The Maonocaster E2 Gen2 is an upgraded version of our popular podcast and streaming audio console, the E2. It now features dual XLR microphone inputs with dedicated controls for two-person recording, a direct monitor switch, and two mute buttons to further improve user experience and streamline workflows. The E2 Gen2 supports Bluetooth, AUX-In, and music instruments for background music. It also includes eight programmable soundpads to enhance content creativity. Whether you're an experienced podcaster, streamer, musician, or content creator exploring the world of audio, the Maonocaster E2 Gen2 is your ultimate companion.

MaonoCaster E2 Gen2 front and back view
MaonoCaster E2 Gen2 Audio Interface Mixer, showing front and back views with various controls and ports.

This manual provides detailed instructions for setting up, operating, and troubleshooting your Maonocaster E2 Gen2 to ensure you get the best possible audio experience.

2. Product Features

  • Dual XLR microphone input for two guests
  • Instrument and AUX input to enrich your content
  • +60dB Powerful microphone preamp
  • Independent microphone and accompaniment volume control
  • Side chain feature to emphasis vocal
  • Advanced noise cancelling algorithm to reduce ambient noise
  • Two analog and one USB outputs stream to multiple devices
  • USB-C for easier connection with computer and charging
  • Compatible with Windows and macOS
  • Built-in Battery, up to 8 hours of off-grid operation
  • +48V Phantom power support for XLR condenser Microphone
  • 12 levels auto-tone control more accurate vocal
Product features overview
Key features of the MaonoCaster E2 Gen2.

3. Layout and Controls

Familiarize yourself with the various inputs, outputs, and controls on your Maonocaster E2 Gen2.

Top view of MaonoCaster E2 Gen2 with controls labeled
Top view of the MaonoCaster E2 Gen2 showing main controls.
Back view of MaonoCaster E2 Gen2 with ports labeled
Back view of the MaonoCaster E2 Gen2 showing input/output ports.

Front Panel Controls:

  1. XLR Input 1 (Microphone Input): Accepts XLR or 1/4" (6.35mm) plug microphone input.
  2. XLR Input 2 (Microphone and Instrument Input) and High-Z Switch: Accepts XLR microphone or 1/4" (6.35mm) plug instrument input. Use High-Z switch for instrument level devices.
  3. AUX-In: Connect external audio sources (3.5mm TRS to TRS audio cable) for background music.
  4. 3.5mm Line Out: Connects to a powered speaker or other audio device (3.5mm TRS to TRS cable).
  5. 3.5mm TRRS Stream Out: Connects to a smartphone with a headphone jack for recording or streaming (3.5mm TRRS to TRRS cable).
  6. USB-C Data: Supports data transfer with PC and mobile devices.
  7. DC-5V Interface: Provides power and charging. Use a 5V=2A power adapter.
  8. Backlight Switch: Hold for >1 second to turn button backlights on/off.
  9. Power On/Off: Hold for 3 seconds to turn the device on/off.
  10. 3.5mm Headphone Jacks: Connect headphones or headsets (3.5mm TRS or TRRS plug). Microphone input of headset is not supported.

Top Panel Controls:

  1. XLR Input Gain Knob (1), Fader (2), and Mute (3): Rotate gain knob for input gain, slide fader for volume, and use mute buttons.
  2. 48V Phantom Power Switches: Push down for condenser microphones.
  3. Equalizer: Adjusts frequency response of microphone and instrument inputs.
  4. Music Level: Rotate knob to control audio input from 3.5mm AUX-In and Bluetooth sources.
  5. Bluetooth Button: Long-press to enable/disable Bluetooth connectivity.
  6. Soundpads: Eight custom sound effect buttons (approx. 20s recording per button).
  7. Soundpads Level: Control the volume level of soundpads.
  8. Pitch Knob: Controls the pitch effect. Keep at midpoint to turn off.
  9. Reverb Knob (1) and Reverb Presets (2): Controls reverb strength. Turn all the way left to turn off.
  10. Sidechain: Automatically lowers background music volume when you speak.
  11. Sing Along: Two modes: Sing Along (vocals removed from USB-C/3.5mm stream output, not headphones) and Music Only (vocals removed from all outputs).
  12. Dry/Wet Recording: 'Dry' records raw sound, 'Wet' includes applied effects. Default is wet recording.
  13. Loopback: When enabled, USB playback is sent back to the USB connected device. Disabling avoids echoes.
  14. Noise Reducer: Short press for low, then high, then off noise cancellation.
  15. Direct Monitoring Switch: Toggles real-time monitoring of microphone and instrument input.
  16. Headphones Level: Controls headphone output level.
  17. Output Level: Controls level of USB-C (6) and 3.5mm TRRS (5) outputs.
  18. Level Meter Display: Indicates signal level. Green/orange for optimal, red for peaking/distortion.

4. Setup Guide

4.1 PC Connection

  1. Connect your microphones, headphones, and any other required devices as shown in the diagram below.
  2. Use the provided USB-C data cable to connect the Maonocaster to your computer. The computer will automatically detect the device and install necessary drivers.
  3. Access sound settings on your Windows or macOS computer. Set "Maonocaster E2 Gen2" as the default output and input device.
  4. Check settings of your streaming or recording software. Confirm "Maonocaster E2 Gen2" is selected as the default audio input and output device.

Tip:

Connecting your Gaming PC's audio output to the AUX port with a 3.5mm TRS cable, then connecting your Streaming PC with USB-C, allows for a Dual PC streaming setup.

Diagram showing PC connection setup
Diagram illustrating how to connect the MaonoCaster E2 Gen2 to a PC.

4.2 Smartphone or Tablet Connection

  1. Connect your microphones, headphones, and any other required devices as shown in the diagram below.
  2. Use the provided USB-C to USB-C data cable or a 3.5mm TRRS to TRRS cable to connect the Maonocaster to your smartphone or tablet.
  3. Connect an external power adapter rated at 5V∼2A if you need continuous power.

Note:

  • If your phone has no 3.5mm headphone jack, use the official USB-C to headphone adapter provided by your phone's manufacturer.
  • To connect via USB, your mobile device needs to support the standard UAC (USB Audio Class) protocol. Android phones must support and enable the USB host feature. iPhones with a Lightning connector require Apple's Lightning to USB Camera Adapter.
  • Select smartphone models can be charged when Maonocaster is connected to an external power adapter.
  • You can record or stream to two smartphones if you utilize both USB-C output and 3.5mm TRRS output.
Diagram showing smartphone connection setup
Diagram illustrating how to connect the MaonoCaster E2 Gen2 to a smartphone or tablet.

4.3 Bluetooth Connection

This Maonocaster supports Bluetooth music playback. Follow these steps to connect and play music:

  1. Turn on the Maonocaster. The background light of the Bluetooth button will start flashing.
  2. On your phone, go to the Bluetooth menu and search for devices. Look for the Bluetooth device named "Maonocaster E2 Gen 2" and select it to establish a connection.
  3. Once your phone is connected to the Maonocaster, the Bluetooth light will stop flashing.
  4. Play your desired music on your phone.
  5. Open your favorite app to begin recording or streaming.

Note:

The Bluetooth feature is solely for music playback and cannot be used for other purposes.

4.4 Charging

  1. Before using the device for the first time, ensure it is fully charged.
  2. To power and charge the device, use a USB-C cable to connect the DC-5V port to a power adapter rated at 5V∼2A or a power bank.
  3. It is important to stop charging once the battery is full to prevent overcharging.
  4. If you are not using the device frequently, it is recommended to charge it at least every three months to maintain battery health.

5. Operating Instructions

This section details how to use the various features and controls of your Maonocaster E2 Gen2.

5.1 Soundpads (Custom Sound Effects)

The Maonocaster E2 Gen2 provides eight custom sound effect buttons. Each button can record sound effects for approximately 20 seconds.

MaonoCaster E2 Gen2 with soundpad interface
The 8 custom sound effect pads on the MaonoCaster E2 Gen2.

Erasing Existing Sound Effects:

Press and hold any of the previously recorded custom keys for more than 3 seconds. The LED indicator will flash quickly, indicating recording erase state. The light will go out when erasing is completed.

Sound Effect Recording:

First, erase any previously recorded effects. Short press the custom key for erasing; the light will flash slowly, indicating recording state. The light goes out when recording is completed. Short press the key during recording to stop.

Note:

Each custom key has limited storage space. If memory is full, recording stops automatically, and the light goes out.

Playing Custom Sound:

Short press any recorded custom key to play sound clips. The LED indicator stays on until playback is complete. Short press during playback to stop.

5.2 Voice Effects & Reverb

Transform your voice with pitch-changing effects and 6 preset reverbs.

MaonoCaster E2 Gen2 with a laptop and headphones, showing voice effects and reverb
Utilizing voice effects and reverb for enhanced audio.

Sing Along Feature:

This feature has two modes: Sing Along mode and Music Only mode. Short press once for Sing Along, and a second time for Music Only.

  • Sing Along Mode: Vocals are removed from music played through USB-C and 3.5mm stream output, allowing you to sing along without original vocals. Note that vocals are not removed from your headphones in this mode.
  • Music Only Mode: Vocals are removed from USB-C, 3.5mm stream output, and your headphones, creating a "music-only" experience.

Note:

This feature may not work perfectly with all music types; vocal removal may not be optimal for certain songs or genres.

5.3 Noise Reduction

Reduce background noise during recording. Short press to activate low noise cancellation, press again for high noise cancellation, and a third time to turn off noise cancellation. The LED indicator shows the current status.

5.4 Direct Monitoring

You can easily control the monitoring feature by toggling it on or off. If you prefer not to hear the real-time monitoring of the microphone and instrument input, simply press the button to disable the direct monitoring feature.

MaonoCaster E2 Gen2 with a microphone and headphones, showing monitoring feature
The monitoring feature allows you to hear your audio in real-time.

5.5 Dry/Wet Recording

  • Dry Recording: Records sound without any added effects like reverb or pitch correction. Only the raw, untreated sound is recorded.
  • Wet Recording: Includes the applied audio effects. By default, the device is set to wet recording.

5.6 Loopback

If the Loopback feature is enabled, the USB playback will be sent back to the USB connected device. If it is disabled, the USB playback can be heard through the headphones but will not be recorded. Turning off this feature can avoid unwanted echoes.

5.7 Independent Controls

The Maonocaster E2 Gen2 features independent controls for microphone and accompaniment volume, allowing precise mixing.

Independent controls for microphone and music levels
Independent faders for microphone and music volume control.

6. Specifications

Attribute Value
Brand NameMAONO
Model NumberAME2 Gen2
TypeMixers
Voltage rangeUSB (5-20V DC)
Inbox adaptorNo
Built-in BatteryYes
Power SourceOther
High-concerned chemicalnone
OriginMainland China
CertificationCE, FCC, RoHS, KC, WEEE
ConnectivityXLR, 3.5MM TRRS, 6.35MM, USB typeC
Connector TypeXLR to XLR, 1/8inch
Supported SoftwareOBS/Discord/Zoom/Audacity/Youtube/Facebook/TikTok/Twitch
Operating SystemMAC OS, Windows
ApplicationsRecording, Podcasting, Streaming, and Gaming on computers, tablets, and smartphones.
Frequency Response20Hz-20kHz
Headphone Output20mW, 32Ω (1kHz, THD+N=1%)
Battery Capacity2000mAh
Battery LifeAppr. 8h (Highest keypads brightness)
Sample Rate44.1kHz/48kHz, 16bit
Charging Current5V/2A
Charging TimeAppr. 3h
Wireless ConnectionBluetooth 4.2
DimensionL24.5*W15.7*H5.5cm (button included)

7. Accessory List

The following items are included in the package:

  • Maonocaster E2 Gen2 Podcast Console
  • USB A&C to USB C 2-in-1 Cable
  • 3.5mm TRRS Audio Cable
  • User Manual
What's in the box diagram
Contents of the Maonocaster E2 Gen2 package.

8. Troubleshooting

8.1 Cannot boot

  1. Check if the podcast console has power; charge it and then turn it on.
  2. Long press the power button for more than three seconds to turn it on.

8.2 No sound from accompaniment music

  1. Check if the external audio source is connected to the accompaniment interface of the podcast console.
  2. Check if the accompaniment volume control knob on the right is turned on.
  3. Check the volume of the accompaniment device.

8.3 No sound from headphones

  1. Check if the headphone cable is inserted into the correct interface ("headset" or "sound" interface).
  2. Check if the "monitor fader" of the sound card is upwards. Gradually increase the volume by sliding it up.

8.4 No sound from the microphone

  1. Check if the microphone is correctly connected to the microphone interface. If not, try again.
  2. Check if the microphone knob on the left is turned on. Turn the knob clockwise to increase the microphone volume slowly.
  3. Check if the "monitor fader" of the sound card is upwards. Gradually increase the volume by pushing it up.
  4. Confirm with your microphone dealer if your microphone is compatible with this podcast console, or consult MAONO for recommended models.

8.5 No sound in live broadcast

  1. Check if the "recording" knob on the podcast console is turned on, and rotate it clockwise to slowly increase the volume of the live broadcast.
  2. Check if "Maonocaster E2 Gen2" has been set as the default playback and recording device of your live broadcast software.

9. User Tips

  • For optimal sound, ensure both microphones are connected via balanced XLR cables.
  • If experiencing issues with the volume control not responding smoothly, check connections and ensure the fader is clean.
  • The Maonocaster E2 Gen2 provides ample gain for microphones like the Shure SM58, ensuring clear audio.
  • Note that the device prioritizes charging; it may pause operation when connected to power if the battery is low.
  • The AUX input may have limited functionality for separate volume control of incoming streams.

10. Safety Information

To avoid personal injury or property damage, please use this product in a safe environment and observe the following:

  • If you notice product heat, smoke, odor, etc. during use, immediately turn off and disconnect power. Contact the seller for maintenance.
  • Do not modify, disassemble, or repair this equipment yourself to avoid invalidating the product warranty or causing personal injury. Contact the distributor if necessary.
  • Use and store this product in a dry, ventilated, and safe environment. Avoid humid or dusty conditions.
  • Avoid rain and dust entering the product to prevent short circuits. Keep away from fire, collisions, and strong vibrations to prevent irreversible damage.
  • Do not use this product in locations prohibited by law, and follow relevant safety regulations.
  • This product is not a children's toy; keep it out of reach of children.

11. Warranty and Support

Information and data contained in this manual are subject to change without notice. We frequently update product firmware to improve user experiences and performance. The status display and operations may be slightly different among different firmware versions. For the latest user manuals and support, please refer to the information below:

You can also scan the QR code on page 51 of the PDF manual for technical support and more product information.

This device complies with part 15 of the FCC Rules and Industry Canada's licence-exempt RSS standard(s). Operation is subject to specific conditions to avoid harmful interference. Maintain a minimum distance of 20cm from the body when using the product to ensure compliance with RF exposure requirements.

For detailed compliance information, please refer to the full PDF user manual: Maonocaster E2 Gen2 User Manual (PDF)

© 2024 MAONO. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.